Evolution Upgrade Latest Topics

Fatal Crash selecting any Wilco Airbus2 Evolution aircraft

Thu, 31 Dec 2015 12:33:50 +0000

Hi!

I believe I have followed every instructions to the letter and more than once, without antivirus on even, but I am unable to get the airbuses to load with FS2Crew installed.

I have Vista 64Bit and I am using FSX. In case this matters, I am using dx10 steve's fixer.

I have turned off DEP and checked it stayed off, I have turned UAC off ("lever" full down), I have run every installer with admin rights. I have deleted fsx.cfg and let it rebuild a new one, still CTD ("fatal error") after the AC model appears in the display window. I am also starting FS in menu window with a Cessna selected as default and also with 2D panel as default panel.

If I restore the original panel.cfg the buses load.

I first installed Wilco Airbus2 evolution and checked everything is working.

I tried testing after each FS2Crew install step (FS2Crewairbusspecial.exe, fs2crewairbusspecialupdate2.exe, fs2crew_start_center_april_2009_setup.exe and Fs2crew_airbus_evolution_upgrade.exe and the airbus stop loading after the first step, although that could be of it being an older fs2crew version than the aircrafts.

Any suggestions left...? Much appreciated,

I use FS2Crew with Level-D and aerosoft buses without issues.

Alex

airbus loadsheet

Sat, 11 Apr 2015 21:39:37 +0000

I was just wondering of the numbers on the loadsheet for the Wilco Airbus Evo series is supposed to be legible? It's on there but it seems that part of the number is missing. Maybe a font issue? What font is used for that info? Thanx!

-Rick

WILCO A320IAE Gone from FSX after EVO Upgrade

Wed, 14 Aug 2013 06:41:58 +0000

This is blowing my mind. I need the A320IAE for my VA and whenever I install the Wilco Airbus Series 1 Deluxe Upgrade, there are no IAE A320's at all, not even the main Wizzair one. So I had an error and FSX would not start. After a couple of days dinkin around with it, I decided to uninstall everything , including FSX , and start with a fresh install. FSX installs ok. Airbus Series 1 Deluxe installs ok, all aircraft are there as advertised. Then I go to install the EVO Deluxe upgrade and it disappears my A320- IAE The CFM A320 is there, but no other A320 or any of the variations that are supposed to be there, including the Wizzair A320 And I'm talking about seeing these in the aircraft selection within FSX. So, one factor may be that when I installed FSX, I installed to C:\ FSX instead of the default WIN 7 directory, because I'm told there are sometimes problems with things running from out of the protected windows folder. But I made sure when the installers ran, they pointed to the FSX folder. I see the feelThere PIC A320IAE folder in the simobjects/airplanes folder where it is supposed to be, but I only see inside the British Airways A320IAE that comes with AB Series 1 deluxe regular, and it is not showing up in FSX. Did I run Installer as admin? Yes, both. Did you remove read-only attributes from FSX folder? Yes. Did you Disable anti-virus prior to install? Not when I installed FSX, but I remembered to by the time I got to the add-ons. So I kinda feel like Feelthere (ha ha ) is not coping well with the change in the default FSX directory? Maybe?? Corrupted installer? I will re-download the upgrade package from Wilco and see if that makes a diff. Any other tips, trick, or suggestions welcomed and appreciated...

Joe Connolly

KSTL

FS2Crew CTD acrew1.gau from vCockpit

Fri, 29 Mar 2013 19:20:27 +0000

I have tried all of the Evo Wilco buses and am getting the same in all of them (some are acrew1c.gau) if I try to access FS2Crew from the Virtual Cockpit when the aircraft loads. if I switch to the 2d cockpit first and then revert to the Virtual Cockpit it seems to work??

FSX SP2

Wilco Airbus Evolution

FS2Crew Airbus Evolution upgrade

any info would be great

EVOLUTION AND NON EVOLUTION

Wed, 26 Dec 2012 13:08:36 +0000

Hello Brian,

I just purchased and installed the Airbus volume 2 (A330/340) WITH evolution for FS9

I already have Volume 1 (A320 etc.) WITHOUT evolution and WITH FS2Crew installed on my PC

My questions :

1- I suppose I need to buy the FS2Crew Evolution Upgrade

2- Can I expect Volume 1 (without Evolution) to work OK or should I upgrade Volume 1 to Evolution as well (and update FS2Crew afterward) ? If so, do I need to un-install something first?

Sorry if the answer is already shown somewhere but there are so-many sub-forums that I couldn't find it.

Thank you in advance and best regards,

Bruno

PANEL ISSUE AFTER EVO UPGRADE INSTALLES

Sun, 02 Dec 2012 13:59:12 +0000

Hi,

So, i installed Wilco Evolution Airbus 1 & 2. I get in the plane everything look's fine and on the MCP there is this new gauge on the full left side.

After that i install again Fs2crew Airbus SE and after i do the upgrade to Evo. And my panel became the old one like i never installed the Wilco Evolution Airbus. (the gauge on the fully left side of the MCP is not there anymore).

I did restore my panel CGF through the Fs2Crew start center and i can reload my aircraft cause my FS is crashing.

any ideas what is going on?

Using: Fs 2004

OS: Windows 7

Thank you for your help!

Wilco airbus evolution causes machine freezes

Tue, 25 Sep 2012 10:26:29 +0000

Wilco airbus evolution (FSX) v.1 causes machine freezes. I've no idea what's the problem, what I'm looking for, this is very frustrating. I tested PMDG B747, PMDG MD11 and B767 (level d simulation) in the same route several times and definitely problem is in Wilco Airbus. I left my aircraft for app. 10 minutes in "spot" form and after that I heard a short noise and I had a freezes screen. I can't shut down or restart FSX (windows) regularly or by task manager, than I have to hold the power button and shut down the machine. Thanks for your help.

Carnt get to work

Sat, 28 Jul 2012 12:48:35 +0000

Hey,

I just bought the Wilco Evolution series today and the fs2crew special edition and the fs2crew evolution update.

After instillation the A330 booted up fine but when i click to start fs2crew a black box appears in the top left corner and fsx ceases to work.

I have disabled the DEP

thanks

Andrew

Wilco airbus help

Wed, 14 Dec 2011 11:38:11 +0000

I am using Wilco airbus evolution 1..When I take off from the ground I am unable to bank the aircraft. I am currently not using a joystick but I think it is still suppose to turn with keyboard inputs. Also after 2000 or 3000 ft after raising gear and retracting flaps, I try to click the AP1 button but on the ECAM it shows that "auto flight AP off" and sound goes off with red warning light. I cant understand the problem. I cannot engage the autopilot at all. please help....thanks

FS2Crew Evolution Error

Thu, 24 Nov 2011 22:18:18 +0000

Hi Guys: When I installed the upgrade for evolution and the FS2crew Upgrade, something did not go right. On the first use, The Departure Brief Panel comes up totally black and no way to use it. Any Ideas?Don Brashears

Problems

Mon, 14 Nov 2011 17:53:17 +0000

HiI am using evo upgrade on airbus series 1 in virtual cockpit if i minimize to desktop and go back in i hear hear the speaking for e.g the payload sheet nothing appears on screen its a real pain it used to work and has stopped working, i have done reinstall of FSX and both airbus series 1 and FS2crew

Passengers left and right views

Fri, 28 Oct 2011 03:26:48 +0000

When in the left & right passenger's view , what key do u use to return to the cockpit.All the other mini panels have a cross on the corner but not the views.thank you in advance somebody could help meregards Jhaus

Can't Finish Payment

Thu, 27 Oct 2011 00:21:27 +0000

Hi BryanI'm trying to buy the evolution upgrade with a pre paid VISA. I get to the pay now screen but when I click pay now it says that PayPal could not validate the card. I'm not even paying with PayPal. I also just used this card at simMarket and it worked, Any ideas? At simMarket I put the name as GIFT RECIPIENT cause thats what it says on the card and i tried that at the fs2crew website and it still didn't work.thanks Lee

FS2Crew Airbus Evolution

Tue, 04 Oct 2011 03:54:03 +0000

I have been having a problem that the doors are not always closed prior to engine start. Shift E works for the Pax doors but cannot close the cargo and service doors. I must be missing something but it' frustrating going so far and then finding the doors are still open.Using Windows 7 and i5 processor HELP please Jack

FS2Crew:Wilco feelThere Airbus Special Edition and Airbus Evolution Upgrade

Sat, 01 Oct 2011 12:48:52 +0000

Hello everyone I have a little problem I bought I bought Airbus Series Evolution FS2Crew Airbus Special Edition Wilco Feelthere after as well FS2Crew: Airbus Evolution Upgrade installs first FS2Crew Airbus Special Edition Feelthere Wilco Airbus after I start Evolution Upgrade fs2crew start center select Feelthere airbus SE I get the following error (FS2CREW FEELTHRE AIRBUS SPECIAL EDITION NOT oN THIS DETCTED FUNSCTIONS TAB WILL bE INOP) I run and the procedure for operating system with the sevn 64 bir (Command Prompt and choose "run As Administrator".Enter The following command (Copy and Paste is recommended to avoid typos): bcdedit.exe / set {current} nx AlwaysOffnd Prompt) but nothing I hope someone can help thanks so much

Fs2crew not installed in all my cockpits

Sat, 06 Aug 2011 23:19:36 +0000

Hi,can you help me with this issue. I installed Fs2crew for airbus evolution (owning previous version of fs2crew), and my problem is that the installation succeeded in the A333RR, A340CFM and A346RR only, but is not present in any other version. I went into the panel.cfg for those airbus not working, and the fs2crew "window##" lines are not copied in the panel configuration.Is anybody else has this problem? I tried to copy the missing lines from the A333RR to the A332GE panel.cfg but my FS crashes when I try to select the manually modified plane.Please, I need your help!Thanks.Laurent.

Problem with Evolution upgrade

Wed, 13 Jul 2011 11:54:09 +0000

HelloI have installed Wilco Airbus série 1 Delux & Evolution. There is no problemI have installed FS2crew for Airbus + upgrade 2 + Evolution upgrade for Wilco Airbus.When I want to perform the FP on MCDU (like FMGC --> enter LFML/LFPO -->1R), Fs2004 crash and I have a error's message In C/Document.../Microsoft/FS9, two news files are created ? (dxdiag.xml & fs9.cfg.txt)I have uninstalled & re-installed all files Wilco Airbus & FS2Crew.But there is the same problem ??Thanks for your assistance Sorry for my bad english !Jean-François

Evolution Upgrade Released!

Fri, 10 Jun 2011 11:57:44 +0000

Attention FS2Crew Airbus drivers:I've just released the FS2Crew "Evolution" upgrade!!It makes FS2Crew Airbus Special Edition Compatible with Wilco/feelThere's newly released Airbus "Evolution" series Volume 1 and 2.The Evolution upgrade does not add any new features to the software... what it does is make FS2Crew Airbus Special Edition work with Evolution Volume 1 or 2 (or both).Remember!You must have FS2CREW AIRBUS SPECIAL EDITION INSTALLED PRIOR TO INSTALLING THE EVOLUTION UPGRADE!!!Sorry for yelling, but I know someone will buy the Upgrade without owning FS2Crew Airbus Special Edition :( In fact, I may start a pool on this if anyone of you are interested :( Please click here to go the Evolution Upgrade Page.http://www.fs2crew.com/cart/products/FS2Crew%3A-Airbus-Evolution-Upgrade.htmlBest,