Everything looks good except I cannot open the software main window hitting the ALTERNATE STATIC SOURCE (ON/OFF) keyboard assignement (assigned as "C" in controls). ...But I can open it by selecting View>panel in FSX menu bar, and it works great.

So why this issue?

Thanks

I noticed that if you wait until the flight steward comes into the cockpit to let you know that they are ready for pushback the call for cockpit to ground disappears and there is no way to get the call to come back. As a result, I end up having to push back using FSX default pushback with no guidance from FS2crew at all. In order to avoid this from happening you have to click cockpit to ground before the steward comes into the cockpit to let you know that the cabin is ready for pushback. And, if you call cockpit to ground before the steward comes into the cockpit, the steward never comes to the front to let you know they are ready for pushback.

Thanks

I've recently purchased the AS A330 and looking in the Forum it should work with the AS Airbus series. I have the Pro version 4.3. However, when I install the Fs2Crew version, a folder appears in the Fs2Folder of P3d5, in this folder under versions a folder Airbus X is created but with no configurator either in the folder or on my home screen. When I search for it, I find only the uninstall opportunity. I also have the older X version for P3d+, so I think I have the latest FS2Crew release. Can any one advise what I am doing wrong, please? I have P3Dv5.3.

Best,

Keith 

Probably I missed a point, but how to start boarding? Need I to start by my self on the MCDU2 upon the hostess says that we are ready to boarding?

Thanks

Alex

Can someone help me?

I've just purchased FS2Crew Airbus Button edition on Steam for use with FSX:SE.

When I press the Hotkey to open the main panel, I get the following error..followed by a panel that opens but produces no sounds when pressing any buttons.

This is for use alongside the Airbus Steam version.

Hope i find you well,i have just purchased the Aerosoft Airbus A330 Pro to go with the A318,A319,A320 and A321,everything works fine in the smaller buses 

but i have the same issue on every flight in the A330 the FO sets the wrong take off pitch trim setting,i get a config warning and have to set it myself,sometimes its 

a few degrees out,sometimes its so far out its unbelievable,but i get the config warning on every flight.

P3Dv4.5

Button control

With Thanks 

Gary Jones.

Hope i find you well,i have been having this issue the last few flights in the Airbus Pro,when i give the criuse message the FA gives here speach about the in flight service,at exactly the same time.Is there anyway to over come this issue,

Using UK voice and button control.

With Thanks,

Gary Jones.

FS2Crew Button does not appear to be installed for the Airbus X 320/321. If the proggi is installed and you are getting this message, please visit the FS2Crew support forum for assistance. You likely have a common FSX Registry problem.

Can someone help me. Thanks !

I have P3dv5 Hotfix 2 and Areosoft Airbus 320 prof latest rev. installed and have problem to have F2Crew latest rev to run. I have set main button Secondary button in key assignment. Set Airbus configuratior to admin. and by the way same set up as I had in my p3d v4.5 installation and there it run as butter. I have try no so many time with installation reinstall reinstall of P3d and same for Areosoft Airbus. What am I doing wrong with this give me no success?  Please do any of You out there have an idea to let me come around this fail? Please let me know! :)

regards

Folke Ekeroth 

thanks

I' ve bought and intstalled the FS2Cew Aeeosoft A320 Pro version. Unfortunately it doesn't install a configurator. One hour ago I installed the B737 PMGD version, which went flawless. I tried installing as Admin - no success. So your help would be very much appreciated!

KR, Theo Legters

Is there a possibility to turn off boarding sounds like in PMDG 737 ?

Regards,

Unfortunately, when trying to run FS2Crew Button Control on my Aerosoft Airbus X Extended, it always comes up with this error. I have checked that the file is there, and I have followed the troubleshooting guide. I have tried to reinstall it through the Airbus X Configuration tool, and reinstall FSX competently without any luck. 

I have also tried deleting the FSX.cfg file, running FSX and the Airbus Configuration tool in Admin mode, and verifying the game cache through Steam, where I purchased the program.

Also, a Google search came up inconclusive.

Does anyone have a solution? Thanks!

First of all let me tell you, how happy I'm to be back in the air with the new Aerosoft Airbus combined with your product - it's so much more fun, when you have a little company while flying and a co-pilot, who REALLY knows the Airbus-SOPs... 😉 

During the last couple of flights I was wondering if it would be possible to change the "ring"-sound, when the PA is calling the co-pilot for the "cabin ready report", as well as the "door knocking sound" after my food or drink order to the "real" airbus sounds, which can be - for example - heard at 2:06 min and 2:19 min in an offical Airbus-video on youtube called "Airbus Reinforced Cockpit Door Description and Procedure".  I don't know if you would be allowed to use original Aerosoft-sound files in your product, but I think their "door chime"-sound (ASC_DoorChime.wav) is really good. 

Would be really great if you could have a look at it and consider it for a future update. 

Many thanks in advance!

Best regards!

Toby

I just bought the software, but I am not able to start "Before Start Proc". In the CFG button I have a positive audio test and I can run the "Run PF" button (I can hear the FO Flow) but nothing more. After the half an hour preflight everything stays silent. Do I have to activate the internal checklists of the airbus itself?

Peter

João Peralta

Any assistance in resolving this issue would be greatly appreciated.

Extra note: I purchased and installed the Aerosoft Airbus A318/19 and A320/21 via the steam store, however I purchased FS2Crew via their website.

Eventually found the configurator in the steam tools library but it says I don't have fs2crew installed despite the fact I do. Any thoughts?

How can I adjust the size of the OSD for the Airbus version?

I'm looking around in my directories for the FS2Crew Button configurator, as I'm familiar with the NGX version, which I have. Can't find it. 

Getting frustrated - please help. Thanks.