Ken.

I may have lost the plot, but I cannot find where to purchase the FS2Crew for AS CRJ Professional. I see on the main site there is an option to buy the all the products in one package but not a single option for the CRJ. I have all bar three of the FS2Crew products and do not wish Maddog or Ifly so that is not an option for me. I see AS sell it on their main site.  Can anyone help as I wish to buy the AS aircraft.

Best,

Keith

Is your idea to release FS2CREW products for all future MSFS aircraft? more specifically the CRJ as that's first up for the sim, if so do you know roughly how long it will take to release after the CRJ is available?

fs2crew first officer always make a call check for flaps 8 on the pretaxi check (the call out) but flaps 20 is selected. no mater what it configure, he always is going to say flaps 8 confirm isntead of flaps 20.

On the other hand would be nice that in the same logic but on the approach, FO would have a speed check and do not select the config ordered i case of being above the maximum speed for that configuration. and to add the callout speed check when he is configuring the flaps. 

cheers

VERSION 1.1A Released:

Fixes:  Internet version check removed from the Config Manager.  However, the in game FS2Crew panel still performs a version check via the internet.

NOTAM:  30 January 2021

VERSION 1.1 Released:

Fixes:  CTD on exiting the sim some users experienced (hopefully) eliminated.

NOTAM:  30 October 2020

FS2Crew for the Aerosoft CRJ Professional has been released!

Download it now at: www.fs2crew.com

The new CRJ version is one of my personal favorite FS2Crew's!

The SOP modelled was created by a real-world CRJ First Officer.  The procedures are a bit unique from what you're used to (mainly Boeing and Airbus style procedures), so the CRJ version feels a bit fresh and new if you've used to the old FS2Crew's.

That said, if you're coming from some of the other FS2Crew's, you'll need to read the Tutorial well.  There are differences that will be new to you.

As usual, Voice and Button Control are combined into a single package.

There are three voice sets: US, UK and EU.

The US voice set is my personal favorite. 

Our US CRJ consultant pilot recorded his voice and he sounds especially good in the CRJ (he should, I guess, he flies it probably 80 hours a month) 😉 

Product Requirements:

Aerosoft CRJ "Professional" version for P3D v4 and v5.


For FSX users:

We may be adding support for the FSX version of the old Aerosoft CRJ 700/900X version in the future, but no promises. 

love the crj fs2crew, just getting started.

I noticed in the manual states I can select the "CALL" button in the virtual cockpit to speak to the cabin crew. Can I only make request use the buttons commands or can I use voice commands?

Same goes for the ground power. I cannot find a physical button in the cockpit to call ground but I believe it to be the "Mech" button next to the right FMS. 

http://www.smartcockpit.com/docs/CRJ-00_and_00-Communications.pdf see page 9

1. After cleared to lineup and wait by ATC is their no cleared to enter runway check? PF announces "Cleared to line up ..." and maybe a respond checked by the FO? example

2. Is there no takeoff check for "lights and strobes"? Or is this another silent action performed by the PF with no checks on this particular airlines SOP? 

3. Climb thrust check when set? I have heard that usually when climb thrust is set its announced by the PF and checked by PM. Just wanted to check again that this is omitted from this airlines SOP.

4. When originating: Mach and Stab trim are disengaged, are those items not part of any checklist with this SOP to engage them at some point?

5. Are there more SOP options planned for the future? e.g. American, another European airline?

again love the software.

Cheers

Philip

We're holding a video contest with a 100 euros in prize money!

Just make a video showing off the new FS2Crew for the CRJ working together, and if you're the best, you'll win 100 euros!

Deadline is November 15th.

Just upload your submissions to YouTube and send us the link so we can see it!

Regards,

Hans

Regards,

Mike Heidler

If the FS2Crew Config manager does not display  the "Enable" FS2Crew buttons, it means the Config Manager cannot locate your panel.cfg file.

There's actually a debug.txt file created beside FS2Crew CRJ Config Manager exe that'll show you were FS2Crew is looking.

99 percent of all users will not have a problem, but if you've done a custom install of the CRJ, moved files/folders around, it can trip up the system.

Here's how you can add FS2Crew manually to the CRJ.

First, make you sure you own the CRJ "Professional" version.  Some users reported this issue, but the problem was they didn't have the "professional" version of the CRJ installed.

Located your panel.cfg file for your desired model.  You can open the panel.cfg file with notepad.

Add these entries (copy and paste).  Keep the window numbers in sequence:

In the [Window Titles] Section...

window17=FS2Crew Main Panel
window18=FS2Crew Secondary Panel
window19=FS2Crew Panel Switcher

and at the very bottom of the panel.cfg file, goes this...

//FS2Crew windows

[Window17]
size_mm=1075, 51
window_size= 0.5599, 0.0425
window_pos=0.00,0.05
visible=0
ident=1000
zorder=100
sizeable=1
gauge00=FS2CrewCRJ64!FS2Crew_MainPanel, 0,0,1075,51
gauge01=FS2CrewCRJ64!FS2Crew_Audio, 20,20,5,5
gauge02=FS2CrewCRJ64!FS2Crew_VoiceMain, 10,10,5,5

[Window18]
size_mm=402, 639
window_size= 0.2093, 0.5325
position=3
visible=0
ident=1001
zorder=105
sizeable=1
gauge00=FS2CrewCRJ64!FS2Crew_SecondaryPanel, 0,0,402,639

[Window19]
size_mm=190, 179
window_size= 0.098, 0.1491
position=6
visible=0
ident=1002
zorder=106
sizeable=1
gauge00=FS2CrewCRJ64!FS2Crew_PanelSwitcher, 0,0,190,179

//FS2Crew windows end

My name is Raffaele- First, compliment, great product!

I just noticed a strange thing 

Is it normal that FO answers (during the checklist) answers with a weird quick speed (and voice, in my opinion)?

Thank you

Raffaele

Let me preface this post by stating I have all of your products and I have never had any issues with any of them.  I just finished installing fs2crew crj for P3Dv5 and I cant seem to get the FS2crew main panel to load.  I have the autofeather command set to "N" as suggested in the manual, but nothing happens when I press it.  I also have this same command mapped to a button on my controller and I also get nothing when I press it.  I should note, in the other aircraft I own where fs2crew is installed, pressing the "N" button loads the main panel without issue.  What am I missing here?  And before you ask, yes....I have experimental updates checked and the CRJ is up to date (at least I think it is....it shows I have version 2.2.0.2 installed).  Pls help!

ZK

You must have the experimental updates installed: