[CG not within tolerance] Tried everything...

[Guest martap]

I have this problem with the 737 and now with the 747. I tried the loadmanager but that didn't help. I checked all earlier posts but nothing helps.Here is my aircraft.cfg.. I'm going crazy, just bought this one and now this one is also giving me problems. PLEASE HELP !!![WEIGHT_AND_BALANCE]empty_weight = 394088.0max_gross_weight = 875000.0max_landing_weight = 630000.0max_zerofuel_weight = 542500.0CG_forward_limit=0.130CG_aft_limit=0.331 reference_datum_position = 112.714, 0.0, 5.502 // (feet) Boeing Section2.0 reference position (RefPos)empty_weight_CG_position = -97.85, 0, 0 // (feet) from RefPos 19.75% MACmax_number_of_stations =50;Moments of Inertiaempty_weight_pitch_MOI = 17018677.379279empty_weight_roll_MOI = 15962454.863936empty_weight_yaw_MOI = 16890566.121607empty_weight_coupled_MOI = 2048.0station_load.0=720, -95.55, 1.59, 0.00, First Deckstation_load.1=2340, -97.85, -0.08, 8.00, Upper Deckstation_load.2=1980, -97.85, -1.73, 0.00, Busn Deckstation_load.3=20340, -98.00, -0.63, 0.00, Econ Deckstation_load.4=35000, -97.11, 1.19, -8.00, Cargo Deck

[Guest Pilfer8]

here's 2 of many things that can cause this.1)Are you using FSPassengers? If you are, I had the same problem with the demo version, but I don't know what the fix is.2) You are overweight and runnung full tanks with an overload on ZFW.Hope it helps a little.Dan

[Guest martap]

Dan, thnx for your reply....I don't use FSPassengers.I don't think I'm overweight, all numbers are black in LoadManager...

[Guest Pilfer8]

well hopefully someone else can chime in and solve it. Those are the two things that caused that problem for me.Good Luck

[Guest tomahawk_pa38]

Had this problem myself with the 737. If I ignored the message, it would disappear during climb-out and not come back on that perticular flight. Had to uninstall/reinstall in the end I think - or maybe I deleted the FS9.cfg file - can't remember but the later is worth a try.

[Guest serbans]

Hi !I've had this problem as well, and it looks like some software I installed changed the locale configuration of the number grouping and decimal symbol (they were switched). Once I reverted to decimal symbol being dot (.) and number groupping being comma (,), everything went back to normal.You can try this to see if this solves your problem.Serban