747 x toga problem

[Vic1 3]

when i press toga after manually increasing the throttles to 70% the n1 and epr jumps up and down and will not reach the correct thrust setting. Only when i press toga from engine idle does it perform correctly and smoothly no fluktuationshas anyone else seen thisi have the latest patch kav

[Guest HeavyMetal]

One question. Is your autothrottle switched on when you click on the toga? If not there lies your problem.. I personally have not experienced that situation..------------------------------------------------------------------Joe"It's not the fall that kills ya. It's the sudden stop at the end"http://www.precisionmanuals.com/images/forum/pmdg_trijet.jpg

[Vic1 3]

Yes the auto throttle is definately switched on, i thought it may be to do with the pmdg overide options for throttle but it happens with this selected or notkavkav

[cavaricooper 2,615]

Kav:I'm guessing that its a mapping issue- try TOGA and manually move the throttles full forward- see if that allows for correct thrust settings. Make sure you monitor to prevent exceeding limits/over spooling.Best-Carl F. Avari-Cooper BAW0225http://online.vatsimindicators.net/980091/523.png| XP Pro SP3 | 2 x APC UPS | Coolermaster Stacker 830 SE | Gigabyte P35 DS3R | e8500 @ 4gHz | Tuniq Tower 120 | EVGA 8800GT 512MB | Creative X-Fi Fatal1ty | 2 x 1 GB Corsair XMS2 | 2 x 320GB WD Caviar RAID 0 | Corsair HX620W PS | CH Products Yoke-Pedals-Throttle Quadrant | Aerosoft 747MCP-EFIS-EICAS |