Jump to content
Sign in to follow this  
crosswind

New X850XT PE.....Fluctuating FPS......ok-ish performance!!!!!!

Recommended Posts

Guys, I just bought a new X850XT PE nice boost from 9800 non-pro. However, I am getting the same FPS I was getting with my old card. This is what is weird.....when I set the FPS slider to 20 or 25, my FPS register at 12 or below and intermittently fluctuates to 18 for a split second. Flying is not bad, but not fluid, and luckily I do not experience any stutter.Now if I increase the FPS slider to 40 or 50 the FPS will increase to about 18, and if I go to unlimited it locks at 23....and jumps intermittently to 66. This still does not produce fluid simulation (workable but not fluid). Any suggestions?Here is my Rig Specs..... My system is not that slow yet PIV 3.06 Prescott Abit IC7-G Max Advanced II ThermalRight XP120 Cooling Heat sink 1 Gig 3200 DDR 400 Geil Ram Audigy Sound Card ATI X850XT PE (I have tried latest Omega and ATI 5.6 drivers)Matrox G400 Millenium dualhead video card 2 21" monitors 2 17" monitors PFC Column Yoke PFC Cirrus Yoke (for dual station ops) CH products Rudder pedals at both stations Elite King Air Throttle Quadrant Nostromo N52 Gamepad ...for TRIM Wheel applicability Networked to two other PCs... 1. Instrctor station 2. Panel visuals machine for dual ops trainingAny help would be greatly appreciated.....Thanks


KROSWYND    a.k.a KILO_WHISKEY
Majestic Software Development/Support
Banner_MJC8.png

Sys 1:  AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2:  i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware:  Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM grip
SIMULATORS: MSFS2020/XP12/P3D v5.4 & v6:  YouTube Videos

Share this post


Link to post
Share on other sites

No luck. Still Getting the same results.


KROSWYND    a.k.a KILO_WHISKEY
Majestic Software Development/Support
Banner_MJC8.png

Sys 1:  AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2:  i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware:  Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM grip
SIMULATORS: MSFS2020/XP12/P3D v5.4 & v6:  YouTube Videos

Share this post


Link to post
Share on other sites

Yep...sure is. Antec TrueBlue 480watt PSU


KROSWYND    a.k.a KILO_WHISKEY
Majestic Software Development/Support
Banner_MJC8.png

Sys 1:  AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2:  i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware:  Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM grip
SIMULATORS: MSFS2020/XP12/P3D v5.4 & v6:  YouTube Videos

Share this post


Link to post
Share on other sites

no. Do you mean the aTI 4.7s. anything special or srecific about them?


KROSWYND    a.k.a KILO_WHISKEY
Majestic Software Development/Support
Banner_MJC8.png

Sys 1:  AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2:  i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware:  Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM grip
SIMULATORS: MSFS2020/XP12/P3D v5.4 & v6:  YouTube Videos

Share this post


Link to post
Share on other sites
Guest NPreston

I'm in a similar situation. I went from a 9700 pro to an X800XT and I'm getting similar performance on my X800XT as I was with the 9700 pro. I have tried the ATI 5.7 and 5.6 drivers and I'm now getting some what better performance with the 4.12's. Very interesting. Nick Preston :-abduct

Share this post


Link to post
Share on other sites

I found my Problem.....WHEW!!!!!!!I un-insalled and re-installed my FSUIPC (registered, but before I re-installed, I did a search on my PC for all FSUIPC related files (of which I had several laying around. Also I think the real culprit was a FSUIPC_reg.bin file which is placed by default on the C: drive. I somehow inadvertently compied this file into the modules folder sometime wayback last year, and it stayed there and "festered"Now what I have been doing is just copying the new FSUIPC.dll files into the "modules folder" so that I would not have to re-enter my registration code , etc. instead of removing all the FSUIPC files from my modules folder. As the good old saying goes, "it does not pay to take the short route ....all the time"I now have rock solid performance...locked at 25FPS. Thnks for all the help guys. I am now going to download the latest Vatalyst drives and see how they perform. Wish me luck!!!!


KROSWYND    a.k.a KILO_WHISKEY
Majestic Software Development/Support
Banner_MJC8.png

Sys 1:  AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2:  i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware:  Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM grip
SIMULATORS: MSFS2020/XP12/P3D v5.4 & v6:  YouTube Videos

Share this post


Link to post
Share on other sites

You should find that it will "SCREAM" along quite nicely.I am running the same card and all the settings maxed with A1 quality Ai and it rarely struggles.


Flight Simulator - MSFS2020 | Operating System - WIN 10 Pro |  HDD - 1 x Samsung 970 Evo Plus 1TB NVME M.2 (OS) - 1 x WD Blue 1TB NVME M.2 (Software) - 1 x WD Blue (SMR) 2TB 3.5 SATA (Storage) | Main Board - MSI MAG B550 TOMAHAWK | CPU - AMD Ryzen 7, 5800X (3.8Ghz) Un-clocked | RAM - 64GB G.Skill Trident Z Neo RGB DDR4 3600Mhz | Video Card - MSI GeForce RTX 3080 Gaming X TRIO 10GB Monitor - SAMSUNG 49" LC49RG90 ULTRAWIDE | VR Headset - HP Reverb G2 |  Case - Corsair 5000D Airflow | CPU Cooling - Corsair ICUE H115i Elite Cappelix 280MM | Power Supply - Gigabyte AORUS AP850GM 850W 
Controls - Honeycomb Alpha Yoke & Honeycomb Bravo Throttle Quadrant + Thrustmaster TCA Sidestick Airbus Edition + CH Products Pro Pedals 

f70zmw-6.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...