ATC vectoring to wrong runway

[Guest]

Hello all! I went through this once before, and Jim replied with a solution that worked great...for a while. I am having problems once again with the FS 2002 ATC vectoring me to land on a runway, and the tower giving me clearance to land on an entirely different runway. I even tune in ATIS, and it is correct, yet the online ATC keeps doing this.I just upgraded to the latest version of Active Sky, I have FSUIPC 2.975, and run Ultimate Traffic as well.Any suggestions would be greatly appreciated!Thanks again all!A bewildered semi-newbie!

[David Vega 348]

Increase the Forced Range parameter in the options. Also ensure the parameter "Disable all Wx Updates When Forced" is checked. See if this works for you.I'm having this problem, even with above mentioned stuff done, when flying into KTLH. I do have MyTraffic, but there are no overlays or anything like that on KTLH. Dave Vega

[Damian Clark 1,139]

Hi,Also make sure you are using the destination FORCE mode. Enter your destination ICAO ID and click the FORCE checkbox to do this. Otherwise the wx will never force to your destination at the proper distance to provide consistent ATC instructions..-Damian[table border=0" cellspacing="30" cellpadding="0][tr][td align = "left"]Damian ClarkHiFi Simulation SoftwareDeveloper of ActiveSkyThe next-generation weather environment simulation for FS2002!http://hifi.avsim.net/activesky[/td][td]http://hifi.avsim.net/activesky/images/wxrebeta.jpg][/td][/tr][/table://http://hifi.avsim.net/activesky/ima...[/tr][/table

[Guest]

yes this worked for me i went into kewr today, and they vectored me to 22L and as i contacted newark tower shure enough they cleared me for 4R arrival. i did these fixes to the options and badabing it worked.