Connection problem

[AndrewB 7]

I have spent the last 3 hrs trying to get ASX to connect to FSX. I have triple checked all setting and can get simconnect to connect to AI traffic as per the test in the manual. Everything checks out OK but cannot get any weather to display in FSX. I have attached 2 logs files one is the log from ASX and the other in a edited version of simconnect log. The original file was nearly 1 Meg. I really need help with this. I would credit myself with reasonable network knowledge... what am I missing.Andrew

[Guest Carl Hackman]

Hi AndrewCould you show us what you have in your simconnect.cfg and also simconnect.xmlHave you opened the ports on the server and client?Plus could you give us the location where you have put each file.ThanksCarl Hackmanhttp://www.hifisim.comhttp://www.hifisim.com/banners/hifi-dev-sigbanner.jpg

[Damian Clark 1,234]

Hi Andrew,I just noticed in your log that there is another weather application running... this can be causing conflicts.. are you using FSInn or Squawbox etc? If so you need to disable weather them to allow ASX to set the weather. Can you confirm?Best,

[AndrewB 7]

I was suprise to hear that another weather program was running not sure where this is comming from I only have ASX installed. Can you tell by the log what it is?Andrew

[AndrewB 7]

Server (running FSX) Application DataMicrosoftFSX<?xml version="1.0" encoding="Windows-1252"?>SimConnectSimConnect.xmlFalseFalseIPv4global

192.168.1.102

645004096FalseFalseAutolocalC:Document and SettingsAndrew BrownMy Documents[simConnect]Protocol=IPv4Address=192.169.1.102Port=500MaxReceiveSize=4096DisableNagle=0I am assuming the ports are open (disabled all firewalls) How do I check this?Regards,Andrew

[AndrewB 7]

Just to be clear SimConnect is running on the client where ASX is installedAndrew

[arrvoo 6]

Andrew i noticed that in your simconnect.xml your address is 192.168.1.102 and in the simconnect.cfg the address is 192.169.1.102 Could this be the problem?Harvey

[JSkorna 137]

That may do it.Jimhttp://www.hifisim.com/banners/hifi-community-sigbanner.jpghttp://www.hifisim.com/

[AndrewB 7]

Guys,Progess has been made, I have been able to connect to FSX... thanks for the pickup. I still appear to have a problem I cannot get the X Gauage to display and data. I am not sure if it has anything to do with the log. See attached log from ASXThanks for your help.Andrew21:15:08: Starting depiction output to FSX21:15:15: Exception received: 1421:15:25: Exception received: 1421:15:26: Exception received: 1421:15:37: Exception received: 1421:15:46: Exception received: 1421:15:54: Exception received: 1421:15:56: Exception received: 1421:16:00: Exception received: 1421:16:02: Exception received: 1421:16:15: Exception received: 1421:16:18: Exception received: 1421:16:20: Exception received: 1421:16:42: Exception received: 1421:16:49: Exception received: 1421:16:49: Exception received: 1421:16:51: Exception received: 1421:17:00: Exception received: 1421:17:02: Exception received: 1421:17:07: Exception received: 1421:17:13: Exception received: 1421:17:24: Exception received: 1421:17:25: Exception received: 1421:17:26: Exception received: 1421:17:43: Exception received: 14

[arrvoo 6]

Funnily enough i had this same problem(Exception received:14) but it seemed to just disappear. There is a thread below/above where a fix was posted for this.I do however have the problem with the X Guage not working. It just stays with a blank screen and "New Imagery Downloading" on it, but no map. Also i get no voice playback on tuning channel 122.00 although i do get this 16:22:24: Voice script playback complete16:22:37: Starting voice script playback...16:22:37: Voice script playback complete16:22:51: Starting voice script playback...16:22:51: Voice script playback completeconstantly in the log, showing that it sees the channel is tuned to 122.00.If i run ASX on the same machine as FSX i have no problems at all, everything works fine, but on a network i experience these 2 problems above.

[JSkorna 137]

Hi Andrew:Download this:http://dreamcatcher.hifisim.com/DownloadStations.zipUnzip the file and put it here:C:Program FilesHiFiXEngineASXThen start ASX and let it process. Then start FSX.Please let us know,Jimhttp://www.hifisim.com/banners/hifi-community-sigbanner.jpghttp://www.hifisim.com/

[JSkorna 137]

Hi arrvoo,Can you confirm that ASX and FSX are communicating across your network?Thanks,Jimhttp://www.hifisim.com/banners/hifi-community-sigbanner.jpghttp://www.hifisim.com/

[AndrewB 7]

Jim,Fixed.. Everthing is working fine. Thanks for all your helpRegards,Andrew

[arrvoo 6]

Yes that seems fine, i can generate weather and I get ASX messages in my FSX. And i get Voice messages in the log whenever i turn 122.00 on or off, i just don't get the actual sound.

[JSkorna 137]

Hi,Is X Gauge now working?Thanks,Jimhttp://www.hifisim.com/banners/hifi-community-sigbanner.jpghttp://www.hifisim.com/