Jump to content

Sign in to follow this  
Guest tatankamani

A320 - how landing it

Recommended Posts

Guest tatankamani

Hello All,I am have problems, landing the A320 on airports without ILS. It is no problem to execute an autoland on airports with ILS, but my

Share this post


Link to post
Share on other sites
Guest vrandar

I recommend you get hold of approach plates for the airports you fly in to and follow the instructions in them re altitude etc. You will also need to be quite confident in your use of selected heading and speed.

Share this post


Link to post
Share on other sites
Guest tatankamani

High Rob,thank you for your reply. My primary problem is, what is the correct way, controlling the speed i.e. with Auto Throttle ON or manually ? An additional question is, is there any way to operate (turn) the speed knob besides mouse klicking right or left ?Thank youBruno

Share this post


Link to post
Share on other sites
Guest vrandar

Autothrust should be ON. It is possible to control the thrust manually but there are very few occasions when you would need to do this and it distracts you from other tasks at a critical time. Airbus provide autothrust so use it.For the speed knob question go to flight simulator 9PSSA3XXA320PanelConfig which opens the panel config utility. Scroll down to the MCP speed items and you can set a keyboard shortcut for the push, pull, increase and decrease.

Share this post


Link to post
Share on other sites
Guest tatankamani

High Rob,thank you very much again, it is definitely that, I wanted to know.Bruno

Share this post


Link to post
Share on other sites

Hi Bruno,There is no problem at all landing the A320 manually or any other commercial jet for that matter. Landing using the auto-pilot and auto-land is fine but it doesn't teach someone how to really fly...one needs practice to get the feel of the airplane on full manual.I just landed a 747-400 manually today and with an airport with no ILS at all but I did use the FS2004 GPS until the runway was visible. I always land manually and this is the fun of FS anyways - to get that priceless satisfaction of controlling an airplane ALL BY YOURSELF with no computer help. Here's my suggestion for your manual landings:-use autopilot until you are about 10,000 feet AGL then switch to manual - FULL manual. At about 235KIAS (maximum) you can lower the flaps to 1 and make sure your speed is going down.-Descent rate should be approximately 5 times your KIAS speed (some use ground speed for this). But also take into account your distance from the runway. -At top of descent, when you first begin your descent, VSI should be around 2000fpm, gradually being reduced to 800fpm or less on the final and then to just 20-50fpm before touchdown.-Should slow down gradually (N1% is less important than actualy IAS but N1 should be around 40-60% during the approach and even less to slow down). Airbuses glide much more than Boeings (at least the A320 in comparison to its Boeing cousin, the 737) so it is normal procedure to use the SPOILERS if required to slow down to the desired speed.-Use the 3 TO 1 RULE constantly and check yourself against it as you descend. For example: You should be 6000ft AGL at 18NM from the airport; 3000ft AGL (above ground level) at 9NM, 1500ft AGL at 4.5NM.-Speed: I slow down to 180KIAS by about 15NM from touchdown, then gradually go to 160KIAS, then close to your VREF - say 140KIAS at touchdown.-Do NOT use SPOILERS below about 1000-2000ft AGL as the plane can crash due to sudden altitude loss. Also, try to use the RUDDER not the ailerons to make fine course adjustments to stay aligned with the runway. Banking the plane is not recommended so close to the airport as it is too abrupt a change in direction.-All this time, you should keep N1 fairly constant at, say 50-60% and use pitch to control speed and flaps to slow down and spoilers to slow down if flaps are insufficient. Cutting thrust can stall the plane.Hope this helps.John


I love flying my "iddy biddy Jumbo"

 

CPU: Intel Core 2 Duo E8400, socket 775/3GHz/1333MHz bus/6MB cache

MOBO: Asus P5E3 Deluxe WiFi-AP@n/Intel X38 chipset

RAM: 4GB Kingston HyperX 1333MHz. rated 7-7-7-20, matched pair (2 x 2GB)

GRAPHICS: Sapphire Radeon 5770HD 1GB (w/ fan)

MONITOR: Samsung 24", 2494HM LCD wide-screen 1920x1080

SOUND: SoundBlaster Audigy 2 ZS

HARD DRIVES: 1xWestern Digital WD1600JD SATA 160GB (primary/Windows XP and system boot drive)

1xWestern Digital WD3200AAJS SATA2 320GB (secondary/Flight Simulator 2004 running off WinXP Pro 32-bit, games video editing drive)

1xWestern Digital 500GB Black series SATA2 (Windows 7 64-bit: FSX is running off Win7; Windows XP Professional 32-bit)

CASE: Antec Sonata III 500W

OS: Windows 7 Professional 64-bit for FSX; Windows XP Pro 32-bit for other things.

Share this post


Link to post
Share on other sites
Guest FreeBee1979

This is how I would land the A320:- Autopilot and FD ON till Long final/Downwind- Autothrust ON all the time, Speed managed- At about 15 NM from touchdown activate approach phase (if not automatically), This will get your speed back to Green Ball speed- Once at Green Dot speed and about 10 miles out, Select flaps 1- When at S speed, select Flaps 2- Glidepath on a normal approach will be about 3 degrees.- So e.g. while flying at 2000' and 6 NM out you will start your final descent- Just prior to final descent disengage the autopilot and FD.- Gear down- Select FPA ON (The BIRD) and -3.0 degrees. - Follow the bird with autothrust on. Adjust the FPA if you're high or low- After Gear down and at F speed, select flaps 3- At around 1000' AGL select flaps FULL and landig checklist- At 25' thrust IDLE and start the flare (2-3 degrees nose up)- At touchdown Thrust to full reverse- At 70 kts Thrust REV IDLE- Before 20 kts AUTOBRAKES off (if selected)Hope this helpsRegardsJeroen Sengers

Share this post


Link to post
Share on other sites
Guest vrandar

I agree that it can be done in the A320 and indeed I do it myself occasionally. But the PSS A320 family is not that forgiving on full manual thrust and it is best to leave it on autothrust and concentrate on other aspects of the approach. You post doesn't indicate if you have actually flown the PSS 320 so apologies if you have, but sometimes it's better to use the systems that Airbus provide rather than proving you have skills that might be more suited to other types.

Share this post


Link to post
Share on other sites
Guest tatankamani

Hello,thank you all, for your recommendations, how to execute manual landings. With some basic information, it is not as difficult, as I thought.Thank you again.Bruno

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    22%
    $5,550.00 of $25,000.00 Donate Now
×
×
  • Create New...