A330 have 4 engine on E/WD when use other livery............

[Guest Juen-shian Gau]

When I start the A332 GE........not use the house color....the E/WS show 4 engine...BUT Whan I use the house color......it work for two engine.....I already tried the resetup the FSUIPC.dll and set the default flightto MSFS default flight.....But it's no use when using other livery..I have to use the house color first, and change to other livery....HOW I can do??Thank you for your help... Carl Taiwan 20050409

[Guest Phoenix_7]

try deleting the filesmodulesFSUIPC.inimodulesFSUIPC.dllre-install only FSUIPC.dll fromwww.schiratti.com/dowsonJohn PSS SUPPORTsupport@phoenix-simulation.co.ukhttp://www.avsim.com/pss/phoenix.jpg

[Guest Juen-shian Gau]

no use ^^||It's my Aircraft.cfg below....I use the "A330-340_FDE_v1.2J_by_Bob_Scott"[fltsim.0]title=PSS A330-200 GE Houseui_variation=PSS A330-200 GE Housesim=A332ui_type=A330-200 GEsound=GEmodel=GE332texture=houseatc_airline=PRO AIRpanel=checklists=atc_id=AB332atc_flight_number=PS332atc_heavy=0ui_manufacturer=Airbusvisual_damage=1description=PSS A330/A340 Pro Series With R.E.A.L Features. COPYRIGHT 2002 PHOENIX SIMULATION SOFTWARE[fltsim.1]title=PSS A330-200 EVA AIRui_variation=PSS A330-200 EVA AIRsim=A332ui_type=A330-200 GEsound=GEmodel=GE332texture=A332GEEVAAIRatc_airline=EVApanel=checklists=atc_id=atc_flight_number=atc_heavy=0ui_manufacturer=Airbusvisual_damage=1description=PSS A330/A340 Pro Series With R.E.A.L Features. COPYRIGHT 2002 PHOENIX SIMULATION SOFTWARE[fltsim.2]title=PSS A330-200 PW Houseui_variation=PSS A330-200 PW Housesim=A332ui_type=A330-200 PWsound=PWmodel=PW332texture=houseatc_airline=PRO AIRpanel=checklists=atc_id=AB332atc_flight_number=PS332atc_heavy=0ui_manufacturer=Airbusvisual_damage=1description=PSS A330/A340 Pro Series With R.E.A.L Features. COPYRIGHT 2002 PHOENIX SIMULATION SOFTWARE[fltsim.3]title=PSS A330-200 RR Houseui_variation=PSS A330-200 RR Housesim=A332ui_type=A330-200 RRsound=RRmodel=RR332texture=houseatc_airline=PRO AIRpanel=checklists=atc_id=AB332atc_flight_number=PS332atc_heavy=0ui_manufacturer=Airbusvisual_damage=1description=PSS A330/A340 Pro Series With R.E.A.L Features. COPYRIGHT 2002 PHOENIX SIMULATION SOFTWARE//////////////////////////////////////////////////////////////////////44ab4522259be42bf2100f135fc2f393[LIGHTS]//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing light.0 = 4, 80.0, 0.0, 4.5, PSS_VC[exits]number_of_exits=2exit_rate.0 = 0.4exit_rate.1= 0.4[Views]eyepoint = 78.0, -1.8, 5.5[General]atc_type = AIRBUSatc_model = A332performance =[pitot_static]vertical_speed_time_constant=99[GROUND_REACTION]MAX_STEERING_ANGLE = 72[GeneralEngineData]engine_type=1Engine.0 = 12,-30,-6Engine.1 = 12, 30,-6fuel_flow_scalar = 0.782min_throttle_limit = -0.25[jet_engine]thrust_scalar = 1.0[EFFECTS]wake=fx_wakewater=fx_spraydirt=fx_tchdrtconcrete=fx_sparkstouchdown=fx_tchdwn, 1[direction_indicators]direction_indicator.0=3,0[Radios]Audio.1=1Com.1=1, 1Com.2=1, 1Nav.1=1, 1, 1Nav.2=1, 1, 0Adf.1=1Transponder.1=1Marker.1=1[Flaps.0]type = 1span-outboard = 1.0extending-time = 20system_type = 1flaps-position.0 = 0 flaps-position.1 = 8flaps-position.2 = 14flaps-position.3 = 18flaps-position.4 = 22flaps-position.5 = 32damaging-speed = 240 blowout-speed = 260 lift_scalar = 0.001drag_scalar = 0.001pitch_scalar= 0.001[Flaps.1]type = 1span-outboard = 1.0extending-time = 20system_type = 1flaps-position.0 = 0 flaps-position.1 = 2flaps-position.2 = 8flaps-position.3 = 14flaps-position.4 = 25flaps-position.5 = 32damaging-speed = 240 blowout-speed = 260 lift_scalar = 0.7drag_scalar = 1.0pitch_scalar= 1.0[forcefeedback]gear_bump_nose_magnitude=3000 ; 0 - 10000gear_bump_nose_direction=18000 ; 0 - 35999 degreesgear_bump_nose_duration=250000 ; in microsecondsgear_bump_left_magnitude=2700 ; 0 - 10000gear_bump_left_direction=35500 ; 0 - 35999 degreesgear_bump_left_duration=250000 ; in microsecondsgear_bump_right_magnitude=2700 ; 0 - 10000gear_bump_right_direction=00500 ; 0 - 35999 degreesgear_bump_right_duration=250000 ; in microsecondsground_bumps_magnitude1=1300 ; 0 - 10000ground_bumps_angle1=08900 ; 0 - 35999 degreesground_bumps_intercept1=3.0ground_bumps_slope1=0.20ground_bumps_magnitude2=200 ; 0 - 10000ground_bumps_angle2=09100 ; 0 - 35999 degreesground_bumps_intercept2=1.075ground_bumps_slope2=0.035crash_magnitude1=10000 ; 0 - 10000crash_direction1=01000 ; 0 - 35999 degreescrash_magnitude2=10000 ; 0 - 10000crash_direction2=9000 ; 0 - 35999 degreescrash_period2=75000 ; in microsecondscrash_duration2=2500000 ; in microseconds[WEIGHT_AND_BALANCE]reference_datum_position = 0.0, 0.0, 0.0max_number_of_stations = 50 pss_num_class = TWO_CLASS // Load Editor Cfg Valuestation_load.0 = 450, 0.0, 0.0, 0.0 //Weight Crew (lbs) LEAVEstation_load.1 = 3000, 0.0, 0.0, 0.0 //Weight Galleys (lbs) LEAVEstation_load.2 = 12438, 0.0, 0.0, 0.0 //Weight Baggage (lbs)station_load.3 = 9167, 0.0, 0.0, 0.0 //Weight Cargo (lbs)station_load.4 = 0, 0.0, 0.0, 0.0 //Weight First Class (lbs)station_load.5 = 3600, 0.0, 0.0, 0.0 //Weight Business Class (lbs)station_load.6 = 31350, 0.0, 0.0, 0.0 //Weight Economy Class (lbs)empty_weight = 265000empty_weight_roll_MOI = 4000000empty_weight_pitch_MOI = 14500000empty_weight_yaw_MOI = 13000000empty_weight_coupled_MOI = 2000empty_weight_CG_position = 0.0, 0.0 , 0.0max_gross_weight = 507000***************************************************[fuel]Center1 = 5.0, 0.0, -4.0, 12500, 1043LeftMain = -5.0, -20.0, 0.0, 12150, 949RightMain = -5.0, 20.0, 0.0, 12150, 949 fuel_type = 2number_of_tank_selectors = 1electric_pump = 1[airplane_geometry]wing_area = 3892wing_span = 163wing_root_chord = 23.85wing_dihedral = 6.0 wing_incidence = 0.0wing_twist = 0.0 oswald_efficiency_factor = 0.625wing_winglets_flag = 1wing_sweep = 30wing_pos_apex_lon = 30wing_pos_apex_vert = 0htail_area = 933htail_span = 70htail_pos_lon = -82.0htail_pos_vert = 0.0htail_incidence = 0.0htail_sweep = 0.0vtail_area = 650.0vtail_span = 28.0vtail_sweep = 33.0vtail_pos_lon = -82.0vtail_pos_vert = 8.0elevator_area = 95.0aileron_area = 39.0rudder_area = 155.0elevator_up_limit = 30elevator_down_limit = 18aileron_up_limit = 25aileron_down_limit = 25rudder_limit = 45.0elevator_trim_limit = 20spoiler_limit = 35spoilerons_available = 1aileron_to_spoileron_gain = 0.5min_ailerons_for_spoilerons = 10.0min_flaps_for_spoilerons = 0.0 //0 Class <0=none,1=wheel, 2=scrape, 3=float> //1 Longitudinal Position (feet) //2 Lateral Position (feet) //3 Vertical Position (feet) //4 Impact Damage Threshold (Feet Per Minute) //5 Brake Map (0=None, 1=Left, 2=Right) //6 Wheel Radius (feet) //7 Steer Angle (degrees) //8 Static Compression (feet) (0 if rigid) //9 Max/Static Compression Ratio //10 Damping Ratio (0=Undamped, 1=Critically Damped) //11 Extension Time (seconds) //12 Retraction Time (seconds) //13 Sound Type //14 Airspeed limit for retraction (KIAS) //15 Airspeed that gear gets damage at (KIAS) [contact_points]point.0=1.0, 75.5, 0.00, -14.6, 1574.8, 0.0, 1.312, 75.0, 1.0, 1.50, 0.257, 10.0, 10.0, 0.0, 0.0, 0.0point.1=1.0, -12.21, -18.3, -15.2, 1574.8, 1.0, 1.512, 0.0, 1.0, 1.50, 0.688, 17.0, 17.0, 2.0, 0.0, 0.0point.2=1.0, -12.21, 18.3, -15.2, 1574.8, 2.0, 1.512, 0.0, 1.0, 1.50, 0.688, 15.0, 15.0, 3.0, 0.0, 0.0point.3=2.0, -14.16, -47.3, 0.00, 787.4, 0.0, 0.000, 0.0, 0.0, 0.00, 0.000, 0.0, 0.0, 5.0, 0.0, 0.0point.4=2.0, -14.16, 47.3, 0.00, 787.4, 0.0, 0.000, 0.0, 0.0, 0.00, 0.000, 0.0, 0.0, 6.0, 0.0, 0.0point.5=2.0, -54.00, 0.0, 2.83, 787.4, 0.0, 0.000, 0.0, 0.0, 0.00, 0.000, 0.0, 0.0, 9.0, 0.0, 0.0point.6=2.0, 42.66, 0.0, -3.75, 787.4, 0.0, 0.000, 0.0, 0.0, 0.00, 0.000, 0.0, 0.0, 4.0, 0.0, 0.0point.7=5.0, 0.00, 0.0, 0.0, 1600.0, 0.0, 0.000, 50.0, 0.0, 0.00, 1.000, 1.0, 1.0, 0.0, 0.0, 0.0static_pitch=0.5static_cg_height=13.015gear_system_type=0[TurbineEngineData]fuel_flow_gain = 0.005inlet_area = 54.5rated_N2_rpm = 29920static_thrust = 69700.0afterburner_available = 0reverser_available = 1 max_contrail_temperature = -30[keyboard_response]elevator = 150, 250aileron = 150, 250rudder = 150, 250[autopilot]autopilot_available = 1flight_director_available = 1default_vertical_speed = 800autothrottle_available = 1autothrottle_arming_required = 0autothrottle_takeoff_ga = 8autothrottle_max_rpm = 105pitch_takeoff_ga = 10max_pitch = 10.0max_pitch_acceleration = 1.0max_pitch_velocity_lo_alt = 2.0max_pitch_velocity_hi_alt = 1.5max_pitch_velocity_lo_alt_breakpoint = 20000.0max_pitch_velocity_hi_alt_breakpoint = 28000.0max_bank = 25.0max_bank_acceleration = 1.8max_bank_velocity = 3.0max_throttle_rate = 0.1nav_proportional_control = 9.0nav_integrator_control = 0.25nav_derivative_control = 0.0nav_integrator_boundary = 2.5nav_derivative_boundary = 0.0gs_proportional_control = 9.5gs_integrator_control = 0.26gs_derivative_control = 0.0gs_integrator_boundary = 0.7gs_derivative_boundary = 0.0yaw_damper_gain = 1.0[Reference Speeds]flaps_up_stall_speed = 155full_flaps_stall_speed = 115cruise_speed = 460max_indicated_speed = 350.0max_mach = 0.84[brakes]toe_brakes_scale=0.5parking_brake=1[gear_warning_system]gear_warning_available = 0pct_throttle_limit = 0.1flap_limit_power = 25.5flap_limit_idle = 5.0[hydraulic_system]electric_pumps = 0engine_map = 1, 1, 0, 0normal_pressure = 3000[stall_warning]type = 1[attitude_indicators]attitude_indicator.0 = 1[turn_indicators]turn_indicator.0 = 1, 0[flight_tuning]cruise_lift_scalar = 1.06parasite_drag_scalar = 1.0induced_drag_scalar = 1.0elevator_effectiveness = 1.0aileron_effectiveness = 1.0rudder_effectiveness = 1.0pitch_stability = 1.0roll_stability = 1.0yaw_stability = 1.0elevator_trim_effectiveness = 1.0aileron_trim_effectiveness = 1.0rudder_trim_effectiveness = 1.0THX!!

[Guest MrMach]

Same problem here but instead of four I see only two in my a340.:(thanks.

[Guest vrandar]

MrMach, make sure your general engine data section has four engines as follows:engine_type=1Engine.0= -7 , -63, -1.5Engine.1= 15.8, -30, -5.5Engine.2= -7 , 63, -1.5Engine.3= 15.8, 30, -5.5fuel_flow_scalar = 0.8245min_throttle_limit = -0.25Rob Elliott, EGPE InvernessPSS Airbus Support andAirbus Fleet Training Captain, British Airways Virtual airbus@speedbirdonline.co.ukhttp://www.speedbirdonline.co.uk/airbus.htmlhttp://www.bavirtual.co.uk

[Guest vrandar]

Juen-shian Gau, just a thought but are you using exactly the same .air file for each of the aircraft. If not then line 311 of the .air file for Eva air is probably showing engines=4 instead of engines=2. But if you have only one .air file covering all the A330-200s then it's not that and I'll have to think again.Rob Elliott, EGPE InvernessPSS Airbus Support andAirbus Fleet Training Captain, British Airways Virtual airbus@speedbirdonline.co.ukhttp://www.speedbirdonline.co.uk/airbus.htmlhttp://www.bavirtual.co.uk

[wad53 3]

Juen-shian, You need to change the title line in the aircraft.cfg to include the engine type. eg. title=PSS A330-200 EVA AIRshould read title=PSS A330-200 GE EVA AIRMrMach, You probably need to add CFM to the title section.Warren

[Ralgh 43]

>try deleting the files>>modulesFSUIPC.ini>modulesFSUIPC.dll>>re-install only FSUIPC.dll from>>www.schiratti.com/dowson>>John >PSS SUPPORT>support@phoenix-simulation.co.uk>>http://www.avsim.com/pss/phoenix.jpgFor the record I had the same problem as MrMach and John's solution is what worked for me.