Sign in to follow this  
Guest G3oW0RK

This descent rate is strange

Recommended Posts

Hello,First of all, i don't have anymore the problem i had with FSUIPC.dll on the climb rate. The solution is simply to use the version installed with the A3XX Base pro package (5.4) and to check that "Disco A/P axis" is not checked on the technical table in the option of the modules.Still one problem, i can't manage to get a nice descent rate. When the descent arrow approach, i select the correct altitude writen on the MCDU on the F-PLAN page then i knob the select altitude button and the descent start with a descent rate of -5000/-6000 feet. It's a bit too much isn't it?So my question is: When i pull the knob altitude selection button, does the a/p adapt the descent rate to get the selected altitude at the next waypoint or could it end the descent sometimes 10 or 15 nm before the waypoint.Please enlighten my life :).Regards,Geoffrey "G3oW0RK" BALDET

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Try this: _before_ reaching the "top of descend" arrow in flight plan, set the altitude to minimum, which is 10, and push the knob. Watch the magenta dot on the right side of ND - the plane should be trying to keep it in the middle.Vadim Rapp

Share this post


Link to post
Share on other sites
Sign in to follow this