Jump to content
Sign in to follow this  
Guest glenally

plane will not fly properly (pss airbus)a32x

Recommended Posts

Guest glenally

my plane will not fly properly it keeps pitching up and down without me controlling it(this is in the air)and on the ground i put my trim to -2.0 UPcan anybody help meplz

Share this post


Link to post
Share on other sites

forum rule is sign your post.give the thread listed below a read:http://forums.avsim.net/dcboard.php?az=sho...=3769&mode=fullthis next thread also covers more ideas on how to use the forum -http://forums.avsim.net/dcboard.php?az=sho...g_id=5351&page=--


D. Scobie, feelThere support forum moderator: https://forum.simflight.com/forum/169-feelthere-support-forums/

Share this post


Link to post
Share on other sites
Guest sanadi

Well had that problem too. Seems to get worse the more turbulence there is and happens only to PSS Airbus panels.Changing and smoothing the weather does not cut it for me.However there seems to be a workaround for this problem.**WARNING**This I found from searching the forums and this workaround is definately not supported by PSS.Anyway here's what I did.1. Change to that size_mm=2,2 thing2. When PSS panel loads, open the MCDU and *right click* the INIT page.3. You will get some parameters. Press NEXT PAGE on MCDU until you get to a page that says G-load on LSK2 and Autotrim on RSK2.4. Below Max Acceleration, input 1.05. Below Max Decelaration, input 0.86. Below Max Controller Changer, input 1007. Now left click INIT page.I've tried this and able to fly using A/P and manually with relativy minor oscilation. The airplane seems more stable.However you need to this on every flight as the setting is not saved.Try it, Regards,Adi.

Share this post


Link to post
Share on other sites
Guest glenally

hey again can i just ask what the (size_mm=2,2) thing isglenally

Share this post


Link to post
Share on other sites

this comes from the first thread i posted above -[blockquote]NormanB Mon Apr-11-05 12:52 PM #3928, "RE: PSS Airbus Eradic Pitching"In response to Reply # 7 Gents,As already passed to George a few days ago (I somehow missed this thread) simply open up panel.cfg in your pss-abpro folder. Look for the section entitled Specifically the line size_mm=1,1Change it tosize_mm=2,2Save. Start FS. Fly.NormanPSS SUPPORTMicrosoft FS MVPsupport@phoenix-simulation.co.uk[/blockquote]--


D. Scobie, feelThere support forum moderator: https://forum.simflight.com/forum/169-feelthere-support-forums/

Share this post


Link to post
Share on other sites
Guest glenally

heythanks everybody who helped i canged the (size_mm1,1 to size_mm 2,2)and that is me up and flying again.thanks again glenally

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...