Jump to content

Sign in to follow this  
Guest DaveI

PFD/ND details on approach

Recommended Posts

Guest DaveI

Hi PSS When on approach with ILS tuned and active :-1. The top left corner of the PFD shows ILS info with a line through it in yellow.2. The ND shows ILS info on top right The identifier is as tuned on the CDU NavRad page and dme info is ok, but the course readout always shows 000,not the approach course as tuned.Are these readouts correct and if so what do they mean ?

Share this post


Link to post
Guest Phoenix_7

if the ILS is setup properly you shouldn't have the line through itare you pressing DEP ARR and selecting the arrival runway?also make sure your default flight is set correctly as per the 'sticky' postJohnPSS SUPPORTsupport@phoenix-simulation.co.ukhttp://www.avsim.com/pss/phoenix.jpg

Share this post


Link to post
Guest DaveI

Thanks for the info.Setup is O.K. as are CDU ops. I tried the tutorial again to be sure.ILS info on the PFD is O.K if AUTOTUNE is operational but course readout on ND in approach mode is still stuck on 000.One solved....still one to go !!Regards

Share this post


Link to post
Guest Phoenix_7

if the ILS has a DME it will show at the top left corner of the PFD, once tunedthe ND should not show any ILS info, the VOR L and R entries on the NAV RAD page should not accept ILS frequencies, and not show ILS CRS info, this is an error in the productJohnPSS SUPPORTsupport@phoenix-simulation.co.ukhttp://www.avsim.com/pss/phoenix.jpg

Share this post


Link to post
Guest DaveI

Thanks John Another one for "the list" ?Best Regards

Share this post


Link to post
Sign in to follow this  
×
×
  • Create New...