Sign in to follow this  
Guest nfeist

help please

Recommended Posts

I have 2 problems with 777 Pro Boxed version:1 - ATC works fine until I open the radio page and try to tune Com 1 and 2. The dials turn but freq remains unchanged. Also, I cannot listen to ATIS or atc although I see Com 1 tuning the freq to the requested2 - ILS tuning - Nav 1 and 2 tune to the selected ILS but there are no GS or NAV needles on ILS so it is impossible to autoland or fly the needles. I have tried to approach airports at 2500 feet to see if I can capture ILS but it simply isnt there.Thanx for your help.Nuno

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

>I have 2 problems with 777 Pro Boxed version:>>1 - ATC works fine until I open the radio page and try to tune>Com 1 and 2. The dials turn but freq remains unchanged. >Also, I cannot listen to ATIS or atc although I see Com 1>tuning the freq to the requested>>2 - ILS tuning - Nav 1 and 2 tune to the selected ILS but>there are no GS or NAV needles on ILS so it is impossible to>autoland or fly the needles. I have tried to approach>airports at 2500 feet to see if I can capture ILS but it>simply isnt there.>>Thanx for your help.>>NunoHello Nuno:You have to setup the default Cessna flight with the BATT on, the AVIONICS Switch on and the ENGINE running. This does not mean you have to start that flight, set it all up, back out and start your 777 flight, the default flight just needs to be setup like this.Have you tried this and then tried your radios?

Share this post


Link to post
Share on other sites

Hello Terry,Thank you very much for your prompt reply.I have tried as you suggested. ATC works fine (clearances, ATIS, etc) until I open the radio page, then....nothing works. I only open the radio page as I approach the DEST aiport to listen to ATIS. As soon as I open it all aural ATC communications cannot be heard although Com 1 tunes in to whatever I request via the FS2004 ATC window. The only thing I can

Share this post


Link to post
Share on other sites

>Hello Terry,>>Thank you very much for your prompt reply.>>I have tried as you suggested. ATC works fine (clearances,>ATIS, etc) until I open the radio page, then....nothing works.> I only open the radio page as I approach the DEST aiport to>listen to ATIS. As soon as I open it all aural ATC>communications cannot be heard although Com 1 tunes in to>whatever I request via the FS2004 ATC window. The only thing>I can

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this