Type IV Icing Pull Call

[Guest eicas]

Hello thereI'm having problems getting the correct post type IV de-icing rotation calls to play. I go through all the procedures as outlined in the manual but when I come to press the second button for the Pull command I get the call to STOP.There seems to be no way for me to get the Pull command and subsequent 5-degree pitch check.Could the procedures and button presses be checked, as I'm sure I'm following the steps outlined in the manual.Cheers, Tom (EGCV)

[byork 2,259]

Hello Tom,You must call "Rotate" before hitting the secondary button to call "Pull!!!"Calling "Rotate" is a necessary pre-condition.Another necessary condition is that the ATR be configured for Level II anti-ice. If icing conditions exit or are anticipated to exist below the acceleration altitude, the FO should configure the a/c for Level II anti-ice when you start Engine 1 as per his flow.As you've discovered, if you click the secondary button "prior" to calling "Rotate", you will call "Stop".Hope that helps,Bryan