Choosing Departure Type

[awralls 5]

Bryan,Thanks for FSCrew - it's a brilliant concept, extremely well executed. Well done!Everything works as advertised for me, but I do have a question. Now that you've introduced the concept of forcing the user to select a proper departure type (ICAO-A or -:(, it would be helpful to have some guidance as to which one should be selected and under which conditions. My surmise is that the -A departure is flown in more stringent noise abatement conditions because it demands a climb to a higher altitude before levelling off. I checked a few departure plates and, at least in Europe, I couldn't find anything on them specifying a departure type, but several did mention that noise monitoring was in effect so I figured that those would be the ones where you'd use the -A type. Make any sense?Grateful for any advice you could render.CheersAndy RallsNorth Yorkshire

[Guest BenBaron]

Hi Andy,you can find the procedures of ICAO A and ICAO B and how they are flown in the profiles manual and the sprague manual... .I think, the ICAO B departure is used under more strict noise abatement procedures as you have to level off very early at 1000ft to reduce to CLB Thrust which is more quiet. On an ICAO A departure you fly with takeoff power and much noise up to 3000ft before really reducing thrust, but don't really know... ;-). And what you say also makes sense :-).

[awralls 5]

Thanks Ben. Actually, I'm pretty comfortable with "how to's"... it's more an issue of the "why's" that's got me puzzled. This is stuff that I've never had to bother with in 23 years of flight simming which, in itself, is a complement to FSCrew as it's got me thinking about real world procedures because I now HAVE to. Andy RallsNorth Yorkshire

[Guest wee_davie_2612]

Hey,There seems to be specific noise abatement procedures for each different airport in the UK. For example this one is for Glasgow (EGPF)Expidite climb to 1500ft before reducing power to maintain a minimum rate of climb of 500ft/min until 3000ft.Whereas Bristol (EGGD)Climb straight ahead until 3000 before turning right.You can get the specific data for each airport from the Nats AIS site. It is in the textual data for each airport in the AIP sectionHope it helps,David

[byork 2,259]

Hello Andy,On the Jepp 10-7 page, under general airport info, there will be a note if you have to use the Special A ICAO procedures, if not, then standard B procedures apply. (This is airline specific of course).Flaps 5, ICAO B in VNAV will be the profile you use most.Cheers,Bryan

[awralls 5]

Thanks Bryan - that's perfectly clear now.CheersAndy RallsNorth Yorkshire