Problems when using "slew" mode

[mrcaveman 1]

Problem: After I use the "y" key to "slew" move the aircraft to a location, say to a parking spot, then use the "y" key to quit the slew mode the aircraft then travels at a high speed and won't stop. This happens on some aircraft not all. What needs to be done so the aircraft will not race across the screen in a uncomanded move.KSPIThanks, CP

[kjb 0]

You need to adjust the sensitivity of your joystick or rudder pedals in slew mode. You can also turn off your controllers for slewing and use th e keyboard instead. Under options/controllers, there are settings for normal flight and slewing.

[drayton_k 7]

Try pressing F1 before you come out of slew mode. This sets the aircraft down on the ground correctly.Keith

[Guest JohnPaulJones]

> You can also turn off your controllers> for slewing and use the keyboard insteadHighly recommended! =)

[mrcaveman 1]

Thanks everyone for your help. I must say I completely forgot about the F1 to ensure the aircraft is on ground level. It works fine using F1. Thanks again allKSPI

[Guest melf12]

Thanks drayton_k,That's a load of my mind, been giving me hassle for weeks.Great tip thank you,Ken