Sbuilder205 wont compile a bgl..HELP!

[Guest Lucky]

Hi AllIve re formatted my PC installed XP PRO again.Ive got FS9 installed.FS9 SDK,sBasic Runtime 6 Activated my FSUIPC and installed SCASM.Than I regesterd Sbuilder.I open existing projects to edit and it wont create a bgl.Checked the path to my FS9 and all is good. Im lost now, I just cant figure whats going wrong.No matter what I do, even created a test project and still no bgl.Any ideas.Thanks AlFlight Ontario

[meshman 109]

I left FS9 behind a couple of years ago, so any of the specifics have been purged from my memory banks. But you might double check with the SBuilder installation tutorial, available here; http://www.scruffyduckscenery.co.uk/tutorials.html

[Guest Lucky]

I left FS9 behind a couple of years ago, so any of the specifics have been purged from my memory banks. But you might double check with the SBuilder installation tutorial, available here; http://www.scruffyduckscenery.co.uk/tutorials.html

Thanks meshMan.That was the problem. I use SbuilderX mostly but have to jump back every once in a while.I did not remember what I needed but that link brough it all back. Its working fin e now.Again Thanks for replying.Al SibleyFlight Ontario

[scott967 62]

Is this vector/object data? If yes, does it create any .scm files or SCAERROR.LOG?scott s..

[Guest Lucky]

SBuilder uses resample from the sdks for raster data, but needs to have scasm installed for vector and object data.http://www.scasm.de/scott s..

Thanks ScottGot it installed and all is working perfect.This time I wrote everything I need on the front page of my Tutorial I have on my shelf.Al

[Luis Hernandez 569]

Sorry for hijacking the thread, but I've got a similar issue: I'm trying to make a photo scenery, so I insert the map .bmp , calibrate it, select the LOD13 tiles I'll be using (all tiles fully covered by the map) and then compile. However, I get a compilation error, I get the tiles but I won't get any .bgl :(. I have scasm.exe installed in the /Tools subfolder, as I read on various forums. It doesn't matter if I'm trying to do a standard map (4.8 m/pixel) or a high resolution map (2.4 m/pixel... my image has not enough resolution for 1.2 m/pixel), I'm getting the compilation error. Did I do something wrong?Best regards from Colombia,Luis Miguel

[Guest luissa]

Hello Luis,Please tell if you get an error (say a crash) or if you do not find the BGL. Note that BGLs go to folders that depend on the folder's settings. Also check this folderC:\Programas\SBuilder205\Tools\WorkFiles are generated there and then copied to final destinations. In that folder you can also get the source files that are generated. Hope that helps,Luis

[Luis Hernandez 569]

Luis, I tried again from scratch and this is the error that I get: "There was a compilation error in this project! Do you want to read a SCASM report?" I press OK and this is what I get:---------------

Error in line 3 -> VTPFileHeader( 0x100 ) -> unknown commandError in line 5 -> VTPTextureList( 1 "253" 1 0 0 4 ) -> unknown commandError in line 9 -> VTPArea( 1 1 3 11 ) -> unknown commandError in line 10 -> VTPLayer( 5 1 1 0 ) -> unknown commandError in line 11 -> VTPTexID( 0 0 ) -> unknown commandError in line 12 -> VTPPolyCount( 69 ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 29 * 255 + 4080 ] [ 22 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 29 * 255 + 4335 ] [ 22 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 29 * 255 + 4335 ] [ 22 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 29 * 255 + 4080 ] [ 22 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 22 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 22 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 22 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 22 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 27 * 255 + 4080 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 27 * 255 + 4335 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 27 * 255 + 4335 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 27 * 255 + 4080 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 28 * 255 + 4080 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 28 * 255 + 4335 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 28 * 255 + 4335 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 28 * 255 + 4080 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 29 * 255 + 4080 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 29 * 255 + 4335 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 29 * 255 + 4335 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 29 * 255 + 4080 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 18 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 18 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 20 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 20 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 20 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 20 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 19 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 19 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 31 * 255 + 4335 ] [ 19 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 31 * 255 + 4080 ] [ 19 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 19 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 19 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 19 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 19 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 3 -> VTPPoly( 2 4 0 ) -> unknown commandError in macro file VTPm2Custom.scm line 4 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 20 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 5 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 20 * 255 + 4080 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 6 -> VTPPointXY( [ 30 * 255 + 4335 ] [ 20 * 255 + 4335 ] ) -> unknown commandError in macro file VTPm2Custom.scm line 7 -> VTPPointXY( [ 30 * 255 + 4080 ] [ 20 * 255 + 4335 ] ) -> unknown command -> too many errors ( 61 )Scasm compilation status: aborted

----------I've simply copied the contents of SCAERROR.LOG. After that, and waiting some time, I can finally see some .bmp generated in the Tools\Work folder... and a file named "Bucaramanga1_VTPH.scm" (well, my project is named Bucaramanga, after my home city :(). What am I doing wrong?Best regards from Colombia,Luis Miguel

[Guest luissa]

Hello Luis,Please check the version number of SCASM! You should get the latest available here: www.scasm.deRegards,Luis

[Luis Hernandez 569]

Please check the version number of SCASM! You should get the latest available here: www.scasm.de

Indeed, I had a prehistoric version of SCASM. With the latest version I was able to solve that problem. Then I sent the BGL to Addon Scenery\scenery and the textures to Flight Simulator 9\Texture (after getting CTDs at 43% and reading some forums). Wow, it looks great, specially when I was able to lay over a set of roads I've previously done (I couldn't get that with Maps2BGL or Terrabuilder). Now to get a cloudless aerial photo. Is it possible to lay autogen using SBuilder?Ah, a suggestion: is it possible to, in a future update, allow having the textures in the same folder that the BGL? I mean, I have a folder named Escenario with the 2 subfolders: Scenery with all the BGLs, and Texture, with the required textures (instead of sending them to the main Texture folder).Thanks a lotBest regards from Colombia,Luis Miguel