Pls help me.. 8800GTS 512MB

[Sebi_EDDT 1]

Hello,Please help me about problem Driver nv4_disp.dll > Bluescreen! I am not sure understand!I test been two time...! Change DDR2 RAM (Corsair 2GB to OCZ 2GB)..! Memtest84 work fine (over 3 hours!) OkayI test been two Time! Change other graphic card.(BFG 8800GTS OC 512MB to ASUS 8800GTS 512MB).! Test been other "World of Subways Berlin Vol.2"Update all Drive.. Intel as ...! see my SysProfil But, i install MSFS 2004 to harddisk, with update 9.1! Test.. work fine! Than install Add On Imagsime KCLT, start.. porcenz 100%, than Stop: nv4_disp.dll Bluescreen! How....? I been install clear..!Sebastian

[Bert Pieke 7,584]

Hello,Please help me about problem Driver nv4_disp.dll > Bluescreen! I am not sure understand!I test been two time...! Change DDR2 RAM (Corsair 2GB to OCZ 2GB)..! Memtest84 work fine (over 3 hours!) OkayI test been two Time! Change other graphic card.(BFG 8800GTS OC 512MB to ASUS 8800GTS 512MB).! Test been other "World of Subways Berlin Vol.2"Update all Drive.. Intel as ...! see my SysProfil But, i install MSFS 2004 to harddisk, with update 9.1! Test.. work fine! Than install Add On Imagsime KCLT, start.. porcenz 100%, than Stop: nv4_disp.dll Bluescreen! How....? I been install clear..!Sebastian

If I understand correctly, FS9 runs OK all by itself. Only the KCLT addon causes the blue screen.If this is indeed the case, I would run FS9 without the addon for a couple of days to make sure FS9 is stable.Then, and only then, re-install KCLT and test again.

[Sebi_EDDT 1]

If I understand correctly, FS9 runs OK all by itself. Only the KCLT addon causes the blue screen.If this is indeed the case, I would run FS9 without the addon for a couple of days to make sure FS9 is stable.Then, and only then, re-install KCLT and test again.

I understand, but why..! I can

[Bert Pieke 7,584]

I understand, but why..! I can

[Illegitimi non carborundum 4]

Hi SebastianHere are a couple of references to you error message which may help you: http://byronmiller.typepad.com/byronmiller...d_windows_.html. It could be an nVidia driver issues and removing the driver and reinstalling it may help.Other references: http://forums.nvidia.com/lofiversion/index.php?t31321.html; http://www.pcreview.co.uk/forums/thread-510317.php.Like Bert said this will be a slow painstaking process, but it does sound like a driver issue. Can you go back to a driver that you know worked?RegardsPeterH

[Sebi_EDDT 1]

Hi SebastianHere are a couple of references to you error message which may help you: http://byronmiller.typepad.com/byronmiller...d_windows_.html. It could be an nVidia driver issues and removing the driver and reinstalling it may help.Other references: http://forums.nvidia.com/lofiversion/index.php?t31321.html; http://www.pcreview.co.uk/forums/thread-510317.php.Like Bert said this will be a slow painstaking process, but it does sound like a driver issue. Can you go back to a driver that you know worked?RegardsPeterH

Thanks..! I will try this links! Let me know, to Safe Mode (F8), whiche coice two > Adminatore or my use Id?Sebi

[Illegitimi non carborundum 4]

SebastianI remove the nVidia driver using add/remove programs (in Vista - Programs).Boot to safe mode and remove the remanants of any nvidia (DISPLAY only) drivers with something like drivercleaner pro (from guru3d).Run CC Cleaner or similar to remove any odd registry items.Reboot and log on as administrator. (I also disable UAC and Windows Defender at this point)Reinstall the driver.Reboot and its usually good to go.RegardsPeterH

[Sebi_EDDT 1]

SebastianI remove the nVidia driver using add/remove programs (in Vista - Programs).Boot to safe mode and remove the remanants of any nvidia (DISPLAY only) drivers with something like drivercleaner pro (from guru3d).Run CC Cleaner or similar to remove any odd registry items.Reboot and log on as administrator. (I also disable UAC and Windows Defender at this point)Reinstall the driver.Reboot and its usually good to go.RegardsPeterH

Hello, again!Well, i install been clean news nvidia (182.08)driver! So, i feel not sure, what should to setting about Nvidia Control Panel or nHancer?Open nHancer, closed Nvidia Control Panel? OrBetter now Nvidia Control Panel than nHancer?What mean..?Sebastian

[Illegitimi non carborundum 4]

SebastianIf you use nHancer you don't need to set anything in the nvidia control panel. Just make all the settings in nHancer. Links to set nhancer: http://www.simviation.com/cgi-bin/yabb2/Ya...num=1230997707; http://www.simviation.com/cgi-bin/yabb2/Ya...1208959973/4#4; http://www.simviation.com/cgi-bin/yabb2/Ya...=1208959973/6#6 http://www.simviation.com/cgi-bin/yabb2/Ya...num=1209011474; http://forums.simflight.com/viewtopic.php?...47&start=60 and on the simforums.Once set in nHancer you will get the same settings each time you open Windows and FSX.RegardsPeterH

[Sebi_EDDT 1]

SebastianIf you use nHancer you don't need to set anything in the nvidia control panel. Just make all the settings in nHancer. Links to set nhancer: http://www.simviation.com/cgi-bin/yabb2/Ya...num=1230997707; http://www.simviation.com/cgi-bin/yabb2/Ya...1208959973/4#4; http://www.simviation.com/cgi-bin/yabb2/Ya...=1208959973/6#6 http://www.simviation.com/cgi-bin/yabb2/Ya...num=1209011474; http://forums.simflight.com/viewtopic.php?...47&start=60 and on the simforums.Once set in nHancer you will get the same settings each time you open Windows and FSX.RegardsPeterH

Oh, Thanks! No for FSX because FS9 (WinXP Home SP3).I found a links of FS9 Setting nHancer! Fine..Start FS2004 to default Seattle KSEA at Runways! Good work!Start FS2004 to default Seattle KSEA at Gate, good work!Start FS2004 to Imagine Sim Add On KCLT at Runways (RWY36) and drive to Gate, good work!Start FS2004 to Imagine Sim Add On KCLT at Gate A8, bad bluescreen Stop: nv4_disp.dll>Stop: 0x00000008E (0xC0000005, 0xBF17DEED, 0xB630FA58, 0x00000000)>nv4_disp.dll - Adress BF17DEED base at BF019000, DataStamp 499c9aa2So, it was bad for me as news PC! :( :( Not understand!Sebastian

[Illegitimi non carborundum 4]

SebastianIs this "fault" only happening at KCLT (Imagine Sim) or other airports including those by Imagine Sim. Is it worth contacting Imagine Sim to see if they have a fix?Does it happen with both of your 880GTS cards?RegardsPeterH

[Sebi_EDDT 1]

SebastianIs this "fault" only happening at KCLT (Imagine Sim) or other airports including those by Imagine Sim. Is it worth contacting Imagine Sim to see if they have a fix?Does it happen with both of your 880GTS cards?RegardsPeterH

Hello Peter!I write been to Support ImagineSim, But it write:Jem write:

Hi Sebastian,Thanks for yours email.The most probable cause is a bad location on one of you PC or GFX RAM modules, or secondly a manufacturing fault somewhere on the GFX card. When these faulty areas are loaded with information it often causes the grash to desktop. The reason it happems with some airports and not others is because our airports are often far more detailed and so requite more RAM resources. Our airports run smoothly on thousands of computers so it

[Illegitimi non carborundum 4]

SebastianHave you tried another card even an older card like a 7900 would be OK?RegardsPeterH