May 5, 200917 yr My current system is struggling with system memory and needs upgrading. I have an:ASUS M/board with an AMD Athlon 64 3500+ CPU,2.21 GHz 2GBs RAMA BFG GTX260 GPU2 SATA Hard drives. 80Gbs C drive and D drive 160GbsTAGAN TG700-BZ PSU. I am looking to change the m/board and CPU, the problem is I have over 26Gbs of FS9 on my current C dive. Is there an easy way of moving this onto a new larger C drive that I will purchase with the upgrade? I thought I could just add the existing drives to the new m/board etc and crack on, but apparently not as WinXP would be unstable. Any advice would be much appreciated. Dave Boreham
May 5, 200917 yr My current system is struggling with system memory and needs upgrading. I have an:ASUS M/board with an AMD Athlon 64 3500+ CPU,2.21 GHz 2GBs RAMA BFG GTX260 GPU2 SATA Hard drives. 80Gbs C drive and D drive 160GbsTAGAN TG700-BZ PSU. I am looking to change the m/board and CPU, the problem is I have over 26Gbs of FS9 on my current C dive. Is there an easy way of moving this onto a new larger C drive that I will purchase with the upgrade? I thought I could just add the existing drives to the new m/board etc and crack on, but apparently not as WinXP would be unstable. Any advice would be much appreciated.I've found that the best way is to install FS9 from scratch on the new drive, and then copy the old drive's contents over the newly-installed version. That lets the installer make all the needed registry entries. You will need to reinstall a bunch of your add-ons anyway...anything from Flight1, PMDG, Cloud9, FSDreamTeam etc...most of the copy protection schemes also need their installers to make registry entries and/or write key files on the new drive. It's an event like this that makes a guy appreciate the Flight1 wrapper.As far as the physical transfer of the files, I use either another networked PC or an external drive (a 1 TB WD MyBook I use for monthly backups) and move the files there for transfer. RegardsBob ScottColonel, USAF (ret)ATP IMEL Gulfstream II-III-IV-VColorado Springs, CO Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 5, 200917 yr My current system is struggling with system memory and needs upgrading. I have an:ASUS M/board with an AMD Athlon 64 3500+ CPU,2.21 GHz 2GBs RAMA BFG GTX260 GPU2 SATA Hard drives. 80Gbs C drive and D drive 160GbsTAGAN TG700-BZ PSU. I am looking to change the m/board and CPU, the problem is I have over 26Gbs of FS9 on my current C dive. Is there an easy way of moving this onto a new larger C drive that I will purchase with the upgrade? I thought I could just add the existing drives to the new m/board etc and crack on, but apparently not as WinXP would be unstable. Any advice would be much appreciated.You could clone the 'c' drive to another empty drive.http://www.terabyteunlimited.com/copywipe.phpIn some cases an add-on might have to be re-installed. Some software records the disk serial number.
May 5, 200917 yr More often than not, trying to copy the whole FS9 over creates more problems and results in a longer process than if you just wiped and reinstalled from scratch - and I think reinstalling is the best option.Make a copy of your fs9 before you start though so you can cherry pick back in all your liveries and sounds etc. Regards, Max (YSSY) i7-12700K | Corsair Vengeance LPX 64GB 3600MHz DDR4 | Gigabyte RTX4090 24Gb | Gigabyte Z690 AORUS ELITE DDR4 | Corsair HX1200 PSU
May 5, 200917 yr Agreed....it will save you a lot of time, effort, and FS performance in the long run to simply reinstall FS9 on the new drive; then reinstall each of the add-ons one at a time. Tedious, I know. But it will save you work and fiddling in the long run. If you decide to clone, remember that the registry gets cloned too...that means all of the registry bloat/malware will be inherited from the old drive. Given that FS needs all the comp resources it can get, there is no substitute for a fresh OS and a fresh FS. Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
Create an account or sign in to comment