Brake problem

[Guest JNS]

Hi. I've just installed my CH USB Pro Pedals and can't seem to get the brakes to shut off. I've calibrated them several times and when looking at the "raw data" both X and Y axes are at 0, but when in the sim (FS2004) they won't go off. Using either the "." on the keyboard or the "1' button on the yoke will not turn them off. I've turned the sensitivity all the way down, no luck. Even if I rock my heels all the way back on the pedals that still won't do it. Is there something possibly wrong in the pedals causing this? BTW, the differential braking seems to work fine.Thanks,Jeff

[Rottenlungs 0]

I have these pedals and had no problems, not that that helps you much. My settings in FS are as follows:http://forums.avsim.net/user_files/67640.jpgAlso, both my brake pedal axes are reversed - (use the checkboxes on the assignments screen to do this). Settings for my pedals as follows:http://forums.avsim.net/user_files/67643.jpgHope this helps. Lungs

[Ejiro 0]

Hello, I had something similar with my CH pedals in FS 2002.The problem was not exactly the same as yours, in that placing my heels all the way back would get rid of the "brakes" message on the screen, but once I took my heels off, it would return.I finally fixed it by using the CH control manager available from the CH website. This works like a charm, not only for the rudder pedals, but for the yoke as well, where you can now customize the response over the range. Try this and see.

[Guest JNS]

Thanks, guys. The Control Manager took care of my problem.Jeff