Jump to content

Archived

This topic is now archived and is closed to further replies.

Ozark_Dogfighter

Grand Caravan & Shockwave Redux

Recommended Posts

Got Shockwave lights Redux? Got Carenado Caravan? Don't have the time to mod it? Try mine! Big%20Grin.gif[Lights]// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin//light.0 = 3, -17.48, -26.30, 3.92, fx_navredcardose//light.1 = 3, -17.75, 26.30, 3.92, fx_navgrecardose//light.2 = 3, -43.87, 0.12, 1.74, fx_navwhicardose//light.3 = 2, -17.70, -26.30, 3.92, fx_strobecardose//light.4 = 2, -17.97, 26.30, 3.92, fx_strobecardose//light.5 = 1, -41.75, 0.00, 10.45, fx_beaconcardose//light.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardose//light.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1//light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1//light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1//light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1//light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2//Shockwave Redux lights for Carenado C208B Grand Caravan HD by Ozark Dogfighterlight.0 = 3, -17.48, -26.30, 3.92, fx_shockwave_navredlight.1 = 3, -17.75, 26.30, 3.92, fx_shockwave_navgrelight.2 = 3, -43.87, 0.12, 1.74, fx_shockwave_navwhilight.3 = 2, -17.70, -26.30, 3.92, fx_shockwave_strobe_2light.4 = 2, -17.97, 26.30, 3.92, fx_shockwave_strobe_3light.5 = 1, -41.75, 0.00, 10.45, fx_shockwave_beaconhlight.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardoselight.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2light.12 = 6, -15.80, -17.55, 3.80, fx_shockwave_landing_light_smalllight.13 = 6, -15.80, 17.55, 3.80, fx_shockwave_landing_light_smalllight.14 = 5, -15.80, -17.00, 3.80, fx_shockwave_landing_lightlight.15 = 5, -15.80, 17.00, 3.80, fx_shockwave_landing_lightlight.16 = 5, -2.00, -19.00, 1.00, fx_shockwave_landing_light_light_smlight.17 = 5, -0.50, 19.00, 1.00, fx_shockwave_landing_light_light_sm


-Jeremy

The Ozark Dogfighter

Share this post


Link to post
Share on other sites
Guest 413X3

does the beacon reflect in the virtual cockpit at night or any other issues? Thanks for doing this. Will try it out.

Share this post


Link to post
Share on other sites

It seems that I can never stop that from happening very well. I did move the starboard landing light light a bit more forward than the port side, because of the radar pod. I like Carenado's VC lights on this one so I left them. The ice light on the port wing and the cabin entry lights on the undersides of the wings are built into the model and are also very nice. The landing and taxi lights are too.


-Jeremy

The Ozark Dogfighter

Share this post


Link to post
Share on other sites

Thanks Jeremy, nice mod!


Best regards,
David Roch


Intel 9900K@5.1, Asus Maximus XI Formula, 32Gb G.Skill TridentZ 4133 CL17, EVGA RTX 2080 Ti XC ULTRA GAMING, 3x SSD Samsung 970 Pro M.2, Corsair 1600W PSU & 49" 4K TV monitor@30fps.

Share this post


Link to post
Share on other sites
Not a problem David, and thanks!
Appreciate this, thanks. It's one of the more teeth gnashing jobs in FSX!

My memory's not as sharp as it used to be. Also, my memory's not as sharp as it used to be.

My Paints On MediaFire

Share this post


Link to post
Share on other sites

Hey guys,If you look in the fsx/effects folder you will see fx_shockwave_beaconb_nl.fx.the _nl version is the No Light one which means it doesnt cast light in the VC.Thanks for doing the list for the caravan.CheersTrev.

Share this post


Link to post
Share on other sites

Shockwave lights Redux is a great program and Ozark Dogfighter has done a very nice config. for the 208B. Thanks for your work.

Share this post


Link to post
Share on other sites
Got Shockwave lights Redux? Got Carenado Caravan? Don't have the time to mod it? Try mine! Big%20Grin.gif[Lights]// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin//light.0 = 3, -17.48, -26.30, 3.92, fx_navredcardose//light.1 = 3, -17.75, 26.30, 3.92, fx_navgrecardose//light.2 = 3, -43.87, 0.12, 1.74, fx_navwhicardose//light.3 = 2, -17.70, -26.30, 3.92, fx_strobecardose//light.4 = 2, -17.97, 26.30, 3.92, fx_strobecardose//light.5 = 1, -41.75, 0.00, 10.45, fx_beaconcardose//light.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardose//light.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1//light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1//light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1//light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1//light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2//Shockwave Redux lights for Carenado C208B Grand Caravan HD by Ozark Dogfighterlight.0 = 3, -17.48, -26.30, 3.92, fx_shockwave_navredlight.1 = 3, -17.75, 26.30, 3.92, fx_shockwave_navgrelight.2 = 3, -43.87, 0.12, 1.74, fx_shockwave_navwhilight.3 = 2, -17.70, -26.30, 3.92, fx_shockwave_strobe_2light.4 = 2, -17.97, 26.30, 3.92, fx_shockwave_strobe_3light.5 = 1, -41.75, 0.00, 10.45, fx_shockwave_beaconhlight.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardoselight.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2light.12 = 6, -15.80, -17.55, 3.80, fx_shockwave_landing_light_smalllight.13 = 6, -15.80, 17.55, 3.80, fx_shockwave_landing_light_smalllight.14 = 5, -15.80, -17.00, 3.80, fx_shockwave_landing_lightlight.15 = 5, -15.80, 17.00, 3.80, fx_shockwave_landing_lightlight.16 = 5, -2.00, -19.00, 1.00, fx_shockwave_landing_light_light_smlight.17 = 5, -0.50, 19.00, 1.00, fx_shockwave_landing_light_light_sm
thanks

Share this post


Link to post
Share on other sites

Hello!

 

May I ask if I'm understand right this config? Here is what I have onto Aircraft.cfg:

 

[Lights] 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin

//Types:

light.0 = 3, -17.48, -26.30, 3.92, fx_shockwave_navredlight

light.1 = 3, -17.75, 26.30, 3.92, fx_shockwave_navgrelight

light.2 = 3, -43.87, 0.12, 1.74, fx_shockwave_navwhilight

light.3 = 2, -17.70, -26.30, 3.92, fx_shockwave_strobe_2light

light.4 = 2, -17.97, 26.30, 3.92, fx_shockwave_strobe_3light

light.5 = 1, -41.75, 0.00, 10.45, fx_shockwave_beaconhlight

light.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardoselight

light.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1light

light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1light

light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1light

light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1light

light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2light

light.12 = 6, -15.80, -17.55, 3.80, fx_shockwave_landing_light_smalllight

light.13 = 6, -15.80, 17.55, 3.80, fx_shockwave_landing_light_smalllight

light.14 = 5, -15.80, -17.00, 3.80, fx_shockwave_landing_lightlight

light.15 = 5, -15.80, 17.00, 3.80, fx_shockwave_landing_lightlight

light.16 = 5, -2.00, -19.00, 1.00, fx_shockwave_landing_light_light_smlight

light.17 = 5, -0.50, 19.00, 1.00, fx_shockwave_landing_light_light_sm

 

I ask because I can see only a landing lights. Should I put some line to panel.cfg under [VirtualCockpit]?

 

Rolf


Rolf Niemi

Share this post


Link to post
Share on other sites

Hi Rolf

 

You are correct, you need to add the following to the [Vcockpit01] section of the 208’s Panel.cfg file using notepad or similar…

 

gauge12=Shockwave_Lights!SW Lights, 484,497,20,12

 

Now the gauge number should be 12 as shown, but just in case you have anything else added to the [Vcockpit01] section just make this gauge the last one and change the number to suit.

 

I hope it helps.

 

Jim Hodkinson

Share this post


Link to post
Share on other sites

Hi Jim and VeryBumpy!

 

Thank You. I tryed to add the line to the panel.cfg but the result was that only landing/taxi lights illuminate. This is my config both Aircraft and panel.cfg:

 

Aircraft.cfg:

 

...

 

[pitot_static]

vertical_speed_time_constant = 1.0

pitot_heat = 1.0

 

 

[Radios]

// Radio Type = availiable, standby frequency, has glide slope

Audio.1 = 1

Com.1 = 1, 1

Com.2 = 1, 1

Nav.1 = 1, 1, 1

Nav.2 = 1, 1, 1

Adf.1 = 1

Transponder.1 = 1

Marker.1 = 1

 

 

[Lights]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin

light.0 = 3, -17.48, -26.30, 3.92, fx_shockwave_navredlight

light.1 = 3, -17.75, 26.30, 3.92, fx_shockwave_navgrelight

light.2 = 3, -43.87, 0.12, 1.74, fx_shockwave_navwhilight

light.3 = 2, -17.70, -26.30, 3.92, fx_shockwave_strobe_2light

light.4 = 2, -17.97, 26.30, 3.92, fx_shockwave_strobe_3light

light.5 = 1, -41.75, 0.00, 10.45, fx_shockwave_beaconhlight

light.6 = 9, -11.61, 0.00, 0.98, fx_vclightcardoselight

light.7 = 10, -12.61, 0.00, 2.10, fx_vclightcardose1light

light.8 = 10, -15.61, 0.00, 2.10, fx_vclightcardose1light

light.9 = 10, -20.61, 0.00, 2.10, fx_vclightcardose1light

light.10 = 10, -25.91, 0.00, 2.10, fx_vclightcardose1light

light.11 = 10, -11.81, 0.00, 0.98, fx_vclightcardose2light

light.12 = 6, -15.80, -17.55, 3.80, fx_shockwave_landing_light_smalllight

light.13 = 6, -15.80, 17.55, 3.80, fx_shockwave_landing_light_smalllight

light.14 = 5, -15.80, -17.00, 3.80, fx_shockwave_landing_lightlight

light.15 = 5, -15.80, 17.00, 3.80, fx_shockwave_landing_lightlight

light.16 = 5, -2.00, -19.00, 1.00, fx_shockwave_landing_light_light_smlight

light.17 = 5, -0.50, 19.00, 1.00, fx_shockwave_landing_light_light_sm

 

 

panel.cfg:

 

...

 

//--------------------------------------------------------

[Window04]

file=info.bmp

size_mm=555,139

window_size_ratio=1.000

position=0

visible=1

ident=142

window_size= 0.290, 0.097

window_pos= 0.350, 0.020

 

 

 

//--------------------------------------------------------

[Vcockpit01]

Background_color=0,0,0

size_mm=512,512

visible=0

pixel_size=1024,1024

texture=$Panel_CARAV_1

 

gauge00=GCCB!Airspeed, 2,4,164,164

gauge01=GCCB!Attitude, 170,4,164,164

gauge02=GCCB!Altimeter, 341,3,164,164

gauge03=GCCB!rmi, 1,174,165,165

gauge04=GCCB!Horizontal Situation Indicator, 169,173,168,168

gauge05=GCCB!Vertical_speed, 340,173,167,167

gauge06=GCCB!vor2, 1,343,164,164

gauge07=GCCB!Turn_Coordinator, 169,343,162,166

gauge08=GCCB!DME_screen, 333,351,176,68

gauge09=GCCB!Panel_annunciator, 333,428,175,65

gauge10=Shockwave_Lights!SW Lights, 484,497,20,12

 

If You need some picture before / after I'll take them. This is very odd and this is a first time as I have problem like this with Shockwave Lights. As default config the lights work very well. I have REX and AS2012 but I don't use their lights - they are unticket...

 

Rolf


Rolf Niemi

Share this post


Link to post
Share on other sites

gaugeXX=shockwave_lights!SW Lights, 1,1,1,1

 

is what you should use. Not sure where your non 1,1,1,1 value came from.

 

More info.

Share this post


Link to post
Share on other sites

×
×
  • Create New...