Jump to content

Archived

This topic is now archived and is closed to further replies.

mdexter

Shockwave 3D Redux - Wheel and Side of Aircraft Lights - PLEASE HELP - STUMPED!

Recommended Posts

Hi All,Ok I have two pictures attached:One is the 737 will all lights on, the one with the red arrow pointing to the lights on either side of the Aircraft at the front (shows part of the livery).Second is the Landing Gear has come up and the wheel light switched off (Yellow arrow shows the lights on the side of the aircraft have also dissapeared)OK PROBLEM: Wanted to keep the aircraft side lights on to show the liveries etc on th aircraft, just want the wheel light to turn off, ok I have the lights config below in aircraft.cfg and the panel.cfg entries.I have made all the lights I want to stay on = 6 and the wheel light to turn off I made = 5WHATS HAPPENING GUYS - Why does the side lights with the red arrow, why do they also turn off when the wheel light goes off (yellow arrow shows the lights off where the red arrow is) ?????AIRCRAFT.CFGlight.0 = 3, -14.02, -56.65, 4.08, fx_shockwave_navred_nl ,light.1 = 3, -14.02, 56.65, 4.08, fx_shockwave_navgre_nl ,light.2 = 2, -15.22, -57.08, 4.08, fx_shockwave_strobe_nl_3 ,light.3 = 2, -15.22, 57.08, 4.08, fx_shockwave_strobe_nl_3 ,light.4 = 2, 1.60, 0.00, -4.75, fx_shockwave_beacon_fastflash ,light.5 = 1, 8.21, 0.00, 9.30, fx_shockwave_beacon_fastflash_lowl ,light.6 = 3, -62.80, 0.00, 6.82, fx_shockwave_recog_flash_r ,light.7 = 3, -62.80, 0.00, 6.82, fx_shockwave_navwhi_nl ,light.8 = 3, -19.12, -57.71, 3.88, fx_shockwave_recog_flash_r ,light.9 = 3, -19.12, 57.71, 3.88, fx_shockwave_recog_flash_g ,light.10 = 6, 13.12, -2.31, -4.38, fx_Shockwave_landing_light ,light.11 = 6, 13.12, 2.31, -4.38, fx_Shockwave_landing_light ,light.12 = 6, 13.62, -7.18, -0.38, fx_Shockwave_landing_light_narrow ,light.13 = 6, 13.62, 7.18, -0.38, fx_Shockwave_landing_light_narrow ,light.14 = 5, 51.500, 0, -6.00, fx_Shockwave_landing_light_narrow,light.15 = 4, 55.2 , 0, 5.25, fx_shockwave_vclight,light.16 = 6, -6.50, -32.60, -0.10, fx_shockwave_landing_light_narrow_down_45 ,light.17 = 6, -6.50, 32.60, -0.10, fx_shockwave_landing_light_narrow_down_45PANEL.CFGgauge05=shockwave_lights!SW Lights, 1,1,1,1 //shockwave lightgauge06=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave lightPLEASE HELP ANYONE !!!!Many thanks in advance......

Share this post


Link to post
Share on other sites

×
×
  • Create New...