autobrakes issue

[GRO 0]

Hi everyone Please advice on the following issue during landing (with auto brake 2/3):

1. After touchdown and 80 knots reached I release reverse and try to use manual brake;
2. Having 30 knots I stop braking and give some power to keep it and ensure taxiing (autobrake turned off by me!);
3. But regardless of that the plane proceeds with slowing down till complete stop;
4. And thereafter I can’t use manual brake and have to apply parking brake during taxi up to the gate.

I took notice of that only a few times but I’d like to understand why it happens from time to time. What do I wrong? Sorry if the issue has been brought already somewhere, I didn’t find. Thank you. ps carbon brakes engaged

[GRO 0]

no one has ideas why brakes doesn't work after touchdown? please

[S.Keller 14]

same problems, no fix by pmdg..so far

[GRO 0]

Have they confirmed this bug?

[RickButler 0]

Try lowering the spoilers instead to turn off the autobrake? That is what I do, and have no problems that way.

[GRO 0]

Try lowering the spoilers instead to turn off the autobrake? That is what I do, and have no problems that way.

I will do. Thx

[masneoquil 66]

I always double tap the brakes to disengage the autobrakes. And set autobrake off as part of the after landing flow, when i'm vacating the runway. Never had a problem.

[VLJ510 16]

I always double tap the brakes to disengage the autobrakes. And set autobrake off as part of the after landing flow, when i'm vacating the runway. Never had a problem.

+1, works for me as well!

[GRO 0]

So what is my mistake? I shouldn't hold the brakes after reverse release? I just need to tap it twice instead, right?

[audiohavoc 24]

If you read the introduction, it says you must doubletap the brakes (must exceed the force being applied by the autobrakes) to disengage them.

[GRO 0]

If you read the introduction, it says you must doubletap the brakes (must exceed the force being applied by the autobrakes) to disengage them.

clear, thanks! I'll check Intro again ...

[davidz 26]

Make sure that you get an amber AUTOBRAKE DISARM light when you disengage the autobrakes (unless you do this by turning the switch to OFF).