Jump to content

Archived

This topic is now archived and is closed to further replies.

ubersu

FSDT KLAX for FSX Released

Recommended Posts

Hi, Already downloading.... SWEET


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post
Share on other sites

Getting my copy now. I've been anticipating this release for some time. Along with the NGX this is a plus. I wonder how far along KPHX from Flightbeam and KSAN from ceilosim are?

Share this post


Link to post
Share on other sites
Hi, Already downloading.... SWEET
Hey, Mike A quick look after installation shows that it is beautiful! I'll probably spend most of the weekend flying in and out between testing sessions... DJ

Share this post


Link to post
Share on other sites

Just bought it. Will install and try tomorrow. Gonna fly the PMDG 737NGX over to KLAS and back.


Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.8GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
Share on other sites
Its not bad. Runs very well. All the shinny HD is overrated.Ground textures are very horrible colours. Looks better at night. Far from Orbx or Flytampa quality but its not a farm & BAW fly there :)
I couldn't disagree more - you must not have gotten the same airport I did. I've got all the FlyTampa airports and this is as good or better than anything George has ever done. Colors are a matter of opinion (the real LAX area is no beauty) , but the level of detail is astonishing. DJ

Share this post


Link to post
Share on other sites

Agh! Don't believe this.... Just when I decide I spending FARRRRRRR too much money on addons this month, out comes this baby. Boy, am I gonna be in troubleShocked.gifPlease don't tellLoser.gif


Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)

Share this post


Link to post
Share on other sites

Well Thruster I really have to disagree with you on that one, but what your saying sounds harsh considering all the work the team has put into it, I think its a fantastic airport but oh well you can please everyone in this world just flew for only a few minutes since I have been and out of the house the past few hours Phil you are gonna go broke man! lol


Cesar Martinez

Share this post


Link to post
Share on other sites

I agree with u. ive bought all the products until PHNL Honolulu but the new technic i dont like it because the textures look not natural, look like a cartoon. lets try los angeles and see. i cross my fingers

Its not bad. Runs very well. All the shinny HD is overrated.Ground textures are very horrible colours. Looks better at night. Far from Orbx or Flytampa quality but its not a farm & BAW fly there :)

Share this post


Link to post
Share on other sites

ARGH Thought I'd install and try anyway. Getting a CTD at 90% loading. Always. Tried the default flight - no problem. Tried FSDT KLAS - no problem. KLAX is CTD-ing on me without end, and the culprit is always ntdll.dll. I'm gussing the scenery is too heavy for my computer too handle or something, even though all other FSDT airports do not CTD on me. I'll start disabling entries in the scenery library, see if there's something here that causes problems. EDIT: Right, turned off all sceneries I have for that area, except stuff like UTX< and find the sim crashing at 100%... So it seems KLAX is not the problem here. *sigh* It's such a pity that I always have to troubleshoot this sim before I can do anything with it...


Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.8GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
Share on other sites
ARGH Thought I'd install and try anyway. Getting a CTD at 90% loading. Always. Tried the default flight - no problem. Tried FSDT KLAS - no problem. KLAX is CTD-ing on me without end, and the culprit is always ntdll.dll. I'm gussing the scenery is too heavy for my computer too handle or something, even though all other FSDT airports do not CTD on me. I'll start disabling entries in the scenery library, see if there's something here that causes problems. EDIT: Right, turned off all sceneries I have for that area, except stuff like UTX< and find the sim crashing at 100%... So it seems KLAX is not the problem here. *sigh* It's such a pity that I always have to troubleshoot this sim before I can do anything with it...
Do you have multiple KLAX AFCADs installed?

Ryan Maziarz
devteam.jpg

For fastest support, please submit a ticket at http://support.precisionmanuals.com

Share this post


Link to post
Share on other sites
ARGH Thought I'd install and try anyway. Getting a CTD at 90% loading. Always. Tried the default flight - no problem. Tried FSDT KLAS - no problem. KLAX is CTD-ing on me without end, and the culprit is always ntdll.dll. I'm gussing the scenery is too heavy for my computer too handle or something, even though all other FSDT airports do not CTD on me. I'll start disabling entries in the scenery library, see if there's something here that causes problems. EDIT: Right, turned off all sceneries I have for that area, except stuff like UTX< and find the sim crashing at 100%... So it seems KLAX is not the problem here. *sigh* It's such a pity that I always have to troubleshoot this sim before I can do anything with it...
Benjamin did you try to disable ai traffic or do you have it on? it could be also what Ryan mentioned multiple KLAX AFCADs files.

Cesar Martinez

Share this post


Link to post
Share on other sites
i dont like it because the textures look not natural, look like a cartoon.
Anyone else find this reference to "cartoon" being one of the most overused comparisons? Time to come up with some new similes guys. This is a cartoon: original.jpg

- Aaron

Share this post


Link to post
Share on other sites
Benjamin did you try to disable ai traffic or do you have it on? it could be also what Ryan mentioned multiple KLAX AFCADs files.
I suspect it's the AI traffic indeed. I let FSX rebuild the fsx.cfg, and it all works now (although FPS are rather horrid). However, the MTX entry is also not present - yet. I'll add it and see what happens. There are no duplicate AFCADs. EDIT: Added in the AI, and bam, CTD at 100% loading. No idea why, it works at all other places. Somebody have a clue?

Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.8GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...