Jump to content
Sign in to follow this  
Mike_CFII_MEL

PMDG_737NGX.DLL Crash

Recommended Posts

Mike,"I just installed the Level-D 767 and it works fine, no problem whats-so-ever."So, system wise you are OK. Guess you will have to wait for your ticket response ...........Possibly SP1 will do the trick (when released) but, we do not know what is included (fixes).


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Hi, I have a PFC column yoke, a VRAC Boeing Throttle Quad and Revolution rudder pedals. I've also disconnected all external hardware and rebooted the system, I get the same PMDG_737NGX.DLL error/CTD.


Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

       Four-Intel I9/10900K | One-AMD-7950X3D | Three-Asus TUF 4090s | One-3090 | One-1080TI | Five-64GB DDR5 RAM 6000mhz | Five-Cosair 1300 P/S | Five-Pro900 2TB NVME        One-Eugenius ECS2512 / 2.5 GHz Switch | Five-Ice Giant Elite CPU Coolers | Three-75" 4K UHDTVs | One-24" 1080P Monitor | One-19" 1080P Monitor | One-Boeing 737NG Flight Deck

Share this post


Link to post
Share on other sites

Mike.I would try:Backup uiautomationcore.dll somewhere like a cd.Delete it from your drive.Reboot PC.Test once without it.


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Hi, Both (system32 and syswow64) uiautomationcore.dll renamed to .BAK rebooted and I get the same PMDG problem "PMDG_737NGX.DLL" ERROR/CTD.


Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

       Four-Intel I9/10900K | One-AMD-7950X3D | Three-Asus TUF 4090s | One-3090 | One-1080TI | Five-64GB DDR5 RAM 6000mhz | Five-Cosair 1300 P/S | Five-Pro900 2TB NVME        One-Eugenius ECS2512 / 2.5 GHz Switch | Five-Ice Giant Elite CPU Coolers | Three-75" 4K UHDTVs | One-24" 1080P Monitor | One-19" 1080P Monitor | One-Boeing 737NG Flight Deck

Share this post


Link to post
Share on other sites

Darn ... back to the drawing board (tech notes). Also, you did not have one (uiautomationcore.dll) in the FSX folder .. just double checking?


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Out of left field and a shot in the dark try the following. 1) If you have another PMDG Plane such as the MD-11 or 747-400 try loading that first and then switching to the NGX at the gate. 2) Take one of your GTX 480 cards out of your computer and disconnect the (triplehead2go? 3 monitor setup?). Connect the GTX480 to a single monitor only at 1920x1200 resolution or less.

Share this post


Link to post
Share on other sites

Hi Mike I just got the 737ngx a couple days ago. I also got a crash to desktop when loading three out of four house colors. After down loading a few livieries I wanted to run one of the other three aircraft. CTD time and time over. This is an FSX problem in my opinion. So I ran a cessna default for a few seconds ,changed views, and then ended my flight , then started any of the house paints no problem . FSX must save some settings from the last flight. Hope this helps. Bob Savo

Share this post


Link to post
Share on other sites

have you checked for double (duplets)737NGX module entrys in your fsx.cfg ? Should not be there /Michael


Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post
Share on other sites

Hi Everyone, Ryan has taken control of my system and has tried (various options) to fix the problem, so far PMDG doesn't work. Both Ryan and I got the same error (PMDG_737NGX.DLL) message when trying to load the PMDG 737-NGX. He is going to talk to someone else on the PMDG team and get back to me, we'll give it another try hopefully later tonight.


Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

       Four-Intel I9/10900K | One-AMD-7950X3D | Three-Asus TUF 4090s | One-3090 | One-1080TI | Five-64GB DDR5 RAM 6000mhz | Five-Cosair 1300 P/S | Five-Pro900 2TB NVME        One-Eugenius ECS2512 / 2.5 GHz Switch | Five-Ice Giant Elite CPU Coolers | Three-75" 4K UHDTVs | One-24" 1080P Monitor | One-19" 1080P Monitor | One-Boeing 737NG Flight Deck

Share this post


Link to post
Share on other sites

Mike,"Ryan has taken control of my system"That will surely help!Good luck guys.


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Hello Mike;Where did you get your UIAutomationCore.dll from,I have the same type of computer system,and Fsx installed on the D-drive,in a folder by itself.The UIAutomationCore.dll I use,I found in the System 32 folder,its the latest version.I have had no problems out of any add-ons.The only thing I did,was to run all Fsx,and related programs as administrator.Mark

Share this post


Link to post
Share on other sites
Hello Mike;Where did you get your UIAutomationCore.dll from,I have the same type of computer system,and Fsx installed on the D-drive,in a folder by itself.The UIAutomationCore.dll I use,I found in the System 32 folder,its the latest version.I have had no problems out of any add-ons.The only thing I did,was to run all Fsx,and related programs as administrator.Mark
I am getting the same issue. Although it only happens when I hit SHIFT E to open the doors.Windows 7 64bit6GBNVidia GTX 470A few questions though:In my System32 folder there are 2 UIAnimation files: UIAnimation.dll & UIAnimationCore.dll.Do I need both of them? If not, which one do I delete?Also, where can I obtain the latest UIAnimationCore.dll since mine is dated: 7/13/2009Thanks!Mark Edited by Maniac59

Mark Harris

ESA1178

Senior Captain

http://www.eurostar-aviation.ch/

Share this post


Link to post
Share on other sites
I am getting the same issue. Although it only happens when I hit SHIFT E to open the doors.Windows 7 64bit6GBNVidia GTX 470A few questions though:In my System32 folder there are 2 UIAnimation files: UIAnimation.dll & UIAnimationCore.dll.Do I need both of them? If not, which one do I delete?Also, where can I obtain the latest UIAnimationCore.dll since mine is dated: 7/13/2009Thanks!Mark
Are you mixing things ? its UIautomationcore.dll that should be deleted from win7. /Michael

Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...