Jump to content

Archived

This topic is now archived and is closed to further replies.

Mr.midnight

fsuipc 4.70

Recommended Posts

well folks i know there is a site for this topic , and i refuse to go to the fsuipc site to be told to read the frickin manual.i have a problem with widefs , it worked great and then all of a sudden it cannot find the server, did all that is asked in the manual .servername or server address, even reloaded , the whole nine yards .same workgroup etc. what am i missing.im not for sure about ports and how to see who is using them , or change them if need be****** WideClient Log [version 6.86] Class=FS98MAIN *********Date (dmy): 09/01/12, Time 21:15:21.558: Client name is CAMTECH1234 LUA: "C:\Users\Robert C\Desktop\widefs\Initial.LUA": not found234 Attempting to connect now249 Trying TCP/IP host "THERMALTAKE" port 8002 ...249 ... Okay, IP Address = 192.168.1.21294 Error on client pre-Connection Select() [Error=10061] Connection refused1294 Ready to try connection again2324 Attempting to connect now62041 Trying TCP/IP host "THERMALTAKE" port 8002 ...62041 ... Okay, IP Address = 192.168.1.2123818 Trying TCP/IP host "THERMALTAKE" port 8002 ...123818 ... Okay, IP Address = 192.168.1.2185594 Trying TCP/IP host "THERMALTAKE" port 8002 ...185594 ... Okay, IP Address = 192.168.1.2247370 Trying TCP/IP host "THERMALTAKE" port 8002 ...247370 ... Okay, IP Address = 192.168.1.2309147 Trying TCP/IP host "THERMALTAKE" port 8002 ...309147 ... Okay, IP Address = 192.168.1.2370923 Trying TCP/IP host "THERMALTAKE" port 8002 ...370923 ... Okay, IP Address = 192.168.1.2432684 Trying TCP/IP host "THERMALTAKE" port 8002 ...432684 ... Okay, IP Address = 192.168.1.2494460 Trying TCP/IP host "THERMALTAKE" port 8002 ...494460 ... Okay, IP Address = 192.168.1.2568592 Error on client pre-Connection Select() [Error=10060] Connection timed out568592 Ready to try connection again569653 Attempting to connect now572258 Trying TCP/IP host "THERMALTAKE" port 8002 ...572258 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type614550 Error on client pre-Connection Select() [Error=10061] Connection refused614550 Ready to try connection again615580 Attempting to connect now629994 Trying TCP/IP host "THERMALTAKE" port 8002 ...629994 ... Okay, IP Address = 192.168.1.2691770 Trying TCP/IP host "THERMALTAKE" port 8002 ...691770 ... Okay, IP Address = 192.168.1.2753547 Trying TCP/IP host "THERMALTAKE" port 8002 ...753547 ... Okay, IP Address = 192.168.1.2815323 Trying TCP/IP host "THERMALTAKE" port 8002 ...815323 ... Okay, IP Address = 192.168.1.2877100 Trying TCP/IP host "THERMALTAKE" port 8002 ...877100 ... Okay, IP Address = 192.168.1.2938876 Trying TCP/IP host "THERMALTAKE" port 8002 ...938876 ... Okay, IP Address = 192.168.1.21000652 Trying TCP/IP host "THERMALTAKE" port 8002 ...1000652 ... Okay, IP Address = 192.168.1.21062413 Trying TCP/IP host "THERMALTAKE" port 8002 ...1062413 ... Okay, IP Address = 192.168.1.21124190 Trying TCP/IP host "THERMALTAKE" port 8002 ...1124190 ... Okay, IP Address = 192.168.1.21141350 Error on client pre-Connection Select() [Error=10060] Connection timed out1141350 Ready to try connection again1142411 Attempting to connect now1191239 Error on client pre-Connection Select() [Error=10061] Connection refused1191239 Ready to try connection again1192268 Attempting to connect now1192268 Trying TCP/IP host "THERMALTAKE" port 8002 ...1192268 ... Okay, IP Address = 192.168.1.21254045 Trying TCP/IP host "THERMALTAKE" port 8002 ...1254045 ... Okay, IP Address = 192.168.1.21315790 Trying TCP/IP host "THERMALTAKE" port 8002 ...1315790 ... Okay, IP Address = 192.168.1.21377566 Trying TCP/IP host "THERMALTAKE" port 8002 ...1377566 ... Okay, IP Address = 192.168.1.21439343 Trying TCP/IP host "THERMALTAKE" port 8002 ...1439343 ... Okay, IP Address = 192.168.1.21501119 Trying TCP/IP host "THERMALTAKE" port 8002 ...1501119 ... Okay, IP Address = 192.168.1.21562896 Trying TCP/IP host "THERMALTAKE" port 8002 ...1562896 ... Okay, IP Address = 192.168.1.21624672 Trying TCP/IP host "THERMALTAKE" port 8002 ...1624672 ... Okay, IP Address = 192.168.1.21686448 Trying TCP/IP host "THERMALTAKE" port 8002 ...1686448 ... Okay, IP Address = 192.168.1.21748225 Trying TCP/IP host "THERMALTAKE" port 8002 ...1748225 ... Okay, IP Address = 192.168.1.21810001 Trying TCP/IP host "THERMALTAKE" port 8002 ...1810001 ... Okay, IP Address = 192.168.1.21871778 Trying TCP/IP host "THERMALTAKE" port 8002 ...1871778 ... Okay, IP Address = 192.168.1.21933554 Trying TCP/IP host "THERMALTAKE" port 8002 ...1933554 ... Okay, IP Address = 192.168.1.21995330 Trying TCP/IP host "THERMALTAKE" port 8002 ...1995330 ... Okay, IP Address = 192.168.1.22057107 Trying TCP/IP host "THERMALTAKE" port 8002 ...2057107 ... Okay, IP Address = 192.168.1.22118883 Trying TCP/IP host "THERMALTAKE" port 8002 ...2118883 ... Okay, IP Address = 192.168.1.22180660 Trying TCP/IP host "THERMALTAKE" port 8002 ...2180660 ... Okay, IP Address = 192.168.1.22244495 Error on client pre-Connection Select() [Error=10060] Connection timed out2244495 Ready to try connection again2245556 Attempting to connect now2248161 Trying TCP/IP host "THERMALTAKE" port 8002 ...2248161 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type2282450 Error on client pre-Connection Select() [Error=10061] Connection refused2282450 Ready to try connection again2283495 Attempting to connect now2305710 Trying TCP/IP host "THERMALTAKE" port 8002 ...2305710 ... Okay, IP Address = 192.168.1.22367486 Trying TCP/IP host "THERMALTAKE" port 8002 ...2367486 ... Okay, IP Address = 192.168.1.22429263 Trying TCP/IP host "THERMALTAKE" port 8002 ...2429263 ... Okay, IP Address = 192.168.1.22491039 Trying TCP/IP host "THERMALTAKE" port 8002 ...2491039 ... Okay, IP Address = 192.168.1.22552816 Trying TCP/IP host "THERMALTAKE" port 8002 ...2552816 ... Okay, IP Address = 192.168.1.22614592 Trying TCP/IP host "THERMALTAKE" port 8002 ...2614592 ... Okay, IP Address = 192.168.1.22676368 Trying TCP/IP host "THERMALTAKE" port 8002 ...2676368 ... Okay, IP Address = 192.168.1.22738145 Trying TCP/IP host "THERMALTAKE" port 8002 ...2738145 ... Okay, IP Address = 192.168.1.22799921 Trying TCP/IP host "THERMALTAKE" port 8002 ...2799921 ... Okay, IP Address = 192.168.1.22861698 Trying TCP/IP host "THERMALTAKE" port 8002 ...2861698 ... Okay, IP Address = 192.168.1.22923474 Trying TCP/IP host "THERMALTAKE" port 8002 ...2923474 ... Okay, IP Address = 192.168.1.22985250 Trying TCP/IP host "THERMALTAKE" port 8002 ...2985250 ... Okay, IP Address = 192.168.1.23047027 Trying TCP/IP host "THERMALTAKE" port 8002 ...3047027 ... Okay, IP Address = 192.168.1.23108803 Trying TCP/IP host "THERMALTAKE" port 8002 ...3108803 ... Okay, IP Address = 192.168.1.23170580 Trying TCP/IP host "THERMALTAKE" port 8002 ...3170580 ... Okay, IP Address = 192.168.1.23232356 Trying TCP/IP host "THERMALTAKE" port 8002 ...3232356 ... Okay, IP Address = 192.168.1.23294132 Trying TCP/IP host "THERMALTAKE" port 8002 ...3294132 ... Okay, IP Address = 192.168.1.23355909 Trying TCP/IP host "THERMALTAKE" port 8002 ...3355909 ... Okay, IP Address = 192.168.1.23410805 ****** End of session performance summary ******3410805 Total time connected = 0 seconds3410805 Reception maximum: 0 frames/sec, 0 bytes/sec3410805 Transmission maximum: 0 frames/sec, 0 bytes/sec3410805 Max receive buffer = 0, Max send depth = 0, Send frames lost = 03410805 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********also here is a fsx log i think******** FSUIPC4, Version 4.751a by Pete Dowson *********User Name="Robert Campbell"User Addr="rdtcmtt@yahoo.com"FSUIPC4 Key is providedWideFS7 Key is providedRunning inside FSX on Windows 7Module base=6100000078 System time = 09/01/2012 22:09:4978 FLT UNC path = "\\THERMALTAKE\Flight Simulator X Files\"109 Trying to connect to SimConnect Acc/SP2 Oct07 ...109 FS UNC path = "\\THERMALTAKE\Flightsim Folder\"530 LogOptions=00000000 00000001530 Wind smoothing fix is fully installed530 G3D.DLL fix attempt installed ok530 SimConnect_Open succeeded: waiting to check version okay530 Trying to use SimConnect Acc/SP2 Oct0721185 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)21185 Initialising SimConnect data requests now21185 FSUIPC Menu entry added21247 \\THERMALTAKE\Flight Simulator X Files\camtech.FLT21247 C:\Users\R6bert C\Documents\Flight Simulator X Files\IFR McCarran Intl to Indianapolis Intl.PLN21247 \\THERMALTAKE\Flightsim Folder\SimObjects\Airplanes\LVLD_B763_Winglet\B767-300.AIR21247 C:\Users\R6bert C\Documents\Flight Simulator X Files\IFR McCarran Intl to Indianapolis Intl.PLN i will start up the sim and then i load widefs and it will say im waiting for the server.how do i diagnos this to find the problem.cannot get help over at the peter dowson site , i have read the manual to where i can understand it.i just need a little help , has anyone ever have that problem.here is my log files i think.im just wanting to get to the bttom of this or where to start.im running w7 on both computers.same workgroupdid the servername or server address change in the ini file.im not for sure what is next, just dont send me to the fsuipc site:))thanks........Robert

Share this post


Link to post
Share on other sites
well folks i know there is a site for this topic , and i refuse to go to the fsuipc site to be told to read the frickin manual
I told you that precisely ONCE! And that was when you presented virtually no information and the most obviously likely solution was adding specific server data to the Client.INI.I see that you still refuse to show the WideServer log, which is much more revelant than the FSUIPC one. Good luck here if you continue to refuse to supply info requested as you did in my Forum!Pete

Share this post


Link to post
Share on other sites
Guest jahman
show the WideServer log
Um, that was ging to be my suggestion! :Big Grin:Cheers,- jahman.

Share this post


Link to post
Share on other sites

ok Peter where is the log , i sent what i thought was the log, so tell me where is the log.is it in the flightsim folder , c drive , where.Mister jahman pehaps you can tell me where the wideclient or widesever log is kept.i cannot believe im spending this much time on this , so please someone tell me where to look for it so that i can send Mister Dowson a log.Thanks....Robert

Share this post


Link to post
Share on other sites
Guest jahman

On your "server" (the PC running FSX), in your FSX directory under "Modules" (the directory where you installed FSUIPC4).Cheers,- jahman.

Share this post


Link to post
Share on other sites
ok Peter where is the log , i sent what i thought was the log, so tell me where is the log.is it in the flightsim folder , c drive , where.Mister jahman pehaps you can tell me where the wideclient or widesever log is kept.i cannot believe im spending this much time on this , so please someone tell me where to look for it so that i can send Mister Dowson a log.Thanks....Robert
On your server machine : FSX folderModulesWideserver.logHope this helpsPierre LFBE

Pierre LFBE

Share this post


Link to post
Share on other sites

thansk folks for the reply Mr Jahman and Mister Pierre LFBE , so not to be appearing foolish im in the FSX folder / module and i see the FSUIPC log file is that the wideserver log also.i dont see where it says wideserver log im sure im missing something here.Thanks..........Robert

Share this post


Link to post
Share on other sites
Guest jahman

Then it would seem your Wideserver was not started.Cheers,- jahman.

Share this post


Link to post
Share on other sites
Then it would seem your Wideserver was not started.
Yes, which means WideServer is not enabled in the FSUIPC options dialogue."Mr. Midnight" simply never supplied WideServer.log. Not once did he say it wasn't even there!Pete

Share this post


Link to post
Share on other sites

I must be in another planet or somthing now your going to tell me that it is not enabled ,so when im looking at fsuipc settings and see Diable Widefs what does that mean to you.that means to me that all is well , once again im wasting my time again with diolouge and spelling:)im not tring to prove a point here . i dont see widesever log , so there its not there.you say i dont have it enabled ,i say i do , im in fsuipc options and settings and on the right side i see FSUIPC registered to myself and below that it says WIDEFS registered to myself and below that it says Disable WIDEFS , what does that mean to you , to me that means if i push that radio button it will shut down WIDEFS. does it notso once again you want to prove a piont i dont i just want to know where a dummy like myself can fix this without looking like a dummy which im fast proving to be.So you are right in every way , where is the wideserver log.if it is not there than perhaps im getting somewhere .you say reloading does not help what does reloadeing the entire FSX and operating sytem help,i may be repeating myself .............................im sorry.....................Robert

Share this post


Link to post
Share on other sites

Mr Dowson i want to apollogize for my negetive to you , if not for you most of us would not be enjoying this Sim.i will figure this out.Your just trying to helpim sorry Mr. Dowson.................Robert

Share this post


Link to post
Share on other sites

He lost me when he said "i refuse to go to the fsuipc site to be told to read the frickin manual"Honey works a heck of lot better than vinegar.. Attitude.... Attitude.... Attitude.... :(

Share this post


Link to post
Share on other sites

Open FSX/Modules and take a screenshot of what is present and post the shot.

Share this post


Link to post
Share on other sites

As i said a bad attitude on my part , and pilot error .What i discovered was that i moved the files by mistake to my second computer the wideserver files that is .i put them back and every thing is fine , i started off with a foot in my mouth and how you can get three in there i dont know.So gentleman i can be your poster boy for idiot of the year or so.Thanks...........................Robert

Share this post


Link to post
Share on other sites

×
×
  • Create New...