Some comments on 3770K cooling w/ Noctua NH-D14

[Noel 119]

Some nice testimony:

 

 

Fantastic cooler

Pros: 1) Absolutely amazing cooling performance. I mated this with some Tuniq TX-2 paste and an i7 3770k, which was OCed immediately to 4.5 GHz @ 1.2v. On a cold boot in a room at 70 degrees F, you're looking at 26 C on the CPU. After the processor warms up a bit, it rises to a grand total of... 30 C. A torture test in prime95 brings it up to 65 C, give or take. Gaming rarely pushes the processor past 35-38 degrees C on any individual core.

[TechguyMaxC 370]

Temps on Ivy Bridge really aren't bad until you go beyond 1.2V. Bump her up to 1.3V (or higher) and 4.7GHz (or higher) and watch your temps skyrocket.

 

Nonetheless, congrats! You've got a fantastic new chip to play with. I'm quite happy with mine.

[Ben Cap 87]

1.2V

 

How high of an OC is achievable with this Vcore?

[molleh 190]

How high of an OC is achievable with this Vcore?

 

From my reading it seems like most people achive 4.5-4.6ghz and I have seen one or two at 4.7 with 1.2v.

[Ben Cap 87]

From my reading it seems like most people achive 4.5-4.6ghz and I have seen one or two at 4.7 with 1.2v.

 

After seeing some FSMark11 results, I have to say that I have greatly changed my perspective of the IB lineup.

I am eager to see some more tests before I make some final conclusions but, overall, I am pleased to see that the Ivy Bridge chips perform very well when paired with PCIe3, GTX680, and high performance memory.

 

Also, how are the temperatures on the IB chips when OC'ed to 4.5GHZ?

[SpiritFlyer 873]

I have to say that I have greatly changed my perspective of the IB lineup.

 

So are you a smidge now?

[Noel 119]

After seeing some FSMark11 results, I have to say that I have greatly changed my perspective of the IB lineup.

I am eager to see some more tests before I make some final conclusions but, overall, I am pleased to see that the Ivy Bridge chips perform very well when paired with PCIe3, GTX680, and high performance memory.

 

Also, how are the temperatures on the IB chips when OC'ed to 4.5GHZ?

 

I think it bodes well (ok, weller ;o)) for Haswell. If they decide to go to a better TIM perhaps there will be another quantum jump as was seen w/ SB chips.

[ramrunner800 10]

Also, how are the temperatures on the IB chips when OC'ed to 4.5GHZ?

 

I was in the low 60's @ 4.5 at load when I had my rig in the basement. I've since moved upstairs and now i'm in the low 80's . Ambient in here is in the region of 85-90F though, so you should be alright in a normal room.

[Ben Cap 87]

So are you a smidge now?

 

Yes! :LMAO: :LMAO: :LMAO:

[alainneedle1 97]

I was in the low 60's @ 4.5 at load when I had my rig in the basement. I've since moved upstairs and now i'm in the low 80's . Ambient in here is in the region of 85-90F though, so you should be alright in a normal room.

 

Put the rig in front of the refrigerator and keep the door open........... :hi: :Clown:

[AliB 0]

I just found this on Alibaba (not related)

 

http://www.alibaba.com/product-tp/108743860/_KITA_Airrex_Portable_Air_conditioner.html

 

Not joking, why not blow A/C cool air into the whole system, woohaa!

[Noel 119]

I just found this on Alibaba (not related)

 

http://www.alibaba.c...onditioner.html

 

Not joking, why not blow A/C cool air into the whole system, woohaa!

 

Been doing this for many years w/ no troubles. It keeps the room comfy in the hot part of the summer, plus has 3 fan speeds w/o A/C so you have excellent ventilation and don't need any other fans except for your CPU & hard drives. It's not too high tech, but the cardboard cowling allows the air to be directed thru 2 5" flex hoses, one at point blank range from the CPU's HSF, the other blows from about 2" out directly at the memory, main board & video card areas. This is a LOW FLOW, high volume solution, so better for static reduction, not too loud, and inexpensive to operate. The output air is right at 40F, which is a bit cool so I have the A/C set to cycle between A/C off + air flow on, and A/C on + air flow on using its digital temperature control setting.

 

NickN gave me a wag 'o the finger, however I maintain it's perfectly safe. Yes, did have a CPU die, but I had another good explanation for that.

[AliB 0]

That´s a mighty fine setup Noel, rustic, solid and ugly, but it works!

 

:Peace:

[dazz 69]

floppy disk!

[Noel 119]

floppy disk!

 

Hehe, yes how about that Dazz! You can see by me components I like to get as much out of a system as possible! That Lian Li case has held a few major upgrades. And you know what, I can tell you if you saw the excellent flight I had yesterday you would have wondered what was under the hood of that sucker! Just have to be mindful of the situation: for the big terminals in add on scenery, I keep it to the Super MD80 or QW757. When it comes to the NGX or PMDG 747 I have to be careful to keep in lighter areas, but in the end I have smooth & beautiful performance w/ very acceptable frames, and all of this on a 3-4y/o system. Unless I have a system meltdown, I'm holding out for Haswell next year. Maybe they'll improve the TIM on that one who knows ...

 

That´s a mighty fine setup Noel, rustic, solid and ugly, but it works!

 

:Peace:

 

Hehe, thanks, it is pug fugly! When I want to push the old dud up to 4.2Ghz, I turn on the A/C and have temps around 54C at load. I lost interest in stressing the system though after killing my first Penryn quad which I ran at voltages over 1.4 which I maintain killed it. It certainly wasn't the temps.

[dazz 69]

Smart thinking of yours Noel.

Looks don't matter to me either.

[Ben Cap 87]

Maybe someday, I'll have a chilled liquid system. It would be nice to have a Haswell @ 6GHZ with FSX. :Big Grin:

[Noel 119]

Maybe someday, I'll have a chilled liquid system. It would be nice to have a Haswell @ 6GHZ with FSX. :Big Grin:

 

Now that piques my interest Ben! Quiet at 6Ghz would be something to brag about...today ;o)