Jump to content

Archived

This topic is now archived and is closed to further replies.

Mike_CFII_MEL

BufferPools=o & P3D

Recommended Posts

Hi,

 

I've never been able to use Bufferpools=0 while using FSX, but it seems to work well with P3D ver. 1.4, I also tried a few other tweaks (thanks Word Not Allowed) and I'm happy with the results.

 

Warning, this image is 5760x1200, I run a triple monitor setup. I have the PMDG 737NGX sitting on the active runway at KMIA, frames are set to unlimited and I'm using the external FPS limiter, its locked at 30. Unable to test at FSDT, F/B, Cloud 9 until a new addon manager is made available for P3D ver. 1.4.

 

--------------------------------------------

I'm getting 30FPS, that's just sweet

--------------------------------------------

 

http://www.rmfc.us/photos/P3D.jpg


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post

Hi Mike,

 

I'm running a very similar setup to you, triple screen @ 6060 x 1080 and have a few tweaks including bp=0 and fftf=0.2 and I'm seeing vast fps improvements over fsx. And that's fully loaded with utx, rexe and enough aerosoft airports to shake a stick at.

 

Best wishes,

Jess B

Share this post


Link to post

BP=0 Gives me lower FPS in P3D for some reason.

Share this post


Link to post

Hey Ben,

 

So you've finally come over to the dark (P3D) side... :lol:


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post

Hey Ben,

 

So you've finally come over to the dark (P3D) side... :lol:

 

LOL!

 

I have been using P3D on and off for nearly a year now. I purchased it back when v1.2 was released and I flew with it for a few weeks.

 

I finally shelled out the cash to get v1.4 and I am really liking some of the newer features. I have already noticed FPS improvements and everything tends to have better coloring. Overall, I plan to slowly make the transition to P3D as most of the addons I use regularly work flawless in P3D.

Share this post


Link to post

BP=0 Gives me lower FPS in P3D for some reason.

Hey Ben,

 

So you've finally come over to the dark (P3D) side... :lol:

 

I take back what I said... I accidentally didn't save my CFG when I added BP=0. It's fixed now and holy cow my FPS are awesome!! - This is around 20% better FPS than FSX with the same settings.

Share this post


Link to post

Hey Ben

 

Like I said in another post I made, don't remember where. P3D 1.4 is much better than P3D 1.3 and is much, much better than FSX. Ive seen (with my own eyes) the stability, smoothness, increase in performance and reduction of scenery (for example: blurry) problems to ever switch back to FSX.

 

For me, P3D is the sim of the future!


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post

Hey Ben

 

Like I said in another post I made, don't remember where. P3D 1.4 is much better than P3D 1.3 and is much, much better than FSX. Ive seen (with my own eyes) the stability, smoothness, increase in performance and reduction of scenery (for example: blurry) problems to ever switch back to FSX.

 

For me, P3D is the sim of the future!

 

 

I completely agree! My only issue is moving all of my addons over... ugh lol

Share this post


Link to post

Hey Ben,

 

I hear ya...

 

 

My only issue is moving all of my addons over... ugh lol


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post

Hey Ben

 

Like I said in another post I made, don't remember where. P3D 1.4 is much better than P3D 1.3 and is much, much better than FSX. Ive seen (with my own eyes) the stability, smoothness, increase in performance and reduction of scenery (for example: blurry) problems to ever switch back to FSX.

 

For me, P3D is the sim of the future!

 

Hi Mike, i try the prepard3d 1.4 and i have lower fps than fsx in a similar res from you, i have 5760x1080, can you say me what are you settings in the prepar3d and the tweaks applied in the prepar3d.cfg file.

 

Sorry for my poor english, i talk from Spain

 

Regards

Share this post


Link to post

Hi,

 

[bufferPools]

Usepools=0

 

[Main]

FIBER_FRAME_TIME_FRACTION=0.12

 

BufferPools is a key entry in my P3D config setup, that tweak jumps my FPS 10, 12, 15,20 FPS. Just keep in mind you'll need a video board that has at least 2gb memory, if not your more than likely going to experience CTD's while using P3D.

 

Hi Mike, i try the prepard3d 1.4 and i have lower fps than fsx in a similar res from you, i have 5760x1080, can you say me what are you settings in the prepar3d and the tweaks applied in the prepar3d.cfg file.

 

Sorry for my poor english, i talk from Spain

 

Regards


signature.jpg
Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings

 

One-I7/6950X | Three-I7/4700Ks | Three-I7/6700Ks | Three-Nvidia Geforce GTX 1080s | Three-Nvidia Geforce 610s | Seven Sets-32GB Kingston DDR4 SDRAM 2600 | Seven-Cosair RM 850 P/S | Seven-Samsung EVO 850 SSDs | Seven-10/100/1000 Ethernet | Four-Corsair Hydo Series H115i Liquid CPU Cooling | Three-Cool Master Hyper D92 CPU Coolers

Flightdeck by Flightdeck Solutions | Hardware / Software Interface by Sim-Avionics

Share this post


Link to post

Hi,

 

[bufferPools]

Usepools=0

 

[Main]

FIBER_FRAME_TIME_FRACTION=0.12

 

BufferPools is a key entry in my P3D config setup, that tweak jumps my FPS 10, 12, 15,20 FPS. Just keep in mind you'll need a video board that has at least 2gb memory, if not your more than likely going to experience CTD's while using P3D.

 

Thanks for your answer Mike, but my config file are the same from you, but i have low fps i think it's my setup of the prepar3d interface, they are slightly different from FSX.

 

What are you Settings-Scenery applied? fps?

 

Regards from Spain

Carlos M.

Share this post


Link to post

Carlos, if this helps, in my sig you can find the blog in which my settings for the P3D are found. Maybe set it exactly and see what you get?

Share this post


Link to post

Hi Mike, i try the prepard3d 1.4 and i have lower fps than fsx in a similar res from you, i have 5760x1080, can you say me what are you settings in the prepar3d and the tweaks applied in the prepar3d.cfg file.

 

Dont know what CPU your using but you might give this a read and some thought.

 

http://www.prepar3d.com/forum-5/?mingleforumaction=viewtopic&t=1336.0

Share this post


Link to post

Carlos, if this helps, in my sig you can find the blog in which my settings for the P3D are found. Maybe set it exactly and see what you get?

 

Thanks Word Not Allowed, i try it, but always have a few fps more in fsx than p3d

 

Regards from Spain

 

Hi,

 

[bufferPools]

Usepools=0

 

[Main]

FIBER_FRAME_TIME_FRACTION=0.12

 

BufferPools is a key entry in my P3D config setup, that tweak jumps my FPS 10, 12, 15,20 FPS. Just keep in mind you'll need a video board that has at least 2gb memory, if not your more than likely going to experience CTD's while using P3D.

 

Thanks Mike, i write my config setup with your tweaks, and the p3d config by Word Not Allowed, but still have a few fps more in fsx than p3d.

 

One question in a heavy airport what are your medium fps in daytime and nigttime?

 

Thanks Mike

 

Regards from Spain

Share this post


Link to post
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    21%
    $5,465.00 of $25,000.00 Donate Now
×
×
  • Create New...