Jump to content

Archived

This topic is now archived and is closed to further replies.

Brenchen

Will SLI benefit Multiple Screen Setup?

Recommended Posts

Hi all,

 

I currently have a GTX580 which by default supports 2 monitors. I have 2 1920x1080 monitors now plugged into this card and have FSX flying on one monitor in windowed mode.

 

Now my question is: As now I am building a CPU focused computer, with room to expand (both cooling and possibly PSU) to SLi; should I stay with just the single 580 now - with a powerful CPU, will I be bottlenecked by the GPU having FSX expanded across the two monitors (kind of like getting a wider view effect)? Or in my case, it would probably be better to get an additional GTX580 and have them running in SLi?


Brendan Chen

 

Learning to use and getting use to FSX!

Share this post


Link to post
Share on other sites

If I remember correctly you cannot span across two displays in a "wide view" mode. Only creating a separate, 2nd Window and drag over to the 2nd display. But that hit's you FPS quite hard. You need three displays to take advantage of Nvidia Surround. But in order to get three displays you will have to buy a second GPU (I think 680's and above allow for three displays off one card, but not the 580).

 

I have two 580's working three 27" displays in Surround - good setup. If considering a 2nd 580 check out Ebay. I picked up a factory sealed 580 for $150! Lucky I one the bid, ha!

 

Clutch


socal-dusk.jpg

simwestFOTOREAL series
Photoreal scenery you'll want to fly thru, not over

 

Share this post


Link to post
Share on other sites

Get single GTX 680 4 gb edition, you can Surround on that single card. As a general rule SLI decreases FSX performance, not saying you couldn´t get decent performance, I take it Clutch is happy. I haven´t tried it, but Jet Line Systems have published their results on different setups, I trust ´em so far. http://www.jetlinesystems.com/performance.php

I´m getting the above, and I even plan to add a fourth, touch, screen.


"I´ll rather be down here wishing I was up there

than be up there wishing I was down here"

Share this post


Link to post
Share on other sites

Just to add upon what 'Crewcut' said, I am using Prepar3D where I see an increase of performance with SLI. I see a decrease in performance when I use FSX. So yea, I am one happy camper! :P


socal-dusk.jpg

simwestFOTOREAL series
Photoreal scenery you'll want to fly thru, not over

 

Share this post


Link to post
Share on other sites

In FSX using SLI you only benefit in Spotplane view.

In all other views it does not add anything.

 

I somewhere read that that has been fixed in P3D for the others views.


Gerard

7940x ( 14 cores ) : 14 cores @ 4.7 - Gigabyte X299 Gaming 7 - 32 Gb G.Skill Trident Z 3200Mhz Cl 14 - Inno3D RTX3090 X4 iCHILL 24 Gb - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 43” Sony 4K tv's in NVSurround

8700K : all 6 cores @ 5.0 GHz - Asus ROG 370 - 16 Gb 4000 MHz @ 3600 Mhz - Inno3D RTX 3090 X3 iCHILL 24 Gb  - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - 1x 55” Sony 4K tv

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post
Share on other sites

Also "cockpit view" without the cockpit is supposed to benefit from SLI, or at least not take a performance hit. So, if you build a cockpit and dont need the 3D pit, SLI for multi screen setup is a go. But not for "Traveling Uncle" Bren :wink:


"I´ll rather be down here wishing I was up there

than be up there wishing I was down here"

Share this post


Link to post
Share on other sites

Just to add upon what 'Crewcut' said, I am using Prepar3D where I see an increase of performance with SLI. I see a decrease in performance when I use FSX. So yea, I am one happy camper! :P

 

That's great to hear.

What sort of frame rate difference (SLI/non SLI) are you getting in P3D.

Thanks,

gb.


YSSY. Win 10, 6700K@4.8, Corsair H115i Cooler, GTX980Ti, 16GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.

Share this post


Link to post
Share on other sites

In FSX, with Nvidia Surround with SLI I was averaging mid teens consistently across three 27" displays. Think I was using Southern California or Las Vegas for testing areas. In P3D I tend to achieve high 20's in the same areas. I very often get 29.9 as my framerates are locked down at 30.

 

Don't get me wrong, you can still throw in enough stuff to drag P3D to it's knees too, but overall I notice right off better performance. That's what sold me to head full ojn into P3D.


socal-dusk.jpg

simwestFOTOREAL series
Photoreal scenery you'll want to fly thru, not over

 

Share this post


Link to post
Share on other sites

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    34%
    $8,650.00 of $25,000.00 Donate Now
×
×
  • Create New...