Jump to content
Sign in to follow this  
FS737Pilot

777 freezing

Recommended Posts

skipper72:  do you have AffinityMask set on your FSX.cfg?

 

I stopped getting the 8 minute freezes after setting that parameter in my FSX.cfg. My number is 14, as I have a 3570k i5 processor.

 

cheers

-E


Enrique Vaamonde

Share this post


Link to post
Share on other sites

I get very short hesitations with Milviz's excellent F15E sim; it's just a question of how much is being thrown at the CPU and RAM. You have to learn how to optimize for such deep aircraft. It's no trivial task to attempt to do so in the coding of same, for sure.

 

 

Sent from my iPad using Tapatalk

Share this post


Link to post
Share on other sites

The freezing that I have been experiencing has all but made the 777 unflyable for me. The freezes have developed from recoverable to unrecoverable. The latest flight CYVR-WSSS froze over the Alaskan Panhandle at bedtime. I left the flight the entire night and the flight did not recover. I had to end  process from the task bar in the morning. I have also tried restarting the flight via FSUIPC and the sim freezes at the same point every single time with AI on or off. I hope that PMDG has a fix for the aircraft or has some understanding of the conflicts because as it stands now I can not fly this airplane. I have never had issue like this with a PMDG aircraft. I trust resolution to the problem around the corner. 


Mike Keigley

 

Boeing777_Banner_Pilot.jpg

 

Share this post


Link to post
Share on other sites

skipper72: do you have AffinityMask set on your FSX.cfg?

 

I stopped getting the 8 minute freezes after setting that parameter in my FSX.cfg. My number is 14, as I have a 3570k i5 processor.

 

cheers

-E

After looking at my FSX.cfg I noticed that my affinity mask was set to a ridiculous number. I have no idea why it was set so high. I edited the number to 14. I reloaded the last flight that froze and kept sailing past the freeze point. So thanks for this suggestion so far it is working.


Mike Keigley

 

Boeing777_Banner_Pilot.jpg

 

Share this post


Link to post
Share on other sites

After looking at my FSX.cfg I noticed that my affinity mask was set to a ridiculous number. I have no idea why it was set so high. I edited the number to 14. I reloaded the last flight that froze and kept sailing past the freeze point. So thanks for this suggestion so far it is working.

 

I was wrong the freeze has returned. Setting affinity mask did not stop the freezes. 


Mike Keigley

 

Boeing777_Banner_Pilot.jpg

 

Share this post


Link to post
Share on other sites

What's your processor model? My AffinityMask at 14 is good for an i5 without hyperthreading. If you are using an i7 such as the 3370k or the 2600k you should probably use 84.


Enrique Vaamonde

Share this post


Link to post
Share on other sites

What's your processor model? My AffinityMask at 14 is good for an i5 without hyperthreading. If you are using an i7 such as the 3370k or the 2600k you should probably use 84.

No to 84 with HT=OFF. It should be 14.


System: MSFS2020-Premium Deluxe, ASUS Maximus XI Hero,  Intel i7-8086K o/c to 5.0GHz, Corsair AIO H115i Pro, Lian Li PC-O11D XL,MSI RTX 3080 SUPRIM 12Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, 32Gb Corsair Vengeance DDR4 3200Mhz RAM, Corsair R1000X Gold PSU,Win 11 ,LG 43UD79 43" 4K IPS Panel., Airbus TCA Full Kit, Stream Deck XL.

 

Share this post


Link to post
Share on other sites

Hello I did the tutorial flight on 777 to OMDB I was flying over the sea then bam it frozen on my fsx. It's a good model of the 777 but it freezes on my fsx I hope there be a fix soon

Share this post


Link to post
Share on other sites

No to 84 with HT=OFF. It should be 14.

 

That's exactly what I said. If you're using an HT enabled processor your AF should be 84. If you have no HT then AF = 14. 


Enrique Vaamonde

Share this post


Link to post
Share on other sites

I believe my experience with freezes during flight is primarily caused by over pushing the graphics (card) settings.

 

However, I'm still at a loss with FSX crashing with a fatal error on exit after flying the PMDG 777.


Harry Sung

Share this post


Link to post
Share on other sites

Hi I see I'm not alone with freezes and crashes.  Either PMDG screwed us or I got a bad download which I doubt.  Have been threw the forum and nothing seem to help it just freezes anytime I change views or make inputs with the controls.  I hope PMDG has a fix for this soon.  Also I see there is no longer a 2d cockpit.

 

So help from anyone would be nice all my other PMDG planes work fine.

Share this post


Link to post
Share on other sites

PMDG T777 is good for the bin...Unless they fix the issues quick. Their product is unusable and unstable.

 

It does not happen on the 737 NGX.

 

I spent $90 of my money to something that does not work properly, tweaks after tweaks.

 

The product overall is good but these darn bugs are making it look really bad and fustrating.

 

Their support is quiet.....Not bueno.

 

Regis


Regis Biassala 

Share this post


Link to post
Share on other sites

Hello, yet another joins the club.  I can tell you that I have an i7-4770k with 8Gb of high-end RAM.  The video card is the EVGA GTX780 superclocked.  All settings are per Nick N. and UTraffic is set at 40%.  My unused add-on airports are disabled except for the ones I'm actually flying out of and in to.  I'm a new owner of the PMDG777 and have just begun flying her.  Last night on my flight from KLAX-YSSY I got the freeze about an hour in to the flight.  So I did the one thing I thought of that might help - I eliminated the 2x Sparse Sampling in NVidia inspector.  Then began another flight this morning KLAX-PHNL.  Yes, another freeze climbing out of FL25,260  to FL320 in LNAV/VNAV.  Task Manager shows FSX not responding and I had to end the flight through TM.  I gave it time, but it never restored on its own.

 

I've read this thread all the way through and know of nothing else to do.  It's very frustrating after doing the LONG turnaround, much less the short.  Using the PFPX planner, great details and preparation, etc..  I'm about to give up and go back to FS9.  I don't know if it's FSX, PMDG, a combination of both, or what.  But... it should not be this hard to enjoy such a fantastic hobby!

Share this post


Link to post
Share on other sites

Sorry to hear Chuck, it is frustrating indeed. Have you tried the AffinityMask setting mentioned above? It did work for me. There are other users who solved the problem by updating to the latest version of the Realtek sound drivers. If you are a Realtek user, that is.

 

cheers

-E


Enrique Vaamonde

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...