Milviz F-86 causes Prepare3d applicatin to crash

[gpf3m 41]

When selecting the F-86 aircraft the program will run fine until I select the same aircraft but different skin, or when, for instance, selecting A2A Cessna Skyhawk after the F-86.  Prepar3d application will crash.  I have scanned my computer and it is free of malware ect.  Here is the fault I get:

Problem signature

Problem Event Name: APPCRASH

Application Name: Prepar3d.exe

Application Version: 1.4.4747.0

Application Timestamp: 50253a53

Fault Module Name: StackHash_7695

Fault Module Version: 6.1.7601.18229

Fault Module Timestamp: 51fb1072

Exception Code: c0000374

Exception Offset: 000ce753

OS Version: 6.1.7601.2.1.0.768.3

Locale ID: 1033

Additional Information 1: 7695

Additional Information 2: 769595e197b302907825ec7509292c5a

Additional Information 3: d418

Additional Information 4: d4188def81a6890fddfb219876e49256

 

[vonmar 122]

What is your OS and PC specs.

 

Is the Milviz F86 approved for P3D?

[gpf3m 41]

OS is WIN 7

i7 940 @ 2.93 GHz

8 Gig RAM

 

Milviz is approved to operate within Prepar3d

[vonmar 122]

What I would do first is:

 

Reboot the PC.

Start P3D with the default Mooney Bravo.

Load your aircraft.

Do your flight.

Exit P3D.

Reboot your PC.

 

See if you ever get an error this way.

[gpf3m 41]

Thank you for the suggestion.  I tried it and this did not fix issue

[gboz 157]

While Milviz allows their aircraft to be used in P3D they offer no technical support if you do.

I always get a "P3D has stoped working" error message when I close P3D after using the Sabre in it.

 

gb.

[gboz 157]

 

 

When selecting the F-86 aircraft the program will run fine until I select the same aircraft but different skin, or when, for instance, selecting A2A Cessna Skyhawk after the F-86. Prepar3d application will crash. I have scanned my computer and it is free of malware ect. Here is the fault I get:

 

I get almost the same error too when changing the Sabre to another skin or aircraft:

 

Problem signature:
  Problem Event Name:    APPCRASH
  Application Name:    Prepar3D.exe
  Application Version:    1.4.4747.0
  Application Timestamp:    50253a53
  Fault Module Name:    StackHash_bf79
  Fault Module Version:    6.1.7601.18229
  Fault Module Timestamp:    51fb1072
  Exception Code:    c0000374
  Exception Offset:    000ce753
  OS Version:    6.1.7601.2.1.0.768.3
  Locale ID:    3081
  Additional Information 1:    bf79
  Additional Information 2:    bf79afaa322b3e9c27eb95430ab77679
  Additional Information 3:    72cd
  Additional Information 4:    72cd47a8e32d26f7155a0beac189acf1

 

I cannot see this going away until Milviz supports P3D.

 

gb.

[vonmar 122]

If you do not select another aircraft after a flight:

If you just do this:

Reboot the PC.

Start P3D with the default Mooney Bravo.

Load your aircraft (any aircraft).

Do your flight in that aircraft.

Exit P3D.

*** Do you get a crash here?

Reboot your PC.

Note:
IMO, you have not given enough information about your set up for anyone to help very much.

The error message you have does not point to Milvix as the failing module that caused your problem.
 

Have you seen any other pilots reporting your problem?

[gpf3m 41]

Done what you have suggested and I get no crash. Application crashes only when the MILVIV F-86 is selected. The application will crash when attempting to select another aircraft or skin after using the F-86 or when, flying the F-86, selecting to exit program.

 

My system:

 

Dell Studio XPS 435 MT

i7 940 @2.93Ghz

12 gig RAM

NVIDIA GTX 460

WIN 7 64 bit

[vonmar 122]

I need to know about this statement ..
"Application crashes only when the MILVIV F-86 is selected"


If you just do this:

Reboot the PC.

Start P3D with the default Mooney Bravo.

Load the MILVIV F-86.

Do your flight in the MILVIV F-86.

Exit P3D.

*** Do you get a crash here?

Reboot your PC.

[gpf3m 41]

yes, I get the crash after using the F-86 and exiting program as well. Followed your suggestion. Application continues to crash.

 

I did this:

 

Reboot the PC.

 

Start P3D with the default Mooney Bravo.

 

Load the MILVIV F-86.

 

Do your flight in the MILVIV F-86.

 

Exit P3D.

 

*** Do you get a crash here? Yes.

 

Reboot your PC

[vonmar 122]

You have not given enough information about your set up (PC/hardware/running software/network etc.for anyone to help very much.

The error message you have does not point to Milviz as the failing module that caused your problem.
 

Have you seen any other pilots reporting your problem?

[vonmar 122]

Also,

 

Check here to make sure you have updated gauges (software Update) for the F86.

Milviz support forum:

North American F-86 Support Forum


http://www.milviz.com/forum/viewforum.php?f=70

 

[simmerhead 885]

Got the same problem. Anyone know a fix?

[vgbaron 3,508]

Just OOC - AFTER using the F-86 and BEFORE exiting P3D - what happens if you reload the default Mooney and then exit? Still crash?

 

Vic