Jump to content
Sign in to follow this  
jose88

Help to tune up my system

Recommended Posts

hello!

 

I have this PC:

 

i7 2600k @ 4,6Ghz

8GB RAM

EVGA GTX770 4GB SC

 

I have the AA in the Fixer at 8xCSAA

 

Nvidia Inspector with the settings in the How-To at 4xSGSS

 

30kru4w.jpg

 

If i put the FPS locked at 30 and 1/2 Refresh Rate, o get worse FPS that unlimited and less smooth. But if i put unlimited i think vsync don't work properly.

 

What i need to change? 

 

My cfg:

http://pastebin.com/gXPyAT0u

 

Thanks

 

 

EDIT:

 

With these settings, but with FPS UNLOCKED i have very good results. About 30fps with complex aircraft and payware scenery, and ASN active even in ground and air. Vsync working. But if i lock FPS to 30, i have worse FPS, in ground about 20. My system works better with FPS unlimited.

 

Is the NI settings properly for Vsync with the FPS unlocked?

 


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Hi,

 

First . Are you using FSX in Window-mode ? If Yes, then you need ForceWindowedVSync=1  in your fsx.cfg under  [Display]

 

I have no problems with Unlimited FPS (like you better than locked)

 

Check the "how to guide" once more for cross checking settings please

 

Michael Moe


Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post

No always in Full Screen. I have good performance and smooth FSX now with these settings and Unlimited FPS. But what is the correct setup for the Vsync with Unlimited FPS in NI?

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

No always in Full Screen. I have good performance and smooth FSX now with these settings and Unlimited FPS. But what is the correct setup for the Vsync with Unlimited FPS in NI?

 

Enviado desde mi Nexus 5 mediante Tapatalk

 

 

Did you read my post above for window mode by any chance? Other than that you are good to go i see

 

 

332.21

 

Michael 


Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post

Did you read my post above for window mode by any chance? Other than that you are good to go i see

 

 

332.21

 

Michael

Yes yes but I fly in Full Screen.

 

So 1/2 Refresh Rate is good for Full Screen ?

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Yes yes but I fly in Full Screen.

 

So 1/2 Refresh Rate is good for Full Screen ?

 

Enviado desde mi Nexus 5 mediante Tapatalk

 

 

Sorry . Yep with a 60HZ monitor

 

Michael


Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post

Dell U2311H

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Made a flight today and I noticed that the performance with the vsync running, at 1/2 in NI, is poor.

 

FPS unlimited. In the approach, with a few bad weather, I don't have very good performance.

 

I think this is not the best setup for me.

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

hello!

 

I have this PC:

 

i7 2600k @ 4,6Ghz

8GB RAM

EVGA GTX770 4GB SC

 

I have the AA in the Fixer at 8xCSAA

 

Nvidia Inspector with the settings in the How-To at 4xSGSS

 

30kru4w.jpg

 

If i put the FPS locked at 30 and 1/2 Refresh Rate, o get worse FPS that unlimited and less smooth. But if i put unlimited i think vsync don't work properly.

 

What i need to change? 

 

My cfg:

http://pastebin.com/gXPyAT0u

 

Thanks

 

 

EDIT:

 

With these settings, but with FPS UNLOCKED i have very good results. About 30fps with complex aircraft and payware scenery, and ASN active even in ground and air. Vsync working. But if i lock FPS to 30, i have worse FPS, in ground about 20. My system works better with FPS unlimited.

 

Is the NI settings properly for Vsync with the FPS unlocked?

See this threa:

 

http://forum.avsim.net/topic/436085-rivatuner-d3doverrider-and-vsynctearing-in-dx10/

 

Maybe that thread needs to be pinned.


A pilot is always learning and I LOVE to learn.

Share this post


Link to post

See this threa:

 

http://forum.avsim.net/topic/436085-rivatuner-d3doverrider-and-vsynctearing-in-dx10/

 

Maybe that thread needs to be pinned.

Works very well for me! FPS unlimited, Vsync at NI in force on, and all other settings of the How to doc. D3doverider running.

 

Now I have good performance and vsync working. Any suggestions?

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

ok guys! I think i have still problems...micro micro stutters i think

 

Repeat all my setup:

 

i7 2600k @ 4,6Ghz

GTX770 2GB

8 GB RAM

 

8xCSAA at the DX10Fixer

 

My fsx.cfg:

http://pastebin.com/tAakPbaD

 

My NI settings all setup with the how to guide. 4xSGSS (for 8xCSAA) 

 

Latest Nvidia Drivers installed. Dell U2311H 60Hz connected to the GTX770 DVI-D port.

 

EVEN with FPS locked at 30 in FSX and 1/2 RR at NI, or FPS unlimited and vsync Force on, i have micro stutters i think.

 

REX4 4096 textures for DX10 mode.

 

Please help me to calm these scenery stutters. I have good FPS always, but stuttering scenery. 

 

And another problem, i always lose vsync. Only have vsync with FPS unlimited, Force on and D3DOverider. With the 1/2 setting and 30 FPS locked, i don't have vsync. Only have one monitor!

 

In my test flights, no more than 50% of GPU usage (With GPU-Z), so is not related to GPU usage.

 

I'm frustrating! 


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Please!

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

ok guys! I think i have still problems...micro micro stutters i think

 

Repeat all my setup:

 

i7 2600k @ 4,6Ghz

GTX770 2GB

8 GB RAM

 

8xCSAA at the DX10Fixer

 

My fsx.cfg:

http://pastebin.com/tAakPbaD

 

My NI settings all setup with the how to guide. 4xSGSS (for 8xCSAA)

 

Latest Nvidia Drivers installed. Dell U2311H 60Hz connected to the GTX770 DVI-D port.

 

EVEN with FPS locked at 30 in FSX and 1/2 RR at NI, or FPS unlimited and vsync Force on, i have micro stutters i think.

 

REX4 4096 textures for DX10 mode.

 

Please help me to calm these scenery stutters. I have good FPS always, but stuttering scenery.

 

And another problem, i always lose vsync. Only have vsync with FPS unlimited, Force on and D3DOverider. With the 1/2 setting and 30 FPS locked, i don't have vsync. Only have one monitor!

 

In my test flights, no more than 50% of GPU usage (With GPU-Z), so is not related to GPU usage.

 

I'm frustrating!

EDIT: I only have this micro stutters (yes are minimal but noticeable) with comple aircraft like PMDG or AXE. With the default Flight (Glider at Friday Harbor) i have smooth like butter FSX and 100FPS

 

No one knows what I only have a 90% smooth FSX? But a good FPS?


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Have you tried replacing your rex cloud textures.  4096 HD clouds are heavy hitters. Try lower res clouds and see what happens.


System: MSFS2020-Premium Deluxe, ASUS Maximus XI Hero,  Intel i7-8086K o/c to 5.0GHz, Corsair AIO H115i Pro, Lian Li PC-O11D XL,MSI RTX 3080 SUPRIM 12Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, 32Gb Corsair Vengeance DDR4 3200Mhz RAM, Corsair R1000X Gold PSU,Win 11 ,LG 43UD79 43" 4K IPS Panel., Airbus TCA Full Kit, Stream Deck XL.

 

Share this post


Link to post

Tested also with clear weather (no clouds). Could be that I'm very obsesive, but I see a few of stutter.

 

Enviado desde mi Nexus 5 mediante Tapatalk


José Fco. Ibáñez /// i7 6700k (Delid) @ 4,6 Ghz /// Asrock Z170 OC Formula /// 16GB RAM G.Skill Ripjaws V 3200 /// GTX 1070 Founders Edition 8GB /// LG 27UD58 4K 27' // OCZ Vertex 4 SSD (X-Plane 10) & SAMSUNG 850 EVO SSD (P3D V3) /// Windows 10 Pro x64

 

sig_FSL-By-Wire.jpg

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...