Archived

This topic is now archived and is closed to further replies.

CrownCityMisfits

C195 Businessliner is Unusable in FSX

Recommended Posts

I want to love this plane.  Unfortunately it is immediately overstressed upon starting a flight. I even tried starting a flight with another aircraft, then switched to the C195, and again, immediately overstressed. It's unusable.

 

On a positive note, I get to look at the VC for about .2 seconds upon loading. It's beautiful!  :P

 

Patch coming soon?

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

I think If you turn off engine stress causes damage in the options that problem will no longer be present.

Share this post


Link to post
Share on other sites

I think If you turn off engine stress causes damage in the options that problem will no longer be present.

 

Engine stress damage wasn't the problem. Aircraft stress was. I turned it off and it flies.

 

If I turn it back on during flight, it overstresses again.

 

I don't enjoy flying with those setting turned off, but I appreciate the temp solution. Cheers.

Share this post


Link to post
Share on other sites

I always fly with all damage related settings turned off. I got tired of my planes exploding in mid-air because I was running the engine 50 RPM above specifications or having the plane disintegrate on the ground due to hitting invisible objects at add-on airports  :lol:

 

If you want proper damage modelling, get something from A2A, RealAir, Aerosoft etc.

Share this post


Link to post
Share on other sites

I always fly with all damage related settings turned off. I got tired of my planes exploding in mid-air because I was running the engine 50 RPM above specifications or having the plane disintegrate on the ground due to hitting invisible objects at add-on airports  :lol:

 

If you want proper damage modelling, get something from A2A, RealAir, Aerosoft etc.

 

Yeah I feel you. I love the A2A 172 and P51 Accusim models, Amazing stuff. I just like having something to keep my airspeed in check when flying my Alabeo/Carenado planes. Plus, it's just another checkbox I have to go click when I want to fly the 195. My preflight checklist for launching my sim is already freakin long enough!

Share this post


Link to post
Share on other sites

It's a copy & paste error in the aircraft.cfg file.  Simply delete these 4 lines and you can enable the crash detection again.

 

positive_g_limit_flaps_up=0.000000
positive_g_limit_flaps_down=0.000000
negative_g_limit_flaps_up=0.000000

negative_g_limit_flaps_down=0.000000 

Share this post


Link to post
Share on other sites

It's a copy & paste error in the aircraft.cfg file.  Simply delete these 4 lines and you can enable the crash detection again.

 

positive_g_limit_flaps_up=0.000000
positive_g_limit_flaps_down=0.000000
negative_g_limit_flaps_up=0.000000

negative_g_limit_flaps_down=0.000000 

 

Thank you sir. That worked. Deleting this won't cause any other issues? 

 

EDIT: Didn't work, actually. Those 4 lines re-write themselves back in to the cfg when I start a flight.

Share this post


Link to post
Share on other sites

Wow... I ask myself how something like this got through testing... perhaps they use the customers to test???

 

A

Share this post


Link to post
Share on other sites

1. Thank you sir. That worked. Deleting this won't cause any other issues? 

 

2. EDIT: Didn't work, actually. Those 4 lines re-write themselves back in to the cfg when I start a flight.

 

1. No it doesn't cause any issues because if you look at the cfg file you will see that the same entry with the correct numbers appears a bit lower again.

2. That's theoretically impossible. I'll recheck.  

 

Edit: I've never seen FSX re-write a cfg file automatically but that's actually the case here.

 

You need to enter the correct numbers from the lower section instead of deleting these 4 lines.  Sorry for the wrong initial solution.

 

positive_g_limit_flaps_up=  4.4
positive_g_limit_flaps_down= 3.9
negative_g_limit_flaps_up= -2.0
negative_g_limit_flaps_down= -1.7

Share this post


Link to post
Share on other sites

Really poor that this made it past Carabeo's "testing" regime IMHO .....   <_<

 

Just shoddy, the sprint to grab money over proper quality control.

Share this post


Link to post
Share on other sites

The reason for this is that as very few users use the crash detection in FSX. Testing planes in FSX with the crash detection enabled would be extremly annoying.

Furthermore a lot of add-ons need the crash detection to be turned off to allow belly landings.

 

But at least all the whiners like Dave an Andrew should be happy that they have something to complain.

Share this post


Link to post
Share on other sites

But at least all the whiners like Dave an Andrew should be happy that they have something to complain.

 

That's just an unfounded personal attack, with no basis, Bernt Stolle. (wonder why you're not posting under your own name, as a commercial member these days?).......

 

It is a fair bit of feedback - but you can of course choose to take it personally, as you do with anyone who dares to offer any feedback about your work.......  

 

I wonder if I will get another vicious PM from you, as I have on other occasions (under your real ID of course), where I have dared to give feedback on some aspects of your work.

 

Pretending to be someone else, and not disclosing your commercial interest in not acceptable IMHO .... especially when it is purely to be able to post personal and unfounded comments about people, calling them "whiners" just for expressing a valid opinion.

Share this post


Link to post
Share on other sites

Guys like you are the reason why I stopped posting here and I promise that I'll don't do that again here, that was certainly a big mistake. 

FYI I'm not a commercial member and I certainly don't have to explain it to you why not.

I hope you take a vacation from FSX again soon as it's much nicer here without your hate reviews and agressive attitude (e.g. Wilco TBM)

Another vicious PM ??? Huh??? You blocked my response immediately because you don't like it if others don't share your holy opinion.

Share this post


Link to post
Share on other sites

Ok, Bernt.

 

You have shown a little bit about who you are here, and I have too.

 

People can make up their own mind.   

 

Someone who is receiving financial gain for being a contributor to a Commercial flight sim product (in this case Alabeo) is a Commercial Member.    I'm not sure what else you think the title refers too.....


 

I hope you take a vacation from FSX again soon as it's much nicer here without your hate reviews and agressive attitude (e.g. Wilco TBM)

 

Ha ha, that is seriously funny to me.    It made me smile and made my day.   How old are you?

Share this post


Link to post
Share on other sites

Never been called a "whiner" before...

 

Dave, if you are right, then I am dumbfounded. I actually think the FDE's that Bernt has done over the years to be one of the major selling points for any addon aircraft... and made such statements not only here...

 

Well, the thanks one gets...

 

A

Share this post


Link to post
Share on other sites

Are we good now? I am. Alabeo sent me a new cfg so I'm happy. Problem resolved.

 

I'll give them a pass on this small mistake since all of their other planes have brought me so much joy in the past.

Share this post


Link to post
Share on other sites

Are we good now? I am. Alabeo sent me a new cfg so I'm happy. Problem resolved.

 

I'll give them a pass on this small mistake since all of their other planes have brought me so much joy in the past.

 

Did they say whether they'll release it as a patch?

Share this post


Link to post
Share on other sites

Can a small point be cleared up for me? The 'positive_g_limit_flaps_up' etc. entries, should they be in [FLAPS] or [airplane geometry]? This is what my .cfg looks like; The 0 entries did indeed reinsert themselves!

 

[airplane_geometry]

blah

blah

blah

positive_g_limit_flaps_up=4.4
positive_g_limit_flaps_down=3.9
negative_g_limit_flaps_up=-2.0
negative_g_limit_flaps_down=-1.7
load_safety_factir=1.5
positive_g_limit_flaps_up=0.000000
positive_g_limit_flaps_down=0.000000
negative_g_limit_flaps_up=0.000000
negative_g_limit_flaps_down=0.000000

[flaps.0]
type=1
//positive_g_limit_flaps_up=4.4
//positive_g_limit_flaps_down=3.9
//negative_g_limit_flaps_up=-2.0
//negative_g_limit_flaps_down=-1.7 

blah

blah

blah

 

An answer would be appreciated without biting each other's heads off!  :biggrin:                 

Share this post


Link to post
Share on other sites

Can a small point be cleared up for me? The 'positive_g_limit_flaps_up' etc. entries, should they be in [FLAPS] or [airplane geometry]? This is what my .cfg looks like; The 0 entries did indeed reinsert themselves!

 

An answer would be appreciated without biting each other's heads off!  :biggrin:

 

Alabeo support kindly sent me a new cfg. Some other things may have changed, so here is the data in it's entirety:

 
//*********************************************************
// ALABEO C195 BusinessLiner FSX/P3D
// Copyright © Alabeo 2014 - All Rights Reserved
//*********************************************************
 
[fltsim.0]
title=Alabeo C195 WHITE
sim=C195
model=
panel=
sound=
texture=
kb_checklists=
kb_reference=
atc_id=
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=WHITE
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.1]
title=Alabeo C195 N654ER
sim=C195
model=
panel=
sound=
texture=1
kb_checklists=
kb_reference=
atc_id=N654ER
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=N654ER
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.2]
title=Alabeo C195 N784RA
sim=C195
model=
panel=
sound=
texture=2
kb_checklists=
kb_reference=
atc_id=N784RA
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=N784RA
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.3]
title=Alabeo C195 N354MP
sim=C195
model=
panel=
sound=
texture=3
kb_checklists=
kb_reference=
atc_id=N354MP
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=N354MP
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.4]
title=Alabeo C195 N9654H
sim=C195
model=
panel=
sound=
texture=4
kb_checklists=
kb_reference=
atc_id=N9654H
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=N9654H
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.5]
title=Alabeo C195 N683CB
sim=C195
model=
panel=
sound=
texture=5
kb_checklists=
kb_reference=
atc_id=N683CB
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=N683CB
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
[fltsim.6]
title=Alabeo C195 NI62MP
sim=C195
model=
panel=
sound=
texture=6
kb_checklists=
kb_reference=
atc_id=NI62MP
ui_manufacturer="Alabeo"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=NI62MP
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
 
 
[General]
atc_type=Cessna
atc_model=C195
editable=0
performance="Maximum Speed\t\n161 kts\t185 mph\t298 kmh\n\nCruise Speed\t\n148 kts\t170 mph\t274 kmh\n\nEngine\t\nJacobs R-755 Radial Engine\t300 hp\n\nPropeller\t\nHamilton Standard, 2 Bladed, constant speed\n\nMaximum Range\t\n695 nm\t800 sm\t1287 km\n\nService Ceiling\t\n18300 ft\t\t5578 m\n\nFuel Capacity\t\n75 U.S. gal\t284 L\n\nEmpty Weight\t\n2100 lb\t953 kg\n\nMaximum Gross Weight\t\n3350 lb\t1520 kg\n\nUseful Load\t\n1250 lb\t567 kg\n\nLength\t\n27,33 ft\t8,33 m\n\nWingspan\t\n36,16 ft\t11,02 m\n\nHeight\t\n7,17 ft\t2,18 m\n\nSeating\t\n5"
Category = airplane
 
[WEIGHT_AND_BALANCE]
max_gross_weight = 3350                           // (pounds)
empty_weight =     2100                           // (pounds)
 
;Moments of Inertia
empty_weight_pitch_MOI   = 2000
empty_weight_roll_MOI    = 2000
empty_weight_yaw_MOI     = 2700
empty_weight_coupled_MOI =    0
 
reference_datum_position =  0, 0, 0       // (feet) distance from FlightSim Reference position, which is: (1/4 chord, centerline, waterline)
empty_weight_CG_position =  0, 0, 0       // (feet) longitudinal, lateral, vertical distance from specified datum
 
max_number_of_stations =        6
station_load.0 = 185,  0,    0, 0         //Weight(lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 =   0,  0,    0, 0
station_load.2 =   0, -1, -0.5, 0
station_load.3 =   0, -1,  0.0, 0
station_load.4 =   0, -1,  0.5, 0
station_load.5 =   0, -2,  0.0, 0
station_name.0 = "pilot" 
station_name.1 = "fwd pax" 
station_name.2 = "left pax"
station_name.3 = "mid pax" 
station_name.4 = "right pax"   
station_name.5 = "bag 220lbs"     
 
[flight_tuning]
cruise_lift_scalar          = 1.0
parasite_drag_scalar        = 1.0
induced_drag_scalar         = 1.5
elevator_effectiveness      = 1.0
aileron_effectiveness       = 1.0
rudder_effectiveness        = 1.0
pitch_stability             = 1.0
roll_stability              = 1.0
yaw_stability               = 1.0
elevator_trim_effectiveness = 1.0
aileron_trim_effectiveness  = 1.0
rudder_trim_effectiveness   = 0.1
p_factor_on_yaw             = 0.5
torque_on_roll              = 0.5
hi_alpha_on_roll     = 0.5
hi_alpha_on_yaw     = 0.5
gyro_precession_on_yaw     =  0.5
gyro_precession_on_pitch   =  0.5
 
[GeneralEngineData]
engine_type =        0                          //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop
Engine.0 =  7, 0, -0.5                          //(feet) longitudinal, lateral, vertical distance from reference datum
fuel_flow_scalar=  0.9                          //Fuel flow scalar
min_throttle_limit = 0                          //Minimum percent throttle.  Generally negative for turbine reverser
 
[piston_engine]
power_scalar =               1                  //Piston power scalar
cylinder_displacement= 70                       //Cubic inches per cylinder
compression_ratio= 8.1                          //Compression ratio
number_of_cylinders=9                           //Number of cylinders
max_rated_rpm= 2200                             //Max rated RPM
max_rated_hp= 300                               //Max rated HP
fuel_metering_type= 1                           //0=Fuel Injected, 1=Gravity Carburetor, 2=Aerobatic Carburetor
cooling_type= 0                                 //0=Cooling type Air, 1=Cooling type Liquid
normalized_starter_torque=             1        //Starter torque factor
turbocharged= 0                                 //Is it turbocharged? 0=FALSE, 1=TRUE
max_design_mp=  0                               //Max design manifold pressure, (inHg)
min_design_mp=  0                               //Min design manifold pressure, (inHg)
critical_altitude= 0                            //Altitude to which the turbocharger will provide max design manifold pressure (feet)
emergency_boost_type= 0                         //0=None, 1=Water Injection, 2=Methanol/Water injection, 3=War Emergency Power
emergency_boost_mp_offset= 0                    //Additional manifold pressure supplied by emergency boost
emergency_boost_gain_offset= 0                  //Multiplier on manifold pressure due to emergency boost
fuel_air_auto_mixture= 0                        //Automixture available? 0=FALSE, 1=TRUE
auto_ignition= 0                                //Auto-Ignition available? 0=FALSE, 1=TRUE
max_rpm_mechanical_efficiency_scalar=  1        //Scalar on maximum RPM mechanical efficiency
idle_rpm_mechanical_efficiency_scalar= 1        //Scalar on idle RPM mechanical efficiency
max_rpm_friction_scalar=               1        //Scalar on maximum RPM friction
idle_rpm_friction_scalar=              1        //Scalar on idle RPM friction
detonation_onset = 36                           
 
[propeller]
thrust_scalar =                     1           //Propeller thrust scalar
propeller_type=                     0           //0=Constant Speed, 1=Fixed Pitch
propeller_diameter=               7.6           //Propeller Diameter, (feet)
propeller_blades=                   2           //Number of propeller blades
propeller_moi=                   10.9           //Propeller moment of inertia
beta_max=                          40           //Maximum blade pitch angle for constant speed prop, (degrees)
beta_min=                          15           //Minimum blade pitch angle for constant speed prop, (degrees)
min_gov_rpm=                     1000           //Miminum governed RPM
prop_tc=                          0.1           //Prop time-constant
gear_reduction_ratio=               1           //Propeller gear reduction ratio
fixed_pitch_beta=                  20           //Fixed pitch angle of fixed pitch prop, (degrees)
low_speed_theory_limit=            80           //Speed at which low speed theory becomes blended in (feet/second)
prop_sync_available=                0           //Prop synchronization available? 0=FALSE, 1=TRUE
prop_deice_available=               0           //Prop de-icing available? 0=FALSE, 1=TRUE
prop_feathering_available=          0           //Prop feathering available?  0=FALSE, 1=TRUE
prop_auto_feathering_available=     0           //Prop auto-feathering available?  0=FALSE, 1=TRUE
min_rpm_for_feather=                0           //Minimum RPM for prop feathering
beta_feather=                       0           //Feathering pitch angle (degrees)
power_absorbed_cf=                  0           //Coefficient of friction for power absorbed by propeller
defeathering_accumulators_available= 0          //Defeathering accumulators available? 0=FALSE, 1=TRUE 
prop_reverse_available=             0           //Prop reverse available?  0=FALSE, 1=TRUE
minimum_on_ground_beta=             0           //Miminum pitch angle on ground, (degrees)
minimum_reverse_beta=               0           //Minimum pitch angle in reverse, (degrees)
 
 
        //0  Class
        //1  Longitudinal Position        (feet)
        //2  Lateral Position             (feet)
        //3  Vertical Position            (feet)
        //4  Impact Damage Threshold      (Feet Per Minute)
        //5  Brake Map                   (0=None, 1=Left, 2=Right)
        //6  Wheel Radius                (feet)
        //7  Steer Angle                         (degrees)
        //8  Static Compression           (feet)  (0 if rigid)
        //9  Max/Static Compression Ratio
        //10 Damping Ratio               (0=Undamped, 1=Critically Damped)
        //11 Extension Time              (seconds)
        //12 Retraction Time             (seconds)
        //13 Sound Type
 
[contact_points]
point.0= 1,  -18.4,   0.0, -0.65, 1500, 0, 0.5, 60, 0.03, 2.0, 0.7, 0, 0, 0, 0.0, 0.0
point.1= 1,   2.25,  -3.8, -5.45, 1500, 1, 1.2,  0, 0.28, 2.0, 0.8, 0, 0, 2, 0.0, 0.0
point.2= 1,   2.25,   3.8, -5.45, 1500, 2, 1.2,  0, 0.28, 2.0, 0.8, 0, 0, 3, 0.0, 0.0
point.3= 2,    2.0, -15.0,  3.70, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 5, 0.0, 0.0    
point.4= 2,    2.0,  15.0,  3.70, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 6, 0.0, 0.0    
point.5= 2,   -1.5, -13.5, -1.00, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 5, 0.0, 0.0    
point.6= 2,   -1.5,  13.5, -1.00, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 6, 0.0, 0.0 
point.7= 2,   -3.0, -12.0, -1.50, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 5, 0.0, 0.0    
point.8= 2,   -3.0,  12.0, -1.50, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 6, 0.0, 0.0     
point.9= 2,  -12.5,   0.0,  5.50, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 9, 0.0, 0.0    
point.10= 2,     5,   0.0,  0.00, 1500, 0, 0.0,  0, 0.00, 0.0, 0.0, 0, 0, 4, 0.0, 0.0   
 
static_pitch =    12.5
static_cg_height = 4.5
tailwheel_lock=      0
 
[brakes]
parking_brake = 1       //Parking brake available
toe_brakes_scale = 0.7 //Brake scalar
differential_braking_scale = 1.0        //Delta on the amount of brake when the rudder pedals deflected
auto_brakes = 0
 
[electrical]
max_battery_voltage = 12.0
generator_alternator_voltage = 13.8
max_generator_alternator_amps = 40.0
 
;BusType, MaxAmpLoad, MinVoltage       BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)
avionics_bus       = 0, 5 , 9.5
avionics           = 1, 5 , 9.5
additional_system  = 0, 2 , 9.5
marker_beacon      = 1, 2 , 9.0
fuel_pump          = 0, 5 , 9.0
 
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 =  4,  1.2, 0.0, 0.5, fx_vclightalaccnc
 
[hydraulic_system]
normal_pressure = 0.0    //PSI        
 
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1       = 1
Com.1         = 1, 1
Com.2         = 1, 1
Nav.1         = 1, 1, 1
Nav.2         = 1, 1, 0
Adf.1         = 0
Transponder.1 = 1
Marker.1      = 1
 
[direction_indicators]
//1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another
//2 Indicator number of slaving indicator if Type = 4
direction_indicator.0=0,0
 
[attitude_indicators]
//Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro
attitude_indicator.0 = 1 
 
[turn_indicators]
//Type: 0=None, 1=Electric Gyro, 2=Vacuum Gyro
turn_indicator.0=1,0
 
[vacuum_system]
max_pressure=5.15   //PSI
vacuum_type=1   //Type: 0=None, 1=Engine pump (default), 2=Pneumatic, 3=Venturi
engine_map=1
 
[pneumatic_system]
max_pressure=0.000000
 
[pitot_static]
vertical_speed_time_constant = 1                //Increasing this value will cause a more instantaneous reaction in the VSI
pitot_heat = 1.0    //Scalar on heat effectiveness, 0 = not available
 
[EFFECTS]
wake=fx_wake
water=fx_spray
dirt=fx_tchdrt
concrete=fx_sparks
touchdown=fx_tchdwn_s, 1
 
[fuel]
Leftmain  = 0, -3, 2, 38, 1  
Rightmain = 0,  3, 2, 38, 1      
 
fuel_type = 1                                 //Fuel type: 1 = Avgas, 2 = JetA
number_of_tank_selectors = 1                    
electric_pump=1
 
[airplane_geometry]
wing_area               =   218                  
wing_span               =    36                   
wing_root_chord         =     7                   
wing_dihedral           =     0                   
wing_incidence          =     0                   //Degrees
wing_twist              =     0                   //Degrees
oswald_efficiency_factor=     1                   
wing_winglets_flag      =     0                   
wing_sweep              =     0                   
wing_pos_apex_lon       =     1                   //Feet, longitudinal distance from reference point, negative going aft
wing_pos_apex_vert      =     1                   //Feet, vertical distance from reference point, positive going up
htail_area              =    16                   //Square feet
htail_span              =    10                   //Feet
htail_pos_lon           =   -12                   //Feet, longitudinal distance from reference point, negative going aft
htail_pos_vert          =   1.5                   //Feet, vertical distance from reference point, positive going up
htail_incidence         =     0                   //Degrees
htail_sweep             =    33                   //Degrees, horizontal tail leading edge
vtail_area              =     9                   //Square feet
vtail_span              =     5                   //Feet, tip to body
vtail_sweep             =    27                   //Degrees, vertical tail leading edge
vtail_pos_lon           =   -12                   //Feet, longitudinal distance from reference point, negative going aft
vtail_pos_vert          =     3                   //Feet, vertical distance from reference point, positive going up
elevator_area           =    15                   //Square feet
aileron_area            =    17                   //Square feet
rudder_area             =    10                   //Square feet
elevator_up_limit       =    28                   
elevator_down_limit     =    17                   
aileron_up_limit        =    25                   
aileron_down_limit      =    25                   
rudder_limit            =    21                   
elevator_trim_limit     =     9                   
spoiler_limit           =     0                   
spoilerons_available    =     0                   
aileron_to_spoileron_gain =   0                   
min_ailerons_for_spoilerons = 0                   
min_flaps_for_spoilerons =    0                   
auto_spoiler_available   =    0
positive_g_limit_flaps_up=4.4
positive_g_limit_flaps_down=3.9
negative_g_limit_flaps_up=-2.0
negative_g_limit_flaps_down=-1.7
load_safety_factir=1.5
 
[flaps.0]
type=1                                   
span-outboard=   0.4                                 
extending-time=    7                             
flaps-position.0=  0                           
flaps-position.1= 45                                                            
damaging-speed=  130                                 
blowout-speed=   140                               
lift_scalar=       1                                       
drag_scalar=       1
pitch_scalar=      1
system_type=       2  
 
 
[Reference Speeds]
flaps_up_stall_speed    =  54                     //Knots True (KTAS)
full_flaps_stall_speed  =  53                     //Knots True (KTAS)
cruise_speed            = 120                     //Knots True (KTAS)
max_indicated_speed     = 205                     //Red line (KIAS)
 
[stall_warning]
type=2
stick_shaker=0
 
[deice_system]
structural_deice_type=0     //0 = None, 1 = Heated Leading Edge, 2 = Bleed Air Boots, 3 = Eng Pump Boots
 
[exits]
number_of_exits = 4
exit.0 = 0.4 // (0=Main 1=Emergency)
exit.1 = 0.4 // (0=Main 1=Emergency)
 
[autopilot]
autopilot_available= 0
flight_director_available= 0
 
[forcefeedback]
ground_bumps_magnitude1=3000            ; 0 - 10000
ground_bumps_angle1=8900                ; 0 - 35999 degrees
ground_bumps_intercept1=4.0
ground_bumps_slope1=0.25
ground_bumps_magnitude2=350             ; 0 - 10000
ground_bumps_angle2=9100                ; 0 - 35999 degrees
ground_bumps_intercept2=0.075
ground_bumps_slope2=0.7
crash_magnitude1=10000                  ; 0 - 10000
crash_direction1=01000                  ; 0 - 35999 degrees
crash_magnitude2=10000                  ; 0 - 10000
crash_direction2=9000                   ; 0 - 35999 degrees
crash_period2=75000                     ; in microseconds
crash_duration2=2500000                 ; in microseconds
 
[keyboard_response]
//Breakpoint speeds (knots) on the keyboard increments of control surfaces.
//Speed at which the incremenet is reduced to  1/2 and 1/8 respectively.
elevatpor = 140,  240
aileron  = 200, 1000
rudder   = 200, 1000
 
 
[Views]
eyepoint = 0.75, -1.05, 1.50
 
[CameraDefinition.001]
Title = "Right Seat"
Guid = {195EAB58-9E4A-1E2A-A34C-A8D9D948F078}
Origin = Virtual Cockpit
MomentumEffect = Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = YES
AllowZoom = TRUE
InitialZoom = 0.45
SmoothZoomTime = 2.0
ZoomPanScalar = 0.5
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0.55, 0, -0.2
InitialPbh=13, 0, 340
 
[CameraDefinition.002]
Title = "Panel"
Guid = {195EAB58-9E4A-2E2A-A34C-A8D9D948F078}
Origin = Virtual Cockpit
MomentumEffect = No
SnapPbhAdjust = None
SnapPbhReturn = False
PanPbhAdjust = None
PanPbhReturn = False
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.5
SmoothZoomTime = 2.0
ZoomPanScalar = 1
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0.26, -0.27, -0.1
InitialPbh=0, 0.0, 0.0
 
[CameraDefinition.003]
Title = "Passenger"
Guid = {0456199A-99D4-11DC-B263-66CC55D89593}
Origin = Virtual Cockpit
MomentumEffect = Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = YES
AllowZoom = TRUE
InitialZoom = 0.40
SmoothZoomTime = 2.0
ZoomPanScalar = 0.4
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0.5, 0.03, -0.82
InitialPbh=8, 0, 337
 
[CameraDefinition.0]
Title = angle view 1
Guid = {B0CA7E72-F3D9-F748-8BF5-108D197B2469}
Description = angle view 1
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.5
ShowWeather = Yes
InitialXyz = 1.5, 0.3, -4.2
InitialPbh = 5, 0, 359
XyzAdjust = TRUE
Category=Aircraft
MomentumEffect=TRUE
ClipMode=Minimum
 
[CameraDefinition.1]
Title = angle view 2
Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59}
Description = angle view 2
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.64
ShowWeather = Yes
InitialXyz =  2.7, 0.4, 7.0
InitialPbh = 5, 0, 205
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum
MomentumEffect=TRUE
 
[CameraDefinition.2]
Title = angle view 3
Guid = {3A09FD6C-D406-4d8f-A5CD-FA4F5E0C12ED}
Description = angle view 3
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.60
ShowWeather = Yes
InitialXyz = -6.45, -0.29, -0.27
InitialPbh = 0, 0, 72
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum
 
[CameraDefinition.3]
Title = "angle view 4"
Guid = {D8D67955-2E9B-4e75-9D8B-8EFFBBFAC64A}
Description = angle view 4
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.64
ShowWeather = Yes
InitialXyz = -2.6, 0.7, -8.4
InitialPbh = 10, 0, 5
XyzAdjust = TRUE
Category=Aircraft
MomentumEffect=TRUE
ClipMode=Minimum
 
[CameraDefinition.4]
Title = "angle view 5"
Guid = {f25dfa2e-fd2e-4b89-81e2-0575cbcb60de}
Description = angle view 5
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.45
ShowWeather = Yes
InitialXyz = -6.7, 0.3, 0.5
InitialPbh = 8, 0, 100
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum
 
[CameraDefinition.5]
Title = "angle view 6"
Guid = {7a91803e-898b-435a-8391-725be6a48203}
Description = angle view 6
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 0.40
ShowWeather = Yes
InitialXyz = 3.5, 2.2, -6.3
InitialPbh = 25, 0, 320
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum
MomentumEffect=TRUE
 
[CameraDefinition.6]
Title = "angle view 7"
Guid = {8A1987D0-09B6-7E48-B4E1-62C5DBE2A720}
Description =angle view 7
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom =0.49
ShowWeather = Yes
InitialXyz = -0, 1.1, 5.2
InitialPbh = 15, 0, 180
XyzAdjust = TRUE
Category=Aircraft
MomentumEffect=FALSE
ClipMode=Minimum
 
 
[CameraDefinition.7]
Title = "angle view 8"
Guid = {8A1987D0-09B6-7E48-B4E1-62C5DBE2A721}
Description =angle view 8
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom =0.70
ShowWeather = Yes
InitialXyz = -10, 2.1, 5.2
InitialPbh = 14, 0, 122
XyzAdjust = TRUE
Category=Aircraft
MomentumEffect=TRUE
ClipMode=Minimum
 
[CameraDefinition.8]
Title = "angle view 9"
Guid = {bbc3f178-c1bd-41e6-a714-a87a7e2256b6}
Description =angle view 9
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom =0.35
ShowWeather = Yes
InitialXyz = -3.2, -0.35, 2.8
InitialPbh = -3, 0, 135
XyzAdjust = TRUE
Category=Aircraft
MomentumEffect=FALSE
ClipMode=Minimum

Share this post


Link to post
Share on other sites

Superb! Couple of bits missing though;

 
[fltsim.7]
title=Alabeo C195 G-BTBJ
sim=C195
model=
panel=
sound=
texture=G-BTBJ
kb_checklists=
kb_reference=
atc_id=G-BTBJ
ui_manufacturer="Cessna"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=G-BTBJ
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1

[fltsim.8]
title=Alabeo C195 G-BBYE
sim=C195
model=
panel=
sound=
texture=G-BBYE
kb_checklists=
kb_reference=
atc_id=G-BBYE
ui_manufacturer="Cessna"
ui_type=C195 BusinessLiner
ui_typerole="Single Engine Prop"
ui_createdby="Alabeo"
ui_variation=G-BBYE
description="BusinessLiner"
atc_heavy=0
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
B)

Share this post


Link to post
Share on other sites

Wait, are those your repaints? Or am I missing [fltsim.7] and [fltsim.8]?

 

 Please link me if you've got repaints!

Share this post


Link to post
Share on other sites

Let's put it like this, you're not 'missing' 7 and 8. I advertise my wares in the screenshot forum. The rest is up to you. You may not like them! :smile:

Share this post


Link to post
Share on other sites

Let's put it like this, you're not 'missing' 7 and 8. I advertise my wares in the screenshot forum. The rest is up to you. You may not like them! :smile:

Short of going stupid....  Where do I find this "screenshot forum" you speak of Ron, so I can see your handy work?

 

Cheers.

 

Tim...

Share this post


Link to post
Share on other sites