OA Temp XML

[arnoaksu 8]

Hi

 

I was working on my ilyushin panel whats the wrong my xml its not working truly ?

 

<Gauge Name="Outside Air Temperature" Version="1.0">
   <Image Name="caredrogba.bmp" ImageSizes="200,200" Luminous="Yes"/>
   <Element>
      <Position X="100" Y="100"/>
      <Image Name="ned1.bmp" Luminous="Yes" PointsTo="EAST" ImageSizes="34,7">
         <Axis X="65" Y="48"/>
      </Image>
      <Rotate>
         <Value Minimum="0" Maximum="65">(A:GENERAL ENG1 OIL TEMPERATURE, celsius)</Value>
           <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="0"/>
            </Failures>      
            <Nonlinearity>
            <Item Value="0" X="60" Y="150"/>
            <Item Value="5" X="71" Y="141"/>
            <Item Value="10" X="78" Y="133"/>
            <Item Value="15" X="46" Y="8"/>
            <Item Value="20" X="65" Y="21"/>
            <Item Value="25" X="71" Y="43"/>
            <Item Value="30" X="91" Y="115"/>
            <Item Value="35" X="94" Y="110"/>
            <Item Value="40" X="94" Y="105"/>
            <Item Value="45" X="93" Y="98"/>
            <Item Value="50" X="94" Y="94"/>
            <Item Value="55" X="94" Y="86"/>
            <Item Value="60" X="89" Y="77"/>
            <Item Value="65" X="65" Y="48"/>
         </Nonlinearity>
         <Delay DegreesPerSecond="10"/>
      </Rotate>
   </Element>

<Element>
 <Position X="100" Y="100"/>
      <Image Name="ned2.bmp" Luminous="Yes" PointsTo="WEST" ImageSize="34,7">
         <Axis X="-25" Y="5"/>
      </Image>
      <Rotate>
         <Value Minimum="0" Maximum="65">(A:GENERAL ENG4 OIL TEMPERATURE, celsius)</Value>
          <Failures>
            <SYSTEM_ELECTRICAL_PANELS Action="0"/>
            </Failures> 
            <Nonlinearity>
            <Item Value="0" X="60" Y="150"/>
            <Item Value="5" X="71" Y="141"/>
            <Item Value="10" X="78" Y="133"/>
            <Item Value="15" X="46" Y="8"/>
            <Item Value="20" X="65" Y="21"/>
            <Item Value="25" X="71" Y="43"/>
            <Item Value="30" X="91" Y="115"/>
            <Item Value="35" X="94" Y="110"/>
            <Item Value="40" X="94" Y="105"/>
            <Item Value="45" X="93" Y="98"/>
            <Item Value="50" X="94" Y="94"/>
            <Item Value="55" X="94" Y="86"/>
            <Item Value="60" X="89" Y="77"/>
            <Item Value="65" X="65" Y="48"/>
         </Nonlinearity>
         <Delay DegreesPerSecond="10"/>
      </Rotate>
     </Element>     
</Gauge>

[Propwash 2]

Check that Axis and Position of your needles are correct.  The attached pic, Gauge - Rotating Needle.jpg, will help:

 

https://drive.google.com/#folders/0Bzp20cxkeu7iNEVoZTlMNjZpMTg

 

Then, have a look at the Fuel Quantity gauge in that folder.  Its similar in construction to your OA Temp gauge.

 

Bob

[arnoaksu 8]

Bob thanks for reply but attc pic its not showing link give me error should like this unable to acces folder ?

[Propwash 2]

hmmmmm ... undoubtedly an error on my part ... give me a few mins ...

 

See if that works .........

my prob ... never used Google Drive before

 

https://drive.google.com/#folders/0Bzp20cxkeu7iNEVoZTlMNjZpMTg

[Propwash 2]

Honestly, I dont know how to attach pics since AVSIM changed their rules, and if you cannot get into the Google Drive folder that I set up with the files for this response, then I cannot help... at least, not in AVSIM.  If you post the question at FSDeveloper.com gauges forum, I can help there

 

If I knew how you attached your pic, I would do the same...  AVSIM ... I dunno

[arnoaksu 8]

Thanks i started a new thread in fsdeveloper.