[old] LINDA 2.0 Released

[ScotFlieger 280]

LINDA 2.0.8 Update

 

With the release of the new Aerosoft Airbus A318/319 there is a need to change the name of the module used with the Aerosoft Airbus.  There is also a missing module from the formal 2.0 release - namely actions.lau with the version number 2.5b10.

 

The revised installation is available here and the updated notes for 2.0.8 are here.

 

If you are already using Version 2.0 with the VRInsight FCU panel and wish to use it with the new Aerosoft Airbus A318/A319 aircraft then the following changes are sufficient:

1. Open LINDA 2.0 and go to the settings page.
2. In the drop down list, select Aerosoft Airbus X. Deselect FSX sync first.
3. Click on Edit.
4. Change the Module Name and Aircraft Search String to 'Aerosoft Airbus'. You should see all the Aerosoft Airbus models listed.
5. Click on Edit to save new settings.

Please note that the Airbus A318/319 module 3.0.1 does not work with the Airbus FCU. I will be carrying out further work to improve compatibility.

 

Any problems or issues should be posted on this thread.

[Ber759 0]

Hi,

on Tuesday I get my MCP Combo Airbus type (FCU Combo), but I do not understand how I have to configure Linda for the Airbus A318/19. Can I use the Version you have linked above ?

Do I need to install the original driver from VRinsight?

Can you give me maybe explain step by step how I linda must configure for the a319 and the MCP Combo Airbus type?

 

Sorry for my bad english and the many questions.

[ScotFlieger 280]

Hi Ber759

 

Can you check what versions of LINDA and the Airbus modules you are using? See Set up page.

 

The only drivers you need from VRInsight are VRiSIM.exe and the USB serial drivers. However, if you have FSX &  LINDA communicating with your Airbus FCU then I can only assume that you have these installed.

 

Andrew

[Ber759 0]

Hi,

 

I download Linda from the link above and put the flies in the modules Folder from Fsx, that's all. Do I need something else?

More I could not test because the panel until Tuesday arrives.

 

Sorry, I'm working for the first time with linda.

 

Greetings from germany

[ScotFlieger 280]

Liebe Ber759

 

You need to go to the VRinsight webpage (http://www.vrinsight.com/devel_shot/) and download the Install Base Package VRiSim and install (VRiSim.exe and USB-serial drivers).

 

You will also need the latest version of FSUIPC 4.936 (free or fully licenced) which is essential for LINDA to communicate with FSX and Airbus.

 

When you try you FCU for the first time, first FCU to your computer before starting LINDA and then FSX. There is an option for LINDA to start automatically with FSX starts. You will need to go the LINDA settings page to select the COM Port for your panel.  

 

If you have any problems, PM me.

 

Mit freundlich Grüssen

 

Andrew

[Andydigital 93]

FSUIPC needs to be registered for LINDA to be able to work, that isn't optional.

[Ber759 0]

Thanks for help !

And the Link with the download above is the right Version of Linda ?

I put this files in my modules folder and and make my settings with Linda ?!?

Tomorrow when the hardware is delivered I'll try it out.

I will contact you again if there are any problems. Thanks !

[Ber759 0]

Hi Ber759

 

Can you check what versions of LINDA and the Airbus modules you are using? See Set up page.

 

in the MCP Combo Tab i see :

 

Modul : Aersosoft Airbus x + Extended

Version : 2.5b10Rc0

------

Linda Version 2.0.7

 

 

[ScotFlieger 280]

in the MCP Combo Tab i see :

 

Modul : Aersosoft Airbus x + Extended

Version : 2.5b10Rc0

------

Linda Version 2.0.7

 

 

That is correct.

[Rimax 0]

Hi Andrew.

Can't download Linda 2.0 from Dropbox. I get a return of 404 Error.

Is there any other way to get this application?.

 

Thank you very much

Hi again.

Finally I got the download of Linda 2.0.8 update directly from the web. Thanks

[ScotFlieger 280]

 

 

Hi again.
Finally I got the download of Linda 2.0.8 update directly from the web. Thanks

 

There was a missing file in the original so it was removed. The correct one is 2.0.8 as you found.

[jnlcdum 0]

HI Scot,

Your link to download a 2.0.7. is bad on IE I have an error 404 to this page :

- https://dl.dropboxusercontent.com/u/9205114/linda2airbus/Linda2Release/LINDA%202.00%20Release.zip

 

on Firefox , I am coming on this page :

- https://fr.search.yahoo.com/yhs/errorhandler?hsimp=yhse-001&hspart=CND&type=A435D7A49339E4A288AF_s11_g_e&q=https://dl.dropboxusercontent.com/u/9205114/linda2airbus/Linda2Release/LINDA%202.00%20Release.zip

Have you solution for this ?

 

Thank you for service.

 

Best regards

 

FCY-DML

Hello Scot,

 

Sorry, but I have donwloading with a new link for 2.0.8. But is not good solution for me, this version is not compatible with my MCP is a first version.

 

Thank's

 

Bye

[ScotFlieger 280]

Hi Jnlcdum

 

Sorry you had a problem. LINDA 2.0.8 is the current version but has only been tested with MCP2 (Boeing) and MCP2a (Airbus FCU). MCP1 users are recommended to stay with LINDA 1.13.

 

I am looking for MCP1 beta testers for LINDA 2.1. Would you be interested?

[SpikeHopkins 0]

I continue to get a Dropbox 404 error when attempting to open the Zip link.

[ScotFlieger 280]

Spike

 

Sorry I had to break the previous kink. The latest download can be found at the top of this page. The current version is 2.0.8 which includes a missing but important file. Watch this space for v2.1.