Jump to content
Sign in to follow this  
Raufvogel

APP doesn't work EDDL 05L to EDDF ILS 25L 110.70

Recommended Posts

Flight Dusseldorf EDDL 05L to Frankfurt EDDF ILS 25L IFSW 110.70  (ILS 25R IFNW 109.50)
during the interception for 25L couldn't  APP switch on.
Found in NAV/RAD not the right ILS 110.70? 

Used Route:  EDDL COL T150 ROLIS EDDF used after entering ILS 25L in APPROACHES  Transition MTR

 

Wanted to know/learn if PMDG knows the right ILS code, can't see the right ILS 25L 110.70 in NAV/RAD, have doing wrong something?

pKQA6.png
 
like to know if PRESELECT (i've entered) on L6 can do something on it? 
 
WMNq1.png

Share this post


Link to post
Share on other sites

 

 


Wanted to know/learn if PMDG knows the right ILS code, can't see the right ILS 25L 110.70 in NAV/RAD, have doing wrong something?

 

Unless you've updated your scenery to match the new frequency, it's not going to work correctly.

 

Either update the frequency by downloading a new BGL for the airport (commonly incorrectly referred to as an AFCAD), or change the data in your Navdata to reflect the old frequency.


Kyle Rodgers

Share this post


Link to post
Share on other sites

Thank you Kyle, it's difficult to understand your answer for me, i send the most important screenshots to learn of my mistakes pls.

iutBd.png

 
fKYGl.png

 

 QmUp8.png

Share this post


Link to post
Share on other sites

Either update the frequency by downloading a new BGL for the airport (commonly incorrectly referred to as an AFCAD), or change the data in your Navdata to reflect the old frequency.

 

Hi Kyle,

as in "the other thread": IMO it would be nice for the clients to choose between FSX and RW (AIRAC) data usage in the PMDG FMCs.

Here is the concerned EDDF data excerpt of the PMDG ARPT_RWY data reflecting the immense changes of RWYs and their frequencies:

AP;EDDF;FRANKFURT/MAIN          ;50.033306;8.570456;329

RW;07C;50.032617;8.534631;329;11055;068;068;13123

RW;07L;50.037056;8.497078;305;11030;068;068;9186

RW;07L;50.037056;8.497078;305;11175;068;068;9186

RW;07R;50.027542;8.534175;328;11095;068;068;13123

RW;18;50.034169;8.525931;326;0;178;178;13123

RW;25C;50.045128;8.586981;364;11155;248;248;13123

RW;25L;50.040053;8.586531;362;11115;248;248;13123

RW;25R;50.045825;8.533717;353;11135;248;248;9186

RW;25R;50.045825;8.533717;353;10975;248;248;9186

FS;07L;50.032612;8.534585;364;11010;069;069;13099

FS;07R;50.027508;8.533969;364;11095;069;069;13102

FS;18;50.034420;8.525881;364;0;179;179;13123

FS;25L;50.040020;8.586417;364;11070;249;249;13102

FS;25R;50.045124;8.587026;364;10950;249;249;13099

FS;26L;50.035343;8.566838;364;11135;249;249;8202

 

(BTW: the PMDG FMC RWY database file has "doublets" for 07L/25R RWYs with differing frequencies !?)

RWYs 07L and 25R are newly built. RWYs 07C and 25C are the former 07L/25R. 07R/25L remained physically unchanged. The only ILS frequency unchanged is the one for 07R...

 

So from a clients point of view it would be very nice to have a little tool (perhaps inside the "PMDG Operations Center") in which you can chose which RWY data the FMCs will use. A complier that extracts the respective lines to an either/or database should not be too complicated to build.

 

Greetings,

Claus

Share this post


Link to post
Share on other sites

Thank you Claus, descent for an approach on Nürnberg EDDN ILSZ28 INUW 109.10 the same case i think

Share this post


Link to post
Share on other sites

 

 


Thank you Claus, descent for an approach on Nürnberg EDDN ILSZ28 INUW 109.10 the same case i think

Yes. PMDG ARPT_RWY.dat excerpt:

AP;EDDN;NURNBERG                ;49.498700;11.078008;1022
RW;10;49.500550;11.059169;1022;11130;097;097;8858
RW;28;49.496925;11.096025;1046;11175;277;277;8858
RW;28;49.496925;11.096025;1046;10910;277;277;8858
FS;10;49.500549;11.059137;1046;11130;098;098;8841
FS;28;49.496925;11.096058;1046;10910;278;278;8841

 

There again is a "doublet" frequency, here for RW RWY28. The second one seems not to used by the FMC as it would have matched the (old) FS frequency...

 

Probably PMDG staff follows this thread and they can give us an opinion our outlook on this subject.

 

Greetings,

Claus

Share this post


Link to post
Share on other sites

 

 


Probably PMDG staff follows this thread and they can give us an opinion our outlook on this subject.

 

I still don't see the point of what you're asking - either use RW data, or don't update your nav data.  As was pointed out in the other thread, you can easily install the old AIRAC and remain in the past (and save money in the process by not having to update).  If you want to update your navdata, you'll have to update the sim.  It's truly a small "price" to pay.  Not sure why you'd want to shift that burden unnecessarily onto the developers, requiring them to program something in to handle the handful of people who want to be only half up-to-date.

 

Keep up with the real world; or

Don't.

 

This in between business makes no sense.

 

In any case, if you really want their attention, submit a ticket.  They don't always see every topic.  This is a community support forum, not official support.


Kyle Rodgers

Share this post


Link to post
Share on other sites

Is it difficult to find/buy and install those airacs, i'have read about navigraph, and they will be usable for all plane's in FMC i think...

Share this post


Link to post
Share on other sites

I still don't see the point of what you're asking - either use RW data, or don't update your nav data.

Yes, I agree with either or. But wouldn't it be nice to have the choice to say "FMC RWY data is out of the box compatible to a fresh FS installation"? So no matter which FS (FSX, P3D, XP10) one uses: after the installation there is no problem with FMC RWY-designator or ILS/LOC-frequency or even physical-presence of RWYs anymore...

So this would be a good solution for users like Jaap who just want the FMC in sync with their sim without having to update frequently...

But I also see your point, that it is important to have a common up to date world for e.g. VATSIM...

 

So, as I said, choosing between FMC using newest AIRAC data OR "old" FS data would be IMO a good feature.

 

 

 

Is it difficult to find/buy and install those airacs, i'have read about navigraph, and they will be usable for all plane's in FMC i think...

It is not so difficult. The question IMO is what you are planning to do. If you want to fly absolute realistic up to date routes to up to date airports and all that eventually on e.g. VATSIM, than you "must" update.

But if you just want to fly "your" routes to FS airports with flightplans made by FSX (or an external flight planner like FSC) using the "old" database, than you do not need an update. Unfortunately the FMC data provided by e.g. PMDG is set to "up to date" AIRACs.

And this is my point here: why not giving the customer the choice to choose between the two options?

 

Greetings,

Claus

Share this post


Link to post
Share on other sites

Thank you Claus, a bit dangerous to think about something I do not understand, why doesn't commercial company FMC use this opportunities, possibility to switch for FMC users with updated AIRAC data, or for the old FS data   :mellow:

Share this post


Link to post
Share on other sites

I've bought a single Navigraph AIRAC cycle in my life, downloaded it in all the formats needed for my different addon planes (and for VoxATC) at once, carefully backed up all these downloads to an external medium, and have been a happy simmer since.

 

Now all my planes use the same navigation database that VoxATC uses, and no matter how aged this database will look some day, it will still give me consistent data across all my addons.   B)

Share this post


Link to post
Share on other sites

Thank you Claus, a bit dangerous to think about something I do not understand, why doesn't commercial company FMC use this opportunities, possibility to switch for FMC users with updated AIRAC data, or for the old FS data   :mellow:

Because planet Earth was a different place to live and fly back in 2006. Here's the problem: As soon as you install the first airport addon you lose the compatibility with that old database and your FSX becomes hybrid of old and new infrastructure (new airport scenery has different runways, ILS freqs, SID/STARS... and you try to combine it with old airways and enroute fixes - that simply doesn't work).

Share this post


Link to post
Share on other sites

I'm sorry, abbreviation failure of me, must be, why commercial company Flightsim Commander doesn't use this possibility to switch for FMC users with updated AIRAC data, or for the old FS data. 

Share this post


Link to post
Share on other sites

Hello all,

 

I agree with Kyle's summary that you have 2 main choices. Why make it more difficult for yourself by inventing an intermediate solution. The two options are quite clear. One can argue the merits of why flightsim developers select a particular strategy but it is what it is.

 

In reference to the doublet ILS approaches, Frankfurt has introduced an additional ILS/glideslope for the Northwest runway. The typical Glide Path is 3 deg however the secondary ILS signal has a GP of 3.2 deg. Flying either ILS approach is your decision based on agreement with ATC.

 

If you wish to fly these multiple ILS then as mentioned, updating your airport to one of the latest add-on sceneries that has these ILS updates would make most sense and the accompanying AIRAC for whatever aircraft you are flying. I would recommend you check the airport package readme instructions to determine if these are supported. Not every EDDF package or updated AFCAD supports them.

 

If you really want to fly in the "old world" then for EDDF I think you're stuck with the default FSX airport I am afraid.

 

The purchase of a single AIRAC cycle from Navigraph is very straightforward. Create an account , select the FMS data for the current cycle, enter your payment details and download the relevant package(s) for your aircraft fleet. I think current price is ~6Euros for one cycle and you can download all AIRACS for all aircraft that are supported by Navigraph. Remember this gives you latest info on all airports across the world.

 

 

Regards,


Spoiler

System specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttle
Now built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus TUF Gaming RTX3070 OC 8Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator 34p 3440x1440p

Mark Aldridge
P3D v5.3 HF2, P3Dv4.5 and sometimes FSX!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...