Problem with flight plan

[bukeyolacan 24]

I was trying to do a flight from LTBA to LTFG. While planning the fligh I always use FSCommander for PMDG 737. LTFG has ILS landing in runway 08 but after going through the final VOR, there is no STAR that I can choose. I tried to manually set heading according to ATC then LOC worked and plane aligned with the runway but APP doesn't work and it keeps the plane in a hold altitude and doesn't descent. Either there is a problem with the ILS of the airport as its freeware or I am doing something wrong. I would like to know if its related with me. Thanks.

[Daveo 36]

Which AFCAD are you using?

[Don t moderate me this way 882]

Danny ( ) Büke,

 

did you see a glideslope indication on the PFD, and could it be, you might have been a little too high for the G/S, so APP didn't capture it?

[bukeyolacan 24]

Which AFCAD are you using?

I am using AFCAD included in freeware

 

Danny ( ) Büke,

 

did you see a glideslope indication on the PFD, and could it be, you might have been a little too high for the G/S, so APP didn't capture it?

I saw the localizer capture but didn't see any glideslope diamond but I was at 2200ft which is the last ATC told me to descend.

[Don t moderate me this way 882]

Büke, looks like there's a LOC only approach available with NO glideslope:

http://charts.navigraph.com/apt/LTFG.html

 

So you would have to descent in VNAV.

[PIC007 82]

 

 

So you would have to descent in VNAV.

 

Or heaven forbid, manually fly the approach!  :blink:

[bukeyolacan 24]

Büke, looks like there's a LOC only approach available with NO glideslope:

http://charts.navigraph.com/apt/LTFG.html

 

So you would have to descent in VNAV.

Thanks, but i have no idea how to descent manually in VNAV? I mean how can I know which altitude should i get in which distance etc.

 

Or heaven forbid, manually fly the approach!  :blink:

Tried, no luck

[Don t moderate me this way 882]

You can select an RNAV approach in the CDU, Büke.

[PIC007 82]

 

 

I mean how can I know which altitude should i get in which distance etc.

 

Get the approach plate, it will tell you all you need to know

[bukeyolacan 24]

You can select an RNAV approach in the CDU, Büke.

Can you explain more in detail or send PM? Thanks

[Don t moderate me this way 882]

For a start, just take a look (again) at the NGX tutorial no. 2: It features an approach into Innsbruck (LOWI). Most of the approach in the tutorial is done in VNAV (up to a certain point anyway).

 

See the preflighting for the approach (CDU), starting on p. 28,

and the approach phase, starting on p. 109.

 

Your approach will be much easier, because you don't need the visual approach, no circling to land, and you can replace LNAV by LOC, as soon as you receive the LOC frequency at LTFG.