July 13, 201411 yr Hi I tried finding the solution for the issue described below but did not find any solution/ topic on this issue pls help me I am using Linda since one month and assigned the keys to various aircraft's successfully but when i am doing the assignment with PMDG 777 it gives me the error " "[E] *** LUA Error: cannot open linda-cfg/aircrafts/PMDG 777/config-mcp.lua: No such file or directory" After this no button works and i have to restart the fsx then it works fine when i start fsx again and all the keys i have assigned works as well some times this error comes up after one assignment some time after 2 and some times after 3 but all these assignments works fine when i start fsx again I have no MCP combo so its already disbaled in settings and below is the log when linda starts in console HID Device changed ********* FSUIPC4, Version 4.929 by Pete Dowson ********* Reading options from "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=5DCC0000 User Name="-------" User Addr="----------------" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired System time = 13/07/2014 15:04:04 FLT path = "C:\Users\---\Documents\Flight Simulator X Files\" Trying to connect to SimConnect Acc/SP2 Oct07 ... FS path = "D:\Microsoft Games\Microsoft Flight Simulator X\" Run: "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\linda.exe" LogOptions=40000000 00000001 SIM1 Frictions access gained [E] VRI port 1 "com3" failed to open Wind smoothing fix is fully installed G3D.DLL fix attempt installed ok SimConnect_Open succeeded: waiting to check version okay Trying to use SimConnect Acc/SP2 Oct07 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) Initialising SimConnect data requests now FSUIPC Menu entry added D:\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT D:\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR --- NEW LOGGING SESSION ----------- D:\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG 777-200LR\B777-200LR.AIR KEYDOWN: VK=65, Waiting=0, Repeat=N, Shifts=0 .. Key not programmed -- passed on to FS KEYUP: VK=65, Waiting=0 System time = 13/07/2014 15:06:38, Simulator time = 14:49:15 (10:49Z) Aircraft="PMDG 777-240LR Pakistan International Airlines - PIA" Weather Mode now = Theme Starting everything now ... LUA.0: beginning "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" LUA.0: ended "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua" LUA.1: beginning "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\linda.lua" LUA.1: LUA.1: [iNIT] Loading... LUA.1: Aircraft: PMDG 777-240LR Pakistan Internation LUA.1: Aircraft module detected: PMDG 777 LUA.0: beginning "D:\Microsoft Games\Microsoft Flight Simulator X\Modules\linda/system/init.lua" LUA.0: AivlaSoft library loaded... LUA.0: FSX standard library loaded... LUA.0: IVAO library loaded... LUA.0: RealityXP library loaded... LUA.0: Weather library loaded... LUA.0: A2A MAP library loaded... FS Control Sent: Ctrl=69822, Param=64 LUA.0: Loading a fallback joysticks config... LUA.0: Loading PMDG 777 joysticks config... LUA.0: Module: PMDG 777 Started... LUA.0: Ready to go, Captain! LUA.0: LUA.0: LVars watching list cleared... LUA.0: Offsets watching list cleared! Advanced Weather Interface Enabled FS Control Sent: Ctrl=65615, Param=0 FS Control Sent: Ctrl=65615, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=65607, Param=0 FS Control Sent: Ctrl=69834, Param=64 FS Control Sent: Ctrl=65861, Param=536870912 FS Control Sent: Ctrl=65861, Param=536870912 FS Control Sent: Ctrl=65861, Param=536870912 FS Control Sent: Ctrl=65861, Param=536870912 FS Control Sent: Ctrl=65861, Param=536870912 FS Control Sent: Ctrl=69834, Param=64 FS Control Sent: Ctrl=69862, Param=64 FS Control Sent: Ctrl=69834, Param=64 FS Control Sent: Ctrl=69862, Param=64 [E] *** LUA Error: cannot open linda-cfg/aircrafts/PMDG 777/config-mcp.lua: No such file or directory at this point i was assigning the key and when saved i got this message thx AA Adil Akram
July 13, 201411 yr Open the fsuipc4.ini file and find the section called [VRinsight] and delete it and the line or two after it starting with Com=. I know you say you disabled it but according to the FSUIPC log it said this "[E] VRI port 1 "com3" failed to open" that means its not actually properly disabled, doing the above in the opening sentence should solve that issue. Cheers, Andy.
July 13, 201411 yr Alternatively, simply go to the Combo MCP set up page in LINDA and uncheck the Enabled box. Andrew Gransden Scotland, UK LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew
July 13, 201411 yr I presume he had already done that, as the OP did say it was disabled, both in bold and underlined . Linda isn't the most stable program and I have heard on more than one occasion that the tick is removed from the MCP enable box and yet it continues to act as if VRi support is enabled. Removing the section mentioned from the FSUIPC4.ini as advised is the only way to 100% guarantee it being disabled it seems. At least that was the case in 1.13 and earlier, I've still not upgraded to Linda 2 yet as I go by the philosophy, if it ain't broke, don't fix it. I don't use my FCU and I am actually considering selling it now that VRinsight no longer want my services. I've got a mint MCP1 as well with a brand new PCB in it that has less than a hour of use on it, that will probably be sold too. Cheers, Andy.
July 13, 201411 yr if it ain't broke, don't fix it. Too true. Andrew Gransden Scotland, UK LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew
July 16, 201411 yr Author Thank you very much for your help. I really appreciate As Andy mentioned that this program is not very stable and I think he is right coz I setup my throttle buttons to work as altitude up and down and Vs has been setup as well for this purpose and many times it happens if I press button to dec/ inc altitude it keeps on changing the numbers after release until I press other button I am sure its not the hardware coz out of fsx they work absolutely fine. Adil Akram
July 16, 201411 yr For repeating functions like those you are using and things like trim, you are better using FSUIPC directly as even the Linda (1) developer (Artem) advises you to do this. Linda doesn't handle fast repeating functions so good. Cheers, Andy.
July 17, 201411 yr Author Many thanks and I ll try to configure these controls with fsuipc Adil Akram
Create an account or sign in to comment