Traffic Optimizer for P3D

[Ray Proudfoot 8,926]

Many thanks Duke. :smile:

[Gregg_Seipp 565]

Thanks again Duke.  Giving any thoughts to the boats idea?

[dukeav 46]

Thanks again Duke.  Giving any thoughts to the boats idea?

 

I need to experiment if boat traffic volume affects much. Then, yes.

[Gregg_Seipp 565]

I did a little test and, flying the Turbine Duke up around Seattle with boat traffic turned off I was getting between 33-47 FPS...averaging around 38.

 

With boat traffic at 100% I was getting between 23 and 33...averaging about 28.

 

Gregg

[dukeav 46]

I did a little test and, flying the Turbine Duke up around Seattle with boat traffic turned off I was getting between 33-47 FPS...averaging around 38.

 

With boat traffic at 100% I was getting between 23 and 33...averaging about 28.

 

Gregg

 

So that's same as aircraft. Let me work on it then...

[dukeav 46]

Here's a new work-in-progress version with a radar display for traffic watchers:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

Click the Radar button to display the radar. You can alter the scale using the combo. The radar will update after the optimize cycle runs, so every minute if the optimize is checked. Blue is you, green is AI active and red AI deleted in last cycle. Radar is always north oriented.

[DylanM 1,069]

You sir are a scholar and a gentleman!  

[dukeav 46]

New radar version with option to display map:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

[dukeav 46]

Here's a radar update:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

1. Shows each Aircraft's Gate/Runway and state

2. Options to filter aircraft based on state

 

[simmerhead 885]

Thank you very much for this excellent tool! Just tried it for the first time and it worked superbly! Did a 4,5 hrs flight in ORBX Australia from Sydney to Darwin with live weather and very high graphics settings. Limited traffic to 50 and the airports looked alive and well.

 

Hope this gets intergrated into P3D somehow. I'm sure this is the sort of algorithms that can help reduce VAS.

 

I run a setup with 1000+ traffic bgls, and finally I can run all my custom traffic at once without a sweat.

[reibi 0]

Hi,

 

you shold think about version Numbers ;-)

Anyway, great work

[reibi 0]

...but it is not running on my rig.

Haswell i5

Nvidia 760 4GB

16 GB RAM

Win 8.1 64 bit

 

The EventManager reports the follwing (2 errors, in german):

 

1st

 

Anwendung: AirTrafficManager.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.InvalidOperationException
Stapel:
   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   bei AirTrafficManager.My.MyApplication.Main(System.String[])
 

2nd

 

Name der fehlerhaften Anwendung: AirTrafficManager.exe, Version: 1.6.0.0, Zeitstempel: 0x544bdab6
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xb1c
Startzeit der fehlerhaften Anwendung: 0x01cff0b97347f445
Pfad der fehlerhaften Anwendung: L:\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: b111e288-5cac-11e4-bf51-d850e63f6ce7
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

 

 

Hey, there is an VerNr. Plese add this to the filename to download.

[reibi 0]

I'm using P3d v2.4 (of course ;-)

[dukeav 46]

I'm using P3d v2.4 (of course ;-)

Can you try this:

 

 

Also try installing Simconnect again, look in the "redist" folder under where P3D is installed. Then look for simconnect.msi under FSX-RTM, FSX-SP1 and FSX-SP2-XPACK folders. Install all three from these folders.

[reibi 0]

"Can you try this: "   

 

what?

 

I have even more installed all 3 versions again.

Make a reboot each time and try your Software,

but is's still throwing the same error as above

 

Anwendung: AirTrafficManager.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.InvalidOperationException
Stapel:
   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   bei AirTrafficManager.My.MyApplication.Main(System.String[])
 

Name der fehlerhaften Anwendung: AirTrafficManager.exe, Version: 1.6.0.0, Zeitstempel: 0x544bdab6
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0x14b8
Startzeit der fehlerhaften Anwendung: 0x01cff0cd4cb5a6a6
Pfad der fehlerhaften Anwendung: L:\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 8a7d4a73-5cc0-11e4-bf54-d850e63f6ce7
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist: