Traffic Optimizer for P3D

[dukeav 46]

"Can you try this: "   

 

what?

 

I have even more installed all 3 versions again.

Make a reboot each time and try your Software,

but is's still throwing the same error as above

 

Anwendung: AirTrafficManager.exe

Frameworkversion: v4.0.30319

Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.

Ausnahmeinformationen: System.InvalidOperationException

Stapel:

   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])

   bei AirTrafficManager.My.MyApplication.Main(System.String[])

 

Name der fehlerhaften Anwendung: AirTrafficManager.exe, Version: 1.6.0.0, Zeitstempel: 0x544bdab6

Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460

Ausnahmecode: 0xe0434352

Fehleroffset: 0x00012f71

ID des fehlerhaften Prozesses: 0x14b8

Startzeit der fehlerhaften Anwendung: 0x01cff0cd4cb5a6a6

Pfad der fehlerhaften Anwendung: L:\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe

Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll

Berichtskennung: 8a7d4a73-5cc0-11e4-bf54-d850e63f6ce7

Vollständiger Name des fehlerhaften Pakets:

Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Ok. How about installing .Net framework 4.5?

[reibi 0]

it should be integratet in win 8.1.

But, why not, i will try this too.

I thought as much.

NET 4.5 is already installed.

[BimmerCop 332]

Sorry if it has been asked before but I am currently on mobile and can't find the search this forum box...

 

Is it possible to set the AI's taxi speed with this program as well? AI aircraft just crawl to their gates/runways. I am on P3D, FWIW.

 

Thanks!

[jabloomf1230 2,445]

 

 

Here's a radar update:
 
http://www.mediafire...X-P3D_Radar.zip
 
1. Shows each Aircraft's Gate/Runway and state
2. Options to filter aircraft based on state

 

It just crashes for me and never shows the UI window in Win 8.1 with P3d 2.4. Previous non-radar versions work fine.

Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ComponentModel.Win32Exception
Stack:
   at System.Windows.Forms.NativeWindow.CreateHandle(System.Windows.Forms.CreateParams)
   at System.Windows.Forms.Control.CreateHandle()
   at System.Windows.Forms.Control.get_Handle()
   at System.Windows.Forms.Control.CreateGraphicsInternal()
   at System.Windows.Forms.ThreadExceptionDialog..ctor(System.Exception)
   at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
   at System.Windows.Forms.Control.WndProcException(System.Exception)
   at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Environment._Exit(Int32)
   at System.Environment.Exit(Int32)
   at Microsoft.VisualBasic.CompilerServices.ProjectData.EndApp()
   at AirTrafficManager.Main.p3d_simconnect_OnRecvQuit(Microsoft.FlightSimulator.SimConnect.SimConnect, Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.raise_OnRecvQuit(Microsoft.FlightSimulator.SimConnect.SimConnect, Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.OnReceiveMessage(Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV, UInt32)
   at <Module>.Microsoft.FlightSimulator.SimConnect.CSignalProcDelegateMarshaler.CallSignalProc(SIMCONNECT_RECV*, UInt32, Void*)
   at <Module>.SimConnect_CallDispatch(Void*, Void (SIMCONNECT_RECV*, UInt32, Void*), Void*)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.ReceiveDispatch(Microsoft.FlightSimulator.SimConnect.SignalProcDelegate)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.ReceiveMessage()
   at AirTrafficManager.Main.DefWndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.ScrollableControl.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Form.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
   at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application.Run(System.Windows.Forms.ApplicationContext)
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   at AirTrafficManager.My.MyApplication.Main(System.String[])

Faulting application name: AirTrafficManager.exe, version: 1.4.0.0, time stamp: 0x544a3fd9
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17278, time stamp: 0x53eeb460
Exception code: 0xe0434352
Fault offset: 0x00012f71
Faulting process id: 0x1838
Faulting application start time: 0x01cff249231f0de5
Faulting application path: G:\Program Files (x86)\AirTrafficManager\AirTrafficManager.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: 25c96f1f-5e4f-11e4-8187-001fbc02953f
Faulting package full name: 
Faulting package-relative application ID: 

[dukeav 46]

 

It just crashes for me and never shows the UI window in Win 8.1 with P3d 2.4. Previous non-radar versions work fine.

 

 This log indicates that its 1.4 of ATM, that's the non-radar version, and I see the link is wrong. Can you try this link:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

Its 1.6.

Sorry if it has been asked before but I am currently on mobile and can't find the search this forum box...

 

Is it possible to set the AI's taxi speed with this program as well? AI aircraft just crawl to their gates/runways. I am on P3D, FWIW.

 

Thanks!

 

I don't know whether this can be done. I'll check sometime.

[BimmerCop 332]

This log indicates that its 1.4 of ATM, that's the non-radar version, and I see the link is wrong. Can you try this link:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

Its 1.6.

 

I don't know whether this can be done. I'll check sometime.

Thanks for checking!

[jabloomf1230 2,445]

Oops, copied wrong event from the log:

Faulting application name: AirTrafficManager.exe, version: 1.6.0.0, time stamp: 0x544bdab6
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17278, time stamp: 0x53eeb460
Exception code: 0xe0434352
Fault offset: 0x00012f71
Faulting process id: 0xd10
Faulting application start time: 0x01cff2e52e114cba
Faulting application path: G:\Program Files (x86)\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: 6bf9e89a-5ed8-11e4-8188-001fbc02953f
Faulting package full name: 
Faulting package-relative application ID: 

Application: AirTrafficManager.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.InvalidOperationException
Stack:
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   at AirTrafficManager.My.MyApplication.Main(System.String[])

That previous error was generated  when closing P3d 2.4 with version 1.4.

[Gregg_Seipp 565]

This may sound like an odd request, but I wish it would have a button to blast all aircraft landing or taking off from the opposite direction runway I'm using.  It's been happening a fair amount since I've been able to up my traffic.

[dukeav 46]

Here is the next radar version:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

1. Maps are from MapQuest/OSM.

2. The map tiles are cached in the tile_cache folder, it will keep growing for now. Will have cleanup strategy in next release. Please empty it if required.

3. Remember, the radar updates once optimize starts, so give it a minute to refresh.

 

4. Also this version has better support to troubleshoot startup errors. If there is startup problem, you will get a message dialog. Please paste it here.

 

[jabloomf1230 2,445]

Thank's that Radar version works perfectly. It starts off on a tight scale, so that had me baffled for a second. :-)

[reibi 0]

Yeah, this version works for me too.

[dukeav 46]

Thank's that Radar version works perfectly. It starts off on a tight scale, so that had me baffled for a second. :-)

 

 

Yeah, this version works for me too.

 

I add trouble shooting code and troubles go away!

[Rusty107 0]

Hi

 

This is a great little utility many thanks for all the hard work!

 

Any idea if there is an update on using this accross a network, re your earlier comments?

 

 

This one reads departure and destinations from your flight plan. This version will work both FSX and P3D. If you are running across the network then flight reading may not work.

 

Thanks again

[dukeav 46]

Hi

 

This is a great little utility many thanks for all the hard work!

 

Any idea if there is an update on using this accross a network, re your earlier comments?

 

 

Thanks again

 

I believe you need to first share the folder which contains your flight plans so that they can be read across the network. The the plan will be read correctly.

 

Once you share the flight plan folder, in the ATM console the flight path will be something like this:

 

\\computername\sharename\folder\abc.FLT

[reecemj 146]

Dukesan27...all my folders are shared on both computers.. ATM connects to p3D no problem using widefs but there needs to be in ATM away to direct the path to the folder for flight plans. For example...Radar contact uses widefx to connect but you have to direct the program to the flt plan folder.

ATM is a great program...