It is not giving me any discount for the 318 and I have AXE

46 US dollars is a bit steep right now for the 318 only

 

 

OK just now read at the bottom of the product page; Updates / Discounts (Available Wednesday Sept 24nd):

It is not giving me any discount for the 318 and I have AXE

46 US dollars is a bit steep right now for the 318 only

 

 

OK just now read at the bottom of the product page; Updates / Discounts (Available Wednesday Sept 24nd):

I am resisting buying until Wednesday. It's the 318 and the 319. Gonna fly the 320 now to distract myself.

Picked mine up at Simmarket since I got the A320/1 Extended from them the discount was automatically applied at checkout; no wait!

 

Nice Aircraft for the limited amount of time I have in it.  No issues with FPS but be a little cautious of the steering tiller and read the manual on it.  I had my GF TQ6 throttle set up for a Tri-jet (L1011).  Aerosoft chose to map the tiller axis to engine /throttle axis #3  Since that lever was at idle (not being used) on my throttle it was giving me a nosewheel hard over :He He:    Took about 20 minutes to learn why and about 20 seconds to fix via FSUIPC.

Well still not available at the Aerosoft store and the store I purchased  theA320 X at doesnt have the a319 for sale yet :(

Well still not available at the Aerosoft store and the store I purchased  theA320 X at doesnt have the a319 for sale yet :(

 

The update prices are online for a while already! 

You can't add the 318/319 & 320/321 bundle to your basket yet... gives an HTTP 500 internal server error. At least, it does here in two different browsers.

Just tried to make a purchase of the Bundled A318/9 & A320/321 which clearly shows up with two different prices for non-owners of the Airbus AXE(Euros 49.95) and owners of the existing AXE at Euros 24.95, yet when I go to place the order, I'm being billed for the full price. Eh? What gives?

 

Anyone else had this experience trying to purchase the bundle?

 

EDIT: All sorted now.

Got it now and flying from EGFF to EGPF (BAW). Was trying to go from YSSY but each lime I was taxing towards Runway 35L the plane kept crashing (not the game - it said CRASH) while going slowly on the Taxiway. Very confused by that one. Tried 3 times with a reboot of the sim each time before giving up and going to the UK

First hot fix is posted already!!!

 

http://forum.aerosoft.com/index.php?/topic/85412-hotfix-101-hf-1-01-quick-post-release-fixes/

 

These files aim to fix/add:

FMGS:

• CTD when entering ILS IDENT to tune the NAV Radios

FBW

• Minor pitch tuning

PFD

• VLS now affected by alpha when in turns and spoilers used. 
• VFE corrected to immediately step down when next step of flaps is commanded
• S Speed operative regardless of MCDU phase.
• Removed Green = overspeed indication when config is not clean

Misc

• APU FLAP OPEN time doubled.
• EXT PWR AVAIL light goes off when pushed on.

Sounds

• "SPEED SPEED" Low Energy Warning tweaked.

Vol6 StepbyStep Tutorial

• Various errors corrected, refer to manual changelog.

Checklist- / Copilot Functionality

• Copilot now says Auto for the Probe/Windowheat
• PF FLAPS ZERO call changed.

Got it now and flying from EGFF to EGPF (BAW). Was trying to go from YSSY but each lime I was taxing towards Runway 35L the plane kept crashing (not the game - it said CRASH) while going slowly on the Taxiway. Very confused by that one. Tried 3 times with a reboot of the sim each time before giving up and going to the UK

 

Mostly caused by AI traffic or bad afcad.

 

 

While comparing my PFPX plan it seems like the Airbus is burning too much fuel. Anyone else got this feeling? What is responsible for this planning mismatch, PFPX or the Airbus?

Just purchased this this afternoon and have installed it, but am quite frankly very disappointed with the font display on the MCDU when trying to select various start-up settings. Take a look at the image.

That picture is a bit too small...

 

I could use a specific Aerosoft Airbus 318 profile for PFPX because it seems to me the default PFPX profile doesn't come close to the Aerosoft version. And I also have no clue at ALL where to enter the data from the PFPX OFP into the Airbus loader...

 

Apart from all that I just finished a nice flight, my first PFPX flight after two tutorial runs.

Jeroen

 

Okay, will try for a larger pic. And the same thing as I found out in the previous AXE which completely put me off getting it out of its hangar is happening here. In CRZ mode, all of a sudden a klaxon sounds and it yo-yos up-dow-up-down. The ND display only displays a portion of the PLAN view. Now, I'm not all sure if this is in anyway related to the Nvidia driver that was automatically updated today or not.

 

 

This is what shows on the ND in PLAN view.

Looks like a driver issue - but I have the recent drivers and my display is normal so may be something else in your system.

@ vc10man - that's definitely not right.   Mine looks nothing like that.    Looks like you may have a missing font somehow, or a driver issue.

I'd try an uninstall / reinstall in the first instance but rest assured, the MCDU doesn't normally look like that.