Jump to content
Sign in to follow this  
Airbus

Fix for Unrealistic Strobes and Beacons Flashing?

Recommended Posts

I enjoy flying the Feelthere ERJ_V2 however the rapid flashing of strobes and beacons is unrealistic.  Has anyone come up with a fix?  I checked the Feelthere website and it appears that the flashing is part of the model and can't be changed.  I thought that perhaps some resourceful simmer may have fixed the problem or at least made some improvement.

 

Any suggestions?

 

Thanks!

Airbus


Al Kaupa

Digital Storm purchased 8/17/2011; Win7x64: Asus P8P67 Deluxe; Intel i7 2600K@3,9 GHZ; nVidia GTX 560Ti; 8GB DDR3 1600 Corsair Dominator; Power Corsair HX 750W; Samsung 850 EVO 500GB SSD; 300GB WD VelociRaptor; 1TB Seagate.

Share this post


Link to post
Share on other sites

I use a freeware program called Flusifix that adjusts beacon and strobe flashes to be more

 

of an intermittent flash as opposed to a synchronized flashing of them together.  I know

 

it helped the default and 3rd party freeware aircraft and may help your payware one.

 

 

http://www.wolfgang-picheta.de/


Charlie Aron

Awaiting the new Microsoft Flight Sim and the purchase of a new system.  Running a Chromebook for now! :cool:

                                     

 

Share this post


Link to post
Share on other sites

I found the program you suggested. My biggest concern is that the change will affect ALL my payware aircraft and perhaps not allow me to go easily back to my previous setup. Since the ERJ is the only culprit right know I may wait to see if others jump in here and offer a solution. I am looking at this program closely since it may be useful in some other areas.

 

Thanks!

Airbus


Al Kaupa

Digital Storm purchased 8/17/2011; Win7x64: Asus P8P67 Deluxe; Intel i7 2600K@3,9 GHZ; nVidia GTX 560Ti; 8GB DDR3 1600 Corsair Dominator; Power Corsair HX 750W; Samsung 850 EVO 500GB SSD; 300GB WD VelociRaptor; 1TB Seagate.

Share this post


Link to post
Share on other sites

I use a freeware program called Flusifix that adjusts beacon and strobe flashes to be more

 

of an intermittent flash as opposed to a synchronized flashing of them together.  I know

 

it helped the default and 3rd party freeware aircraft and may help your payware one.

 

 

http://www.wolfgang-picheta.de/

 

Couldn't get it to fix PMDG 777. I must have missed something.

Share this post


Link to post
Share on other sites

Couldn't get it to fix PMDG 777. I must have missed something.

No question that the FT ERJV2 external lighting has problems, but what is it about the PMDG beacons and/or strobes were you trying to fix?


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites

No question that the FT ERJV2 external lighting has problems, but what is it about the PMDG beacons and/or strobes were you trying to fix?

 

After watching some videos of 777s, those darn things are in sync.  :blush:

 

I also noticed that the "Beacon" and "Nav" lights are considerably brighter in real life, gonna have to mod them with Shockwave. I still contend the "Logo" light is too dark on the PMDG. :Whistle:  

 

Speaking of unrealistic lights, in DX 10 my UT2 AI aircraft lights still float above the aircraft, even noticed it on GSX Service Vehicles.  :blink: Will it ever end?

Share this post


Link to post
Share on other sites

"I enjoy flying the Feelthere ERJ_V2 however the rapid flashing of strobes and beacons is unrealistic."

 

Also strobes flashing inside some of their cockpits ..!


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Hello.

It is a method to tune down the rapid flashing strobes.

 

Have a go at changing the emitter properties of the fx file pointed to in your aircraft.cfg file eg.

 [lights]
 light.1 = 3, 40.40, 0, 10.55, fx_beaconh
 light.2 = 3, 12.00, 0, -11.00, fx_beaconb
 light.3 = 3, -102.6, 0.0, 1.75, fx_navwhih
 light.4 = 2, -102.9, 0.0, 5.65, fx_strobeh

 GoTo ..\effects\fx_strobeh.fx

 Open it in notepad and change this value:

 [Library Effect]
 Lifetime=5
 Version=2.00
 Radius=-1
 Priority=0

 [Properties]

 [Emitter.0]
 Lifetime=0.00, 0.00
 Delay=0.00, 0.00
 Bounce=0.00
 No Interpolate=1
 Rate=0.50, 0.50 <-----------------------Change this
 X Emitter Velocity=0.00, 0.00
 Y Emitter Velocity=0.00, 0.00
 etc.

 Make all emitter sub codes the same there could be any number of them according to the complexity.

 

Lars Peter.

Share this post


Link to post
Share on other sites

"I enjoy flying the Feelthere ERJ_V2 however the rapid flashing of strobes and beacons is unrealistic."

 

Also strobes flashing inside some of their cockpits ..!

The flashing inside the cockpits is a known problem.  There used to be a fix posted on the FeelThere forums, but then the forums were up( ordown)graded and many useful user posts seemed to disappear. Unfortunately I uninstalled the AC so no longer have the fix, but you might try posting in that forum and see what crops up


Hans Soule

Share this post


Link to post
Share on other sites

Hello.

It is a method to tune down the rapid flashing strobes.

 

Have a go at changing the emitter properties of the fx file pointed to in your aircraft.cfg file eg.

 [lights]

 light.1 = 3, 40.40, 0, 10.55, fx_beaconh

 light.2 = 3, 12.00, 0, -11.00, fx_beaconb

 light.3 = 3, -102.6, 0.0, 1.75, fx_navwhih

 light.4 = 2, -102.9, 0.0, 5.65, fx_strobeh

 GoTo ..\effects\fx_strobeh.fx

 Open it in notepad and change this value:

 [Library Effect]

 Lifetime=5

 Version=2.00

 Radius=-1

 Priority=0

 [Properties]

 [Emitter.0]

 Lifetime=0.00, 0.00

 Delay=0.00, 0.00

 Bounce=0.00

 No Interpolate=1

 Rate=0.50, 0.50 <-----------------------Change this

 X Emitter Velocity=0.00, 0.00

 Y Emitter Velocity=0.00, 0.00

 etc.

 Make all emitter sub codes the same there could be any number of them according to the complexity.

 

Lars Peter.

 

Thank you Lars your suggestion worked for me! :) I fixed the strobes and beacon lights to a much more realistic flashing rate.

Anyone trying to fix their ERJ_V2 lights, please use the method Lars outlines above.

 

Airbus


Al Kaupa

Digital Storm purchased 8/17/2011; Win7x64: Asus P8P67 Deluxe; Intel i7 2600K@3,9 GHZ; nVidia GTX 560Ti; 8GB DDR3 1600 Corsair Dominator; Power Corsair HX 750W; Samsung 850 EVO 500GB SSD; 300GB WD VelociRaptor; 1TB Seagate.

Share this post


Link to post
Share on other sites

The flashing inside the cockpits is a known problem.  There used to be a fix posted on the FeelThere forums, but then the forums were up( ordown)graded and many useful user posts seemed to disappear. Unfortunately I uninstalled the AC so no longer have the fix, but you might try posting in that forum and see what crops up

 

Yes, there are workarounds for some models in FS9 and FSX (FeelThere-Flashing-VC-beacon-tests).

 

As far as I know these two are still bad in FS9:

EMB-175 BAD  - Is a fix available?

EMB-195 BAD -  Is a fix available?


Best Regards,

Vaughan Martell - PP-ASEL KDTW

Share this post


Link to post
Share on other sites

Yes, there are workarounds for some models in FS9 and FSX (FeelThere-Flashing-VC-beacon-tests).

 

As far as I know these two are still bad in FS9:

EMB-175 BAD  - Is a fix available?

EMB-195 BAD -  Is a fix available?

 

I have not flown the FS9 birds for some time, but I don't recall any issues from memory.  You might want to check Feelthere forum.  Hopefully someone might chime in here.

 

Good luck!

 

Airbus


Al Kaupa

Digital Storm purchased 8/17/2011; Win7x64: Asus P8P67 Deluxe; Intel i7 2600K@3,9 GHZ; nVidia GTX 560Ti; 8GB DDR3 1600 Corsair Dominator; Power Corsair HX 750W; Samsung 850 EVO 500GB SSD; 300GB WD VelociRaptor; 1TB Seagate.

Share this post


Link to post
Share on other sites

I'm having a similar problem. When using Vladimir Gonchar's FSX version ("Touch O' Texas") of the Shupe/Thomas Beech 18 freeware aircraft, the beacon light creates flashes in the cockpit also. This is quite annoying in flight so I have to turn the beacon light off always. Does anyone know if this can be fixed as well so the light doesn't flash inside of the cockpit?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...