Another radar gauge for VC & Window usage

[spearmint_flyer 579]

On 1/30/2016 at 10:34 AM, kdfw__ said:

carenado pc12

another wx gauge placement option, instead of looking down where the avidyne is located, it's placed on the lower gnd530 display:

 

 

for the rxp530 option, this is in the vcockpit01, wx gauge added:

 

[Vcockpit01]

Background_color=0,0,0 

size_mm=1024,1024

visible=0

pixel_size=1024,1024

texture=$Panel_1

 

 

gauge00=GAUGEPC12EADI!Gauge_EFIS50_EADIVC,     0,  0,512,480

gauge01=GAUGEPC12EHSI!Gauge_EFIS50_EHSIVC,     0,481,512,480

gauge02=PC12CAR!ToggleEFIS,   0,  0,512,480

 

gauge03=rxpGNS!GNS530,   512,  0, 510,372

//gauge04=GPS530_3D_PC12!GPS_5302_3D,  512,373, 510,372

 

gauge04=RolASNRadar!ORadGauge,  610,420,  307, 226,   sweep|beam|icing

 

gauge05=PC12CAR!ToggleCAR530, 512,  0, 510, 32

gauge06=GAUGEPC12!Gauge_UPDATE,   0,  0,  1,  1

gauge07=CarSound_PC12!CarSound,  0,0,5,5

gauge08=PC12_EX500!EX500, 0,0,1,1

gauge09=PC12_Cabin_alt!C340_PRESS,         0,0,1,1

 

 

all gauges disabled in vcockpit04: 

 

[Vcockpit04]

Background_color=0,0,0 

size_mm=512,512

visible=0

pixel_size=512,512

texture=$Panel_4

 

//gauge00=EX500_PC12!EX500_config,       0,  0,   1,  1

//gauge01=EX500_PC12!EX500_3D,           0,  0, 513,409

 

//gauge00=RolASNRadar!ORadGauge, 99, 70, 314, 251, sweep|beam|icing

 

//gauge02=EX500_PC12!EX500_Update,       0,  0,   1,  1

//gauge03=PC12CAR!ToggleCARG500,         0,  0, 513, 32

 

I am trying to install this into PC12 V2 and I am getting a black screen, I see the clickspots and I am clicking but nothing ever shows up. I already removed the cockpit reflections but nothing happens. Can you help me? Maybe I did not set it up correctly. Here is the VC01

 

[Vcockpit01]
Background_color = 0,0,0
size_mm = 1024,1024
visible = 0
pixel_size = 1024,1024
texture = $Panel_1
gauge00 = GAUGEPC12EADI!Gauge_EFIS50_EADIVC,     0,  0,512,480
gauge01 = GAUGEPC12EHSI!Gauge_EFIS50_EHSIVC,     0,481,512,480
gauge02 = PC12CAR!ToggleEFIS,                       0,  0,512,480
gauge03 = ;GPS530_3D_PC12!GPS_530_3D,   512,  0, 510,372
//gauge04 = GPS530_3D_PC12!GPS_5302_3D,  512,373, 510,372
gauge04=RolASNRadar!ORadGauge,  610,420,  307, 226,   sweep|beam|icing
gauge05 = PC12CAR!ToggleCAR530,          512,  0, 510, 32
gauge06 = GAUGEPC12!Gauge_UPDATE,                0,  0,  1,  1
gauge07 = CarSound_PC12!CarSound,  0,0,5,5
gauge08 = PC12_EX500!EX500, 0,0,1,1
gauge09 = PC12_Cabin_alt!C340_PRESS,         0,0,1,1

[kdfw__ 542]

haven't tried it on v2 but should work.  the avionics master sw has to be on for the gauge to work, other than that, don't know.  is active sky running?  comment out the gps with "//" and see if that's causing it?

[roland_lfor 245]

Did you installed Vc++ 2013 x86 redistributables?

[spearmint_flyer 579]

Yes I am pretty sure i removed the already fps with the "///" However it is just a black screen. 

On 4/30/2017 at 6:51 PM, kdfw__ said:

haven't tried it on v2 but should work.  the avionics master sw has to be on for the gauge to work, other than that, don't know.  is active sky running?  comment out the gps with "//" and see if that's causing it?

Yes already installed I had it installed from previous add-ons I use. One question if is missing would I still get the clickspots? 

Maybe I should reinstall it. 

On 5/2/2017 at 4:12 PM, roland_lfor said:

Did you installed Vc++ 2013 x86 redistributables?

 

[silenthunter1999 0]

Hello. I have a simple question. How can I use gauge with P3D v3.4.18? I use it in VC of Avro RJ from QW, but after turning on radar it shows "NO LINK!"

[roland_lfor 245]

Hi,

Gauge runs equaly on FSX or P3D.

You need to run ASN or AS16 first in the background.

The gauge uses SimConnect.

[alexcunille 3]

Need help, I have installed RolasnRadar , put the  .dll on GAUGES have ASN build 6255 but i can´t get no weather on radar

//--------------------------------------------------------
[Window06]
size_mm=100,150
position= 0
visible=0
Window_pos=0.05,0.65
zorder=4
gauge00=RolasnRadar!ShellRadGauge, 0,0,100,150, sweep|beam|icing

 

 

[alexcunille 3]

Even AVIDYNE shows me weather on it 

 

[roland_lfor 245]

The gauge, as real world aircraft weather radars, display only precipitations, not clouds.

Radar Gauges that display cloud echoes are fake and unreal.

Select a rainy/storm weather situation in ASN and try again.

[alexcunille 3]

Thanks Roland iI will search a rainy/storm weather and try it

[alexcunille 3]

Roland, I know know that a real world aircraft weather radars, display only precipitations, not clouds.

And radar gauges that display cloud echoes are fake and unreal.

Tks

 

[alexcunille 3]

Quote

Roland, I know know

Roland, I know now, sorry, a wrong typo and everyday I learn something new 

[silenthunter1999 0]

On 12.05.2017 at 5:03 PM, roland_lfor said:

Hi,

Gauge runs equaly on FSX or P3D.

You need to run ASN or AS16 first in the background.

The gauge uses SimConnect.

Thank you. I forgot about that when I was testing something on Avro RJ. It's working, great work!

[alexcunille 3]

Hi I almost read all POST haven't seen a gauge to just click on The Radar Gauge to Close it, so I made this one

the example is in my case on Window06,

//--------------------------------------------------------
[Window06]
size_mm=200,300
position= 0
visible=0
ident=11555
Window_pos=0.05,0.55
zorder=4
gauge00=RolASNRadar!ShellRadGauge, 0,0,200,300, sweep|beam|icing
gauge02=alex!XGuage Transp Radar, 30,30,140,160

and you need the GAUGE from here
https://www.dropbox.com/s/gs9ksae0o0lgsx9/alex.rar?dl=0

What is in the GAUGE:
Icon_Transp.bmp

XGuage Transp Radar.xml

Just put the content of the RAR into a new folder name "alex" without quotes in the gauges folder for FSX or P3D

 

 

 

 

[alexcunille 3]

Roland i moved to P3D V 3.4 and i got these problem, (when used P3D v 2.5 I did not have any issue)

Firma con problemas:
  Nombre del evento de problema:    APPCRASH
  Nombre de la aplicación:    Prepar3D.exe
  Versión de la aplicación:    3.4.9.18400
  Marca de tiempo de la aplicación:    57d9b14e
  Nombre del módulo con errores:    RolASNRadar.dll
  Versión del módulo con errores:    1.0.0.0
  Marca de tiempo del módulo con errores:    5526ba3e
  Código de excepción:    c0000005
  Desplazamiento de excepción:    000036c0
  Versión del sistema operativo:    6.1.7601.2.1.0.256.1
  Id. de configuración regional:    2058