PA A321

[zool 0]

hello

 

can someone please give me his Aircraft.cfg and air files for the project airbus A321 ?

becuse mine is so bad and Shaky and have a lot of prablom

like : Trim , Speed , landing .. I dont know it's just not right

 

Plz help

 

[Luis Hernandez 570]

Why don't you download the base package from pafs.wf?

[zool 0]

Why don't you download the base package from pafs.wf?

 

I tried that but The link is not working and the package was deleted from AVSIM

[cbrown 1]

The link which Luis gave you above, pafs.wf, does work and gives you 6 A3xx base packages and several liveries, and they are on Avsim.

 

Colin B

 

Edit:  Sorry.  The A321 appears to be the only one which is missing.  You could change to the djc-a321-CFM or djc-a321-IAE which replace the Evolve-ai if you want it for AI traffic.

[mebull 27]

 

 

I tried that but The link is not working and the package was deleted from AVSIM

 

Let me / us know which model version you are using and I will see what I can do for you. Also, please explain what what happens with,'Trim , Speed , landing', that is not right, so I / we can look at the FDE for you. My older model was under powered and slightly over weight. The aircraft cfg. file seems to start out with maximum fuel and maximum passenger load and that combined with a bit underpowered leads / led to strange behavior.

 

Regards,

[zool 0]

Let me / us know which model version you are using and I will see what I can do for you. Also, please explain what what happens with,'Trim , Speed , landing', that is not right, so I / we can look at the FDE for you. My older model was under powered and slightly over weight. The aircraft cfg. file seems to start out with maximum fuel and maximum passenger load and that combined with a bit underpowered leads / led to strange behavior.

 

Regards,

 

I use Project airbus A321 CFM for FS2004

 

and for the trim I solved the trim prablom yesterday

 

speed : that's the Weirdest problem , in Climbing the plane Reaching the crz alt very very fast like in 10 mnt I Reach FL360 . but the Suffering is in des the speed doesn't Decreases ! fro example my speed is 280 knots and Iam des from 23000 to 12000 with VS:1200 when I Decrease the speed to 230 knots I have to open the spoilers and but the VS to 500 ! and after all that it Decreases very very very slow

Note : I use Wilco A318 Panel on the PA321 , is this had to do with the prablom ?

 

sorry for the long post but Plz help !

[mebull 27]

 

 

I use Wilco A318 Panel on the PA321 , is this had to do with the prablom ?

 

The panel in its' self shouldn't be the problem. A318 - A321 all the same. More likely in the descent speeds would be weight and fuel. You should be able to descend at 1500 or more (1800fpm?) with no speed increase at idle throttle. Try decreasing the passenger load and cargo load by about 40% and adjusting fuel to account for flight, wind and a reserve. I think you are getting there. You may climb like a rocket but that really is not wrong or bad.

 

Regards,