Jump to content

Archived

This topic is now archived and is closed to further replies.

Nduru

Ezdok on V 2.5

Recommended Posts

Make sure it's not assigned something else in FSX or your mouse software.

 

Also check in fsuipc it also has a mouse look option


Dan.W

20.jpg

 

Share this post


Link to post

there is a video by  a guy called FSXgenius  (can I mention him)that is quite helpful ,telling you what keys  to delete the assignment numbers from in your controller setup ,saved me a lot of time

Peter

Share this post


Link to post

Nduru,

 

You can open the controller menu in P3D and do this:

 

-select a control that is not assigned to anything

-assign it to whatever hardware you think may be in conflict

-if it is assigned to something else, it will warn you

-click OK. Say yes to the warning and close the dialogue

-select the item you assigned and delete the assignment

-otherwise it you'll know that nothing is assigned to that hardware control

-in that case, just click cancel


Regards,

Graham Derreck

CYMM

Share this post


Link to post

Is only the middle mouse button, it has a massive delay (could be because of fps drops, ezdok is in beta or its p3d), i have no idea

Share this post


Link to post

You might want to check the mose configuration in Windows and see what is assigned to the middle mouse button. Maybe that is the conflict.


Regards,

Graham Derreck

CYMM

Share this post


Link to post

they released the Beta 1.185 to work for P3D 2.4+

 

You can check their Forum, you will find the link and the guide how to install

 

It's working fine for me here


Fábio Magnoni

Share this post


Link to post

My EZdok is also working without issue.

 

Here's how I installed it in P3D 2.5:

 

-first uninstall everything to do with EZdok. Do a search and check for leftovers.

-install 1.15 using the Estonia Migration Tool. It won't install into P3D on its own

-don't run the configurator

-there is a 1.17 update. Install that using the migration tool

-don't run the configurator

-this may not be necessary but you can copy the 1.17 P3D beta to the program folder

-don't run the configurator

-download 1.18.5 from the EZdok forum. Their forum is at SimForums

-follow the directions, copying the contents to your program folder. DON'T use the migration tool

-run the configurator. The reason to do it now, is that it is superior to the old ones. It doesn't put entries into all aircraft

 

That should get you to a good place. Make sure nothing is conflicting with your middle mouse button. If that doesn't do it, you should probably go to the EZdok forum and post the issue. Marniftarr, the author, is active there.

 

Good luck.


Regards,

Graham Derreck

CYMM

Share this post


Link to post

My EZdok is also working without issue.

 

Here's how I installed it in P3D 2.5:

 

-first uninstall everything to do with EZdok. Do a search and check for leftovers.

-install 1.15 using the Estonia Migration Tool. It won't install into P3D on its own

-don't run the configurator

-there is a 1.17 update. Install that using the migration tool

-don't run the configurator

-this may not be necessary but you can copy the 1.17 P3D beta to the program folder

-don't run the configurator

-download 1.18.5 from the EZdok forum. Their forum is at SimForums

-follow the directions, copying the contents to your program folder. DON'T use the migration tool

-run the configurator. The reason to do it now, is that it is superior to the old ones. It doesn't put entries into all aircraft

 

That should get you to a good place. Make sure nothing is conflicting with your middle mouse button. If that doesn't do it, you should probably go to the EZdok forum and post the issue. Marniftarr, the author, is active there.

 

Good luck.

 

I followed these instructions to the letter, twice. Both times, 1.185 config won't launch.

 

Ezdok/TrackIR was working great in my P3D2.4, and this is my first attempt to install EZDok in 2.5. I can live with TrackIR alone, but I certainly miss my custom views.


Aaron Thacker

 

Share this post


Link to post

This install method worked perfectly, after fully uninstalling EZDOK - 

 

http://www.simforums.com/forums/ezca-1185-beta-available-for-download_topic51089.html

 +1  

 

It needs to be stressed before doing this install that you have disabled UAC and your antivirus.  Then, after you've cleaned out all remnants of any prior Ezdok installation, re-install 1.15 using the original wrapper.  After the v1.15 install, do not run the v1.15 configurator.  Follow the rest of the instructions for v1.18.5 linked above and then run the v1.18.5 configurator.  After all is working in P3D, don't forget to go back and re-enable UAC and your antivirus.



Doug Miannay

M1mhPJG.png 1BV5Kt7.jpg

PC Specs: i7-8700K (OC 5.0GHz - HT Off) | ASUS Maximus X Hero Z370 | Corsair Hydro H150i Pro Cooler | ASUS STRIX-RTX2080TI-11G | 32GB G.Skill DDR4 TridentZ RGB 4000Hz  | Samsung 960 Pro 512GB M.2 (OS/Apps) | Samsung 960 Pro 1TB M.2 (Sim/Games) | Corsair H1000i PSU | Fractal Design Define R6 Blackout Case | Win10 Pro x64

Addons: Many Orbx Products | Many FSD/FB/FT/PacS/LatinV/Aerosoft Airports | ASP4/ASCA | UTL at 35% | ChasePlane | PMDG/FSL/A2A Aircraft

Share this post


Link to post

Is there a way to install EZDOK into P3D v2.5 without the Migration Tool? I already have it working in FSX on my computer, but eventually plan on uninstalling FSX and moving over to P3D solely. 

 

What is the best way to get this working with using Estonia's Migration Tool?


Aaron Vinci

----------------

Intel i9 10900K (no overclock) / Windows 10 Pro 2004 64 bit / 64GB DDR4 3200MHz CL 16RAM / EVGA NVIDIA GTX 1080 FTW 8GB RAM / 1TB NVME SSD (OS Drive) / 2TB SATA SSD / 4TB SATA HDD / 850watt PSU

Share this post


Link to post

This install method worked perfectly, after fully uninstalling EZDOK -

 

Glad you got it going.


Regards,

Graham Derreck

CYMM

Share this post


Link to post

I heard the author of EZDOK is back in business again and have made a new version specifically for FSX Steam Edition and P3D v2.5. EZDOK 1.18.6

 

Anyone try the new version? I don't think you even need to use the migration tool since it's been updated for P3D now.


Aaron Vinci

----------------

Intel i9 10900K (no overclock) / Windows 10 Pro 2004 64 bit / 64GB DDR4 3200MHz CL 16RAM / EVGA NVIDIA GTX 1080 FTW 8GB RAM / 1TB NVME SSD (OS Drive) / 2TB SATA SSD / 4TB SATA HDD / 850watt PSU

Share this post


Link to post
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    28%
    $7,170.00 of $25,000.00 Donate Now
×
×
  • Create New...