Linda 2.6.0 crash :/

[twincessna340a 8]

 

 

Can you confirm your logitech joystick has the vid 046D/ pid C215?

 

It is.

 

 

 

There are reports that it can stop responding for 60-90 secs.

 

Waited and mine comes up after ~60 sec. I have yet to try it with FSX. Here is the log:

 

Init LINDA 2.6.0 ...

Can start...

Creating forms...

LINDA Ver 2.6.0 (130) GUI starting...

Fonts added

Sys Config loaded

VRI config loaded

HID Devices loaded

HID Definitions loaded

HID config loaded

Selector initialized

News read

Main Timer started

--> Main form: done!

--> Viewer form: done!

--> Input form: done!

--> FSX controls form: done!

--> Console form: done!

--> Macros form: done!

--> Module form: done!

--> Editor form: done!

HID OnArrival 2794F30

HID OnArrival 27950B0

HID OnArrival 2795230

HID OnArrival 27953B0

HID OnArrival 27952F0

HID OnArrival 2795470

HID OnArrival 2795530

HID OnArrival 27956B0

HID OnArrival 2795770

HID OnArrival 2795830

HID OnArrival 27958F0

HID OnArrival 2795A70

HID OnArrival 2795BF0

HID OnDeviceChange 

HID IsJoystick test = 2794F30=046D/C215 = Joystick

HID IsJoystick test = 27950B0=046D/C231 = Mouse

HID IsJoystick test = 2795230=046D/C232 = Keyboard

HID IsJoystick test = 27953B0=046D/C24D = Keyboard

HID IsJoystick test = 27952F0=046D/C24D = Keyboard

HID IsJoystick test = 2795470=046D/C24D = 1

HID IsJoystick test = 2795530=046D/C24D = 0

HID IsJoystick test = 27956B0=046D/C50E = Mouse

HID IsJoystick test = 2795770=047F/AA05 = 1

HID IsJoystick test = 2795830=047F/AA05 = 5

HID IsJoystick test = 27958F0=047F/AA05 = 1

HID IsJoystick test = 2795A70=06A3/0C2D = Joystick

HID IsJoystick test = 2795BF0=06A3/0C2D = Joystick

HID - Switch Device - hidTreeFill knownid 1

DEV CHANGE: 046DC2150

HID - SwitchDevice 1

HID - Switch Device - hidTreeFill knownid 1

Finished, ok!

Closing Viewer form

Closing Input form

Closing FSX Controls form

Closing Console form

Closing Macros form

Closing New Module form

Closing Editor form

Terminating Application

HID Unplug detected

HID Unplug detected

HID Unplug detected

[ScotFlieger 280]

Waited and mine comes up after ~60 sec. I have yet to try it with FSX.

 

Hi Ike

 

Thank you.  Let me know how you get on.  Some users are experiencing a slow start up (60-90s) but I have yet to determine why.

 

What are your other joysticks (06A3/0C2D) ?

Edited March 8, 2015 by ScotFlieger
Joystick question

[ScotFlieger 280]

I have done some testing with a fresh installation of P3D 2.5 and the PMDG737NGX with LINDA 2.6.0.  I experienced no crashes during the 737 countdown or during flight.  I am unable to pin down a common factor from the above reports.

 

Can those experiencing the crash try starting FSX/P3D without any default PDMG737 and try the default FSX C172 aircraft.  Also try starting LINDA 2.6.0 (130) before starting your FSX/P3D.  If you did not try the beta test, download and install 2.6.0 beta 11 in case something happened with the formal build. Simplify your set up to a single joystick and re-test.

 

Please report here the following information and email copies of your linda2.log, cut-and-paste of console output and error reports to linda@awginfosys.net. PLEASE DON'T PASTE LONG REPORT ON FORUM.

 

Information required:

 

Windows version

Flt Sim version

Joystick devices (including VID and PID codes)

Description of what you were doing at time of crash

Screenshots of any events.

 

NOTE: Some users have reported a slow start up (60-90secs). If LINDA shows 'not responding' and blank please wait to see if sorts itself out before End Processes.

[twincessna340a 8]

What are your other joysticks (06A3/0C2D)

 

Saitek Throttles

 

 

Sent you my FSX crash report via email.

[twincessna340a 8]

I'm not sure if this helps, but when returning to 2.5.7 I had crashes still:

 

First I tried simply replacing the 2.6 ipcready.lua, LINDA.exe, and linda.lua with the 2.5.7 ones which still let to FSX crashing.

 

I then tried backing up my Linda and Linda-cfg folders then overwrote all Linda files/folders with the 2.5.7 installation and then copied the backed-up Linda and Linda-cfg folders on top of the 'fresh' folders. FSX still crashed.

 

For FSX to work again I had to delete all Linda files/folders and do a clean install with 2.5.7 using no backups.

[ScotFlieger 280]

Hi Ike

 

Your LINDA config files have become corrupted somehow. A completely clean install, as you have done, was the best way forward. Your backup aircraft config-hid.lua and config-mcp*.lua files should still work and can copied back.

 

If you have a copy of the 'corrupt' installation please zip it and email it to me.

[guenseli 1,577]

Does it change things if you start LINDA as 

 

1)

Administrator?

 

2)

Exclude LINDA from your Anti virus!?

[gboz 157]

With me Linda 2.5.7 is fine but 2.6 and 2.6.1 causes P3D 2.5.12944.0. to stop working as Linda starts.

Also stops P3D when starting Linda first then starting P3D to detect FSUICP version.

No error report from P3D.
Using Win7 64bit.

Hotas Warthog JS and Throttle,

GoFlight LGT and TQ6

Desktop Avionics 1010 panel.

In Linda there are constantly changing superimposed single digits displayed just to the right of the Settings box on the Summary page. Never seen that before.

gb.


Init LINDA 2.6.1 ...
Can start...
Creating forms...
LINDA Ver 2.6.1 (138) GUI starting...
Fonts added
Sys Config loaded
VRI config loaded
HID Devices loaded
HID Definitions loaded
HID config loaded
Selector initialized
News read
Main Timer started
--> Main form: done!
--> Viewer form: done!
--> Input form: done!
--> FSX controls form: done!
--> Console form: done!
--> Macros form: done!
--> Module form: done!
--> Editor form: done!
HID OnArrival 4C44430
HID OnArrival 4C445B0
HID OnArrival 4C44670
HID OnArrival 4C44730
HID OnArrival 4C44970
HID OnArrival 4C447F0
HID OnArrival 4C44A30
HID OnArrival 4C44AF0
HID OnArrival 4C44BB0
HID OnArrival 4C44C70
HID OnArrival 4C44D30
HID OnArrival 4C44DF0
HID OnArrival 4C45030
HID OnArrival 4C44EB0
HID OnArrival 4C450F0
HID OnArrival 4C451B0
HID OnArrival 4C45270
HID OnArrival 4C1C880
HID OnArrival 4C1C940
HID OnArrival 4C1CAC0
HID OnArrival 4C1CC40
HID OnArrival 4C1CDC0
HID OnArrival 4C1CF40
HID OnDeviceChange
HID IsJoystick test = 4C44430=044F/0402 = Joystick
HID IsJoystick test = 4C445B0=044F/0404 = Joystick
HID IsJoystick test = 4C44670=046D/0A1F = 1
HID IsJoystick test = 4C44730=046D/0A1F = 1
HID IsJoystick test = 4C44970=046D/C52B = Keyboard
HID IsJoystick test = 4C447F0=046D/C52B = Mouse
HID IsJoystick test = 4C44A30=046D/C52B = 1
HID IsJoystick test = 4C44AF0=046D/C52B = System Control
HID IsJoystick test = 4C44BB0=046D/C52B = 88
HID IsJoystick test = 4C44C70=046D/C52B = 1
HID IsJoystick test = 4C44D30=046D/C52B = 2
HID IsJoystick test = 4C44DF0=046D/C52B = 4
HID IsJoystick test = 4C45030=046D/C537 = Mouse
HID IsJoystick test = 4C44EB0=046D/C537 = Keyboard
HID IsJoystick test = 4C450F0=046D/C537 = 1
HID IsJoystick test = 4C451B0=046D/C537 = System Control
HID IsJoystick test = 4C45270=046D/C537 = 1
HID IsJoystick test = 4C1C880=046D/C537 = 2
HID IsJoystick test = 4C1C940=046D/C537 = 80
HID IsJoystick test = 4C1CAC0=04D8/06E7 = Joystick
HID IsJoystick test = 4C1CC40=06A3/0764 = Joystick
HID IsJoystick test = 4C1CDC0=09F3/0040 = Flight
HID IsJoystick test = 4C1CF40=09F3/0200 = Joystick
DEV CHANGE: 044F04040
HID - SwitchDevice 2
HID - Switch Device - hidTreeFill entered
HID - Switch Device - hidTreeFill knownid 2
HID - Switch Device - hidTreeFill update buttons
HID - Switch Device - hidTreeFill update buttons end
HID - Switch Device - hidTreeFill update hats
HID - Switch Device - hidTreeFill update end
[awg] DevName = Unknown Joystick to Warthog JS
[awg] DevName = Unknown Throttle to Warthog Throttle
[awg] DevName = Unknown Device to Panel 1010
[awg] DevName = Unknown Device to GF LGT
[awg] DevName = Unknown Throttle to GF Throttle
HID - Switch Device - hidTreeFill entered
HID - Switch Device - hidTreeFill knownid 2
HID - Switch Device - hidTreeFill update buttons
HID - Switch Device - hidTreeFill update buttons end
HID - Switch Device - hidTreeFill update hats
HID - Switch Device - hidTreeFill update end
DEV CHANGE: 044F04020
HID - SwitchDevice 1
HID - Switch Device - hidTreeFill entered
HID - Switch Device - hidTreeFill knownid 1
HID - Switch Device - hidTreeFill update buttons
HID - Switch Device - hidTreeFill update buttons end
HID - Switch Device - hidTreeFill update hats
HID - Switch Device - hidTreeFill update end
Finished, ok!
Closing Viewer form
Closing Input form
Closing FSX Controls form
Closing Console form
Closing Macros form
Closing New Module form
Closing Editor form
Terminating Application
HID Unplug detected
HID Unplug detected
HID Unplug detected
HID Unplug detected
HID Unplug detected

[ScotFlieger 280]

Hi gb

 

Thank you for your report and sorry to hear that you are having problems. The linda2.log file shows nothing amiss.

 

LINDA 2.6.1 has been extensively reworked internally from 2.5.7 to handle the Dynamic HID connection/reconnection.  It is worth considering a fresh installation when upgrading.  After backing up your \p3d\modules\linda and \linda-cfg, install 2.6.1 before copying back you \linda\aircrafts and \linda-cfg\aircrafts folders.  Also make sure you have the latest version of FSUIPC installed (4.939).

 

I did notice this morning a P3D error message stating that 2 versions of FSUIPC were running.  I managed to clear this. Make sure that LINDA's 'Start GUI with SIm' is ticked and close LINDA before running P3D.  Alternatively, un-tick it to start LINDA separately.  There are some changes in the way P3D handles FSUIPC and I will need to investigate further.

 

The flickering number below FSXsync is something I added to easily determine that newly added joystick were working correctly. It has no other purpose.

[Dbader 0]

Hi there.

 

Regrettably both 2.6.0 and 2.6.1 lead to an instant CTD just as soon as Linda begins loading. (Once the aircraft appears on the runway)

 

All is well with 2.5.7 however.

 

 

Running FSX in Windows 7 64 bit

Just using a Saitek T-Hotas at the moment.

[ScotFlieger 280]

Hi db

 

Have you got LINDA 2.6.1 starting automatically with FSX or did you start it manually?  It would be useful to know what appears on the console up to the point LINDA crashes. With LINDA only running the console will be blank, when FSUIPC starts it will log FSUIPC information and will only start LINDA lua code and logging when the aircraft appears.

 

Did you carry out a 'clean' installation of 2.6.1 (backing up and then deleting \linda and \linda-cfg before installing the update? What aircraft are you using?  Does it crash with all aircraft?

 

Please email me your fsuipc.cfg and linda2.log files to linda@awginfosys.net.

[gboz 157]

LINDA 2.6.1 has been extensively reworked internally from 2.5.7 to handle the Dynamic HID connection/reconnection. It is worth considering a fresh installation when upgrading. After backing up your \p3d\modules\linda and \linda-cfg, install 2.6.1 before copying back you \linda\aircrafts and \linda-cfg\aircrafts folders. Also make sure you have the latest version of FSUIPC installed (4.939).

 

 

Hi Scot.

Thanks for the suggestions but no joy.

 

My results were with a clean install of Linda.

 

I deleted the five 2.5.7 Linda files plus the Linda log file from the P3D Modules folder.

Also deleted FSUICP.ini and FSUICP.log.

Pasted the five Linda 2.6.1 files into the Modules folder.

Ran Linda.exe.

Saved off Joystick etc.

Started P3D to get Linda to recognise FSUICP.

Just after the plane loads at the chosen location the red "Linda is started" text comes up on the P3D screen.

A second or two afterwards P3D stops working with just a "P3D has stopped working, checking for a solution" warning box.

Then a "Do you want to close the program box".

Linda itself stays open but does not find the FSUICP files.

 

gb.

 

Edit: Just tried...

Deleted P3D Modules folder.

Reinstalled latest full FSUICP.

Pasted in the 2.6.1 Linda files.

Then as above from "Ran Linda.exe"... with same results.

 

gb.

[IFR7700 228]

2.6.1 was working flawlessly for several days.  Then I decided to explore the LINDA console and pushed the "Reload LUA Engine" button, and the sim crashed to desktop.  I was not able to use 2.6.1 afterwards without CTD.  If you would like, I'll try to replicate the event and send you the file.

[ScotFlieger 280]

Thank you Dennis for the report.  I need more evidence to investigate the 'new' CTD problem.  Can you try the new update 2.6.2 available now on the Download sub-forum?

 

Please email your linda2.log file to linda@awginfosys.net if you repeat the problem.

[ankh21 17]

Hi all,

 

i used a very old LINDA Version and tried to update with the 2.6.2.

Now i have the same issue. As soon as the LUA Display appears, FSX crashes.

 

Here is the LOG:

 

Init LINDA 2.6.2 ...

Can start...

Creating forms...

LINDA Ver 2.6.2 (140) GUI starting...

Fonts added

Sys Config loaded

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04020 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

hidConfigDefLoad - 044F04040 not found

VRI config loaded

HID Devices loaded

HID Definitions loaded

HID config loaded

Selector initialized

News read

Main Timer started

--> Main form: done!

--> Viewer form: done!

--> Input form: done!

--> FSX controls form: done!

--> Console form: done!

--> Macros form: done!

--> Module form: done!

--> Editor form: done!

HID OnArrival 27DA900=044F/0402

HID OnArrival 27DAA80=044F/0404

HID OnArrival 27DAC00=046D/C52B

HID OnArrival 27DAB40=046D/C52B

HID OnArrival 27DACC0=046D/C52B

HID OnArrival 27DAD80=046D/C52B

HID OnArrival 27DAE40=046D/C52B

HID OnArrival 27DAF00=046D/C52B

HID OnArrival 27DAFC0=046D/C52B

HID OnArrival 27DB080=046D/C52B

HID OnArrival 27DB200=079D/0201

HID OnDeviceChange

HID IsJoystick test = 27DA900=044F/0402 = Joystick

HID IsJoystick test = 27DAA80=044F/0404 = Joystick

HID IsJoystick test = 27DAC00=046D/C52B = Keyboard

HID IsJoystick test = 27DAB40=046D/C52B = Mouse

HID IsJoystick test = 27DACC0=046D/C52B = 1

HID IsJoystick test = 27DAD80=046D/C52B = System Control

HID IsJoystick test = 27DAE40=046D/C52B = 88

HID IsJoystick test = 27DAF00=046D/C52B = 1

HID IsJoystick test = 27DAFC0=046D/C52B = 2

HID IsJoystick test = 27DB080=046D/C52B = 4

HID IsJoystick test = 27DB200=079D/0201 = Joystick

Finished, ok!

Closing Viewer form

Closing Input form

Closing FSX Controls form

Closing Console form

Closing Macros form

Closing New Module form

Closing Editor form

Terminating Application

HID Unplug detected

HID Unplug detected

HID Unplug detected

 

 

I am using a HOTAS Joystick and Throttle. With my old version, Joystick action like bakes were available at the Moment the sim starts, but now it takes up to 5 sec. till the LUA is loaded...and the sim crashes.

 

Matthias