Jump to content

Sign in to follow this  
HamSammich

Woohoo! Windows Joystick Disconnects Conclusively Solved!

Recommended Posts

If you've been tearing your hair out over Win 8.1 or 10 joystick and throttle disconnects in P3D, especially with Saitek products, this could be for you.

 

I stumbled across a cure that, so far, has been absolutely, 100-percent effective. This works when disabling selective suspend in device manager does not. It works when changing power settings in Control Panel does not. It works when the problem presents itself in Windows 8.1 OR 10. Here goes.

 

Search the registry for this string, EnhancedPowerManagementEnabled=1, where the device it refers to corresponds to a joystick, pedals, throttle quadrant and so on.

 

Change it to read EnhancedPowerManagementEnabled=0

 

Reboot.

Smile.

 

Bear in mind, though, this needs to be redone every single frickin' time you upgrade Windows, as the Windows install stomps on those Registry keys. Sorry "resets them to the 'proper' values." :)

 

Hope this settles it once and for all

Share this post


Link to post
Share on other sites

Hey... Congrads! Aside from joystick hell, would you recommend any particular feature of win8.1 for P3d?

Share this post


Link to post
Share on other sites

Does this still work when you swap devices from one usb socket to another? or does windows reset the power management.

 

bob

Share this post


Link to post
Share on other sites

Yep, works fine, thanks for the tip! :-)


Best regards,
David Roch
Intel 9900K@5.1, Asus Maximus XI Formula, 32Gb G.Skill TridentZ 4133 CL17, EVGA RTX 2080 Ti XC ULTRA GAMING, 3x SSD Samsung 970 Pro M.2, Corsair 1600W PSU & 49" Samsung curved 4K TV monitor@30Hz.
MSFS Alpha tester

Share this post


Link to post
Share on other sites

I followed these steps (the workaround bit) similar to what you recommend back when I was on Windows 8.1 x64 : https://support.microsoft.com/en-us/kb/2900614/en-us

 

It worked for a while and then suddenly only worked for a part of the joystick (Saitek X52), eventually completely failing. I then resorted to using FSUIPC and as far back as I can remember, it worked perfectly without any need for registry hacks. There's also DLYS (Don't Lose Your Stick) that achieves the same purpose (ran this before mapping all axes through FSUIPC) but runs outside of the sim : http://va-gae.eu/flightoperations/download/fsx-joystick-tool.html

Share this post


Link to post
Share on other sites

If you've been tearing your hair out over Win 8.1 or 10 joystick and throttle disconnects in P3D, especially with Saitek products, this could be for you.

 

I stumbled across a cure that, so far, has been absolutely, 100-percent effective. This works when disabling selective suspend in device manager does not. It works when changing power settings in Control Panel does not. It works when the problem presents itself in Windows 8.1 OR 10. Here goes.

 

Search the registry for this string, EnhancedPowerManagementEnabled=1, where the device it refers to corresponds to a joystick, pedals, throttle quadrant and so on.

 

Change it to read EnhancedPowerManagementEnabled=0

 

Reboot.

Smile.

 

Bear in mind, though, this needs to be redone every single frickin' time you upgrade Windows, as the Windows install stomps on those Registry keys. Sorry "resets them to the 'proper' values." :)

 

Hope this settles it once and for all

Also do this:

go to BIOS /advanced/intel XHCI mode disable….EHCI handoff/disable

that works....


Pedro Rodriguez

 

Share this post


Link to post
Share on other sites

Hey, I solve that issue with registry entry, but I achieve another problem with saitek products with W8.1 64bit. I run FSX:SE and everything working fine unless I lose focus on FSX, it menas that you go to Windows or another application and return back to FSX. At this point FSX lose Saitek Yoke and Pedals. I cant see it at controls menu, but if you look into windows devices, they are still connected. Reconnect doesnt help, I have to restart FSX. really annoying, especially when you accidentaly press WIN key.

 

That occurs with both default WIN and saitek drivers - no difference.

 

I try to find some working fix, but I dont. So I temporarily switch back to W7 which working well, but... I really like W8.1 environment :(


i7-8700k, RTX2070 Super, custom water cooling, 32GB RAM, 6TB SSD space
Prepar3D v4, X-Plane 11, 40" 4k TV
Rex, Active Sky, RealAir and A2A pilot, GTN, ORBX mostly everywhere
 
30.jpg

Share this post


Link to post
Share on other sites

I need some education please, how do you go about making a change within the registry on Windows 8?  I can't even find that string within the registry.  If anyone has done this fix please point me in the direction of a step by step process, thanks.

Share this post


Link to post
Share on other sites

Or install WIndows 10 (for free).

100% fix


Jude Bradley
Beech Baron: Uh, Tower, verify you want me to taxi in front of the 747?
ATC: Yeah, it's OK. He's not hungry.

X-Plane 11 and P3D v5 hotfix 2  🙂

System specs: Windows 10  Pro 64-bit, i9-9900KF  Gigabyte Z390 RTX-2070, 32GB RAM  1X 1TB M2 for X-Plane 11, 1x 500GB SSD for P3Dv5, 1x256GB SSD for OS. Alpha-tester for FS2020

Share this post


Link to post
Share on other sites

Great thread.


Angelo Cosma
PPL ASEL / IFR
Federal Aviation Administration (FAA) 

Field Service Representative (SEA) ZSE ARTCC

Intel i7 6700K 4.8Ghz / ASUS ROG Maximus Hero VIII / 16GB DDR4 3200Mhz Ram / EVGA 1080Ti FTW3/ Corsair H110i GTX EVGA 850 Watt Gold / Samsung 850 500gb SSD

Share this post


Link to post
Share on other sites

Another solution which worked for me was to simply just open up a new logging file on FSUIPC.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    21%
    $5,465.00 of $25,000.00 Donate Now
×
×
  • Create New...