Jump to content

Archived

This topic is now archived and is closed to further replies.

Skywolf

How are you all using your FTX Regions with P3D2.5?

Recommended Posts

Hey,

 

At this time, I have tried everything from complete OS reinstalls along with all low textures from Rex Texture Direct and low settings / default settings / high settings in prepar3d.cfg and I just OOMs in FTX full fat areas like PNW-NRM-CRM-NCA (along with Global & Mesh only installed - no vector). No Orbx airports, I can't even enjoy them with OOM hits in P3D2.5.  Weather - ASN with 4 layers

 

And I am only flying A2A C182 and Commanche.

 

Sure, I can save the flight by FSUIPC and use that, but that is just getting annoying and besides GTN750 requires me to have the flight plan saved in it prior to crash.  If I don't save it, I have to enter it manually again.

 

What gives?  This is just getting ridiculous.  If you want to see my pc specs - it is in my profile.

 

My question for you all is - How are you able to enjoy the FTX regions or are you all just using FTX Global?

 

Thanks,

 

-skywolf

 

PS - Yes, I know this is a 32bit app with limitations

Share this post


Link to post

That's not right, something is definitely wrong there.  Whilst I don't have the American regions, I can move happily between the UK ones (ENG, SCO, WLS, IRL) without getting OOMs in the Comanche and the Q400, and that's with Global/Vector/Euro LC installed and with UK2000/ORBX airports.

 

What are your other settings?  Particularly your texture/mesh resolutions and autogen/LOD settings.


30xhnrt.png

Banner_MJC1.png

Share this post


Link to post

I have tried Autogen from Normal to Very Dense - Same Results.

 

Clean config file too with defaults - same results

 

LOD - 4.5-6.5 - tried them all - after a bit the OOM surfaces in PNW

 

I have tried almost every single combination there is.  The only 1 thing is I wonder if Mytraffic 6 is causing some issues - I have AI set to 15

Share this post


Link to post

As you said that's ridiculous indeed. I have P3D 2.5, all of the ORBX regions installed, including FS Global Ultimate, my traffic X at 60% and everything runs like clock work.

 

I know that doesn't help you, but there must be something wrong with your set up or computer. It is definitely not something that has anything to do with ORBX or P3D. Otherwise this forum would brim with complaints.

Share this post


Link to post

As you said that's ridiculous indeed. I have P3D 2.5, all of the ORBX regions installed, including FS Global Ultimate, my traffic X at 60% and everything runs like clock work.

 

I know that doesn't help you, but there must be something wrong with your set up or computer. It is definitely not something that has anything to do with ORBX or P3D. Otherwise this forum would brim with complaints.

 

I totally agree with you - but I can't seem to figure it out - it is driving me nuts.  It is a new computer, I did ask in LM forums about resolution as I am running in 4K.  LM devs said that it should not make a difference.  I need to find what is causing my VAS consumption

 

I doubt SLI consumes VAS

Share this post


Link to post

What texture resolution are you running, just curious? I don't go above 2048px. What cloud textures do you use and what resolution? What about road traffic?

 

Regards,

 

Todd


Regards,

Todd Harrell

 

Computer: i7 3770k @ 4.6 GHz, 16 GB DDR3 RAM, GTX 1070 GPU, 750W PSU, 250 GB SSD (Win 7), 500 GB SSD (P3D), 2 x 1TB HDD, 28-inch Viewsonic 1080p monitor

Sim: P3Dv3

Share this post


Link to post

What texture resolution are you running, just curious? I don't go above 2048px. What cloud textures do you use and what resolution? What about road traffic?

 

Regards,

 

Todd

Road Traffic and Boat Traffic is set to 0

 

Textures are 1024

 

And anything which can be reduced in Rex Direct is set to 1024 and 512

 

Even my Cloud shadows is set to 512

 

 

Only Major Variables are 4K, SLI and My Traffic 6 set to 15 on GA/Airliners

Share this post


Link to post

I know you don't want to hear it again but something else is going on. I don't use FTX Global any longer but when I did I had no OOM issues. I have all the areas, PNW, EU, Norway, CRM, etc. Screen resolution is 1920x1200 - Run SLI with most settings maxed. I have MT6 set at 25% and ASN with 3 layers.

 

ONLY place I get an OOM is if I take a short flight from KBUR - KSBP in an A2A or other high quality a/c.

 

Vic


 

P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 2080ti 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

By chance do you have any photoscenery (Blue Sky, Megascenery, etc.)?  If so, it will make a difference in memory usage even when not flying in those areas.  Disable any that you're not going to actually fly in.

 

Scott

Share this post


Link to post

I know you don't want to hear it again but something else is going on. I don't use FTX Global any longer but when I did I had no OOM issues. I have all the areas, PNW, EU, Norway, CRM, etc. Screen resolution is 1920x1200 - Run SLI with most settings maxed. I have MT6 set at 25% and ASN with 3 layers.

 

ONLY place I get an OOM is if I take a short flight from KBUR - KSBP in an A2A or other high quality a/c.

 

Vic

 

Hey Vic, you are right something else is going on and I can't figure it out at all.  I really have a clean system - I tried with Clean Windows 8.1 and Windows 10 now - same issue on both.  I can't solve it at all.

 

By chance do you have any photoscenery (Blue Sky, Megascenery, etc.)?  If so, it will make a difference in memory usage even when not flying in those areas.  Disable any that you're not going to actually fly in.

 

Scott

 

Hey Scott,

 

I do not have any photoscenery at all.  All I have installed is Global, PNW-CRM-NRM-NCA, FTX Mesh, A2A 182, GTN 750,  Mytraffic 6, Active Sky Next (latest release), Rex Texture Direct with SoftClouds.  That is it

Share this post


Link to post

I would suggest eliminating add-ons one by one to see if one of them was some how installed improperly and caused a memory leak.  Uninstall ASN and see if there's improvement, or MyTraffic, etc.  Are you monitoring the VAS with FSUIPC or Process Explorer to see where the problem starts during the flight?



Doug Miannay

M1mhPJG.png 1BV5Kt7.jpg

PC Specs: i7-8700K (OC 5.0GHz - HT Off) | ASUS Maximus X Hero Z370 | Corsair Hydro H150i Pro Cooler | ASUS STRIX-RTX2080TI-11G | 32GB G.Skill DDR4 TridentZ RGB 4000Hz  | Samsung 960 Pro 512GB M.2 (OS/Apps) | Samsung 960 Pro 1TB M.2 (Sim/Games) | Corsair H1000i PSU | Fractal Design Define R6 Blackout Case | Win10 Pro x64

Addons: Many Orbx Products | Many FSD/FB/FT/PacS/LatinV/Aerosoft Airports | ASP4/ASCA | UTL at 35% | ChasePlane | PMDG/FSL/A2A Aircraft

Share this post


Link to post

I would suggest eliminating add-ons one by one to see if one of them was some how installed improperly and caused a memory leak.  Uninstall ASN and see if there's improvement, or MyTraffic, etc.  Are you monitoring the VAS with FSUIPC or Process Explorer to see where the problem starts during the flight?

 

Hey Doug,

 

Thanks, I will try that suggestion.  Yes, monitoring VAS with FSUIPC and Process Monitor at all times.

 

Most mind boggling experience

Share this post


Link to post
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    22%
    $5,610.00 of $25,000.00 Donate Now
×
×
  • Create New...