Jump to content

Archived

This topic is now archived and is closed to further replies.

MindYerBeak

Xplane 10,41 r 2.hangs,freezes, stutters, (log included)

Recommended Posts

Ok, I posted the following on the x-plane forum but so far  I didn't get any reply so I thought I'd try  posting here hoping some of you can help.

 

Anway My xplane hangs after awhile,restarts, freezes,stutters.The trouble starts  not far away from LOWS after a while I have to  kill it via task manager. i was doing LIPQ SID ADOSA UM736 BZO UM726 KOGOL STAR EDDM ) and  my xplane froze. So I done the flight a few more times and it would freeze more or less always around LOWS. I checked the log.tx but I'm not any wiser. I looked for the words  fail and error. A few popped up  so I disabled  gizmo and  did the flight again. Same thing.The sim would eventually freeze.
My xplane vs 10.41.r2, installed in its own drive g.\x-plane 10.Scenery packages, LIMF;LIML;LIRF all got from the library on here.And also 2 world2xplane sceneries 3 and 4 (central south and central north)  I think. I also have Skymaxxpro vs2.0 .
Plugins :Flywithlua,gndhandling,headshake 1.5 joanpcgroundservices,x-camera,pythoninterface,silverlining,xpuipc.I'm just writing down what i see in my plugins directory.The plane I'm using is the JarA330,(+ the sound that I  bought on the side) .
 
My specs, i7-980x @4.1- zodac gtx580, win7 x64.  Video drivers 337.88 whql.If it helps I installed the gizmo plugin  awhile back not sure why but I removed it.My only plane installed is the jara330.
 
I'm including my log.txt.Any help appreciated.
 
Thanks
 
Log---
 
log.txt for X-Plane 10.41r2 (64-bit build 104101) compiled on Oct  5 2015 17:48:00
X-Plane started on Thu Oct 08 19:37:06 2015
 
This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.
 
Windows 6.1 (build 7601/2) Service Pack 1.0
This is a 64-bit version of Windows.
CPU type: 8664
Physical Memory (total for computer): 6433136640
Maximum Virtual Memory (for X-Plane only): 8796092891136
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
CPU 0: Intel® Core i7 CPU       X 980  @ 3.33GHz  Speed (mhz): 3337
 
X-System folder:'G:\X-Plane 10/', case sensitive=0
 
WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_context_flush_control WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_copy_image WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle 
 
OpenGL Vendor    : NVIDIA Corporation
OpenGL Render    : GeForce GTX 580/PCIe/SSE2
OpenGL Version   : 4.5.0 NVIDIA 358.50 (450/0)
OpenGL Extensions: GL_AMD_multi_draw_indirect GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_conditional_render_inverted GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_2_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_gpu_shader_int64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_parallel_shader_compile GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counter_ops GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_context_flush_control GL_KHR_debug GL_KHR_no_error GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_blend_equation_advanced GL_NV_blend_square GL_NV_command_list GL_NV_compute_program5 GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_internalformat_sample_query GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_uniform_buffer_unified_memory GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NV_shader_thread_group GL_KHR_blend_equation_advanced GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control 
 
threaded_avail   : 1 aniso_avail      : 1 timer_avail      : 1 sync/fence       : 1
pbo_avail        : 1 frameblit_avail  : 1
gpu_shad4_avail  : 1 shad_lod_avail   : 1 array_tex_avail  : 1 texture_rg       : 1
tex_float_avail  : 1 seamless_avail   : 1 drawbuf2_avail   : 1 packed_stencil   : 1
framebuffer_srgb : 1 copy_buf_avail   : 1 ubo_avail        : 1 gshader_avail    : 1
instance_avail   : 1 dis_fog_avail    : 1 pinned_avail     : 0 debug_avail      : 1
max tex units    : 32 (32/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size   : 189.875000
idx in vram      : 1
GLSL Version     :4.50 NVIDIA/450
first-gen shaders: 0
(16/4096/124/192/32/4096/4096)
This video card is: DX10 or 11 - With instancing
CPU count        : 6
OpenAL loaded: Resources/dlls/64/openal32.dll
OpenAL devices: OpenAL Soft
Open AL default device:OpenAL Soft
OpenAL vendor : OpenAL Community
OpenAL renderer  : OpenAL Soft
OpenAL version   : 1.1
OpenAL hardware  : OpenAL Soft
OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFTX_device_clock ALC_SOFTX_HRTF ALC_SOFT_loopback ALC_SOFTX_midi_interface ALC_SOFT_pause_device AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_block_alignment AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFT_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points AL_SOFT_MSADPCM AL_SOFT_source_latency AL_SOFT_source_length
 
Fetching plugins for G:\X-Plane 10/Resources/plugins
 
Loaded: G:\X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).
 
FlyWithLua: Your system path is G:\X-Plane 10/
FlyWithLua: Plugin Dir: G:\X-Plane 10/Resources/plugins/FlyWithLua
FlyWithLua: Plugin Scripts Dir: G:\X-Plane 10/Resources/plugins/FlyWithLua/Scripts
Loaded: G:\X-Plane 10/Resources/plugins/FlyWithLua/64/win.xpl (CarstenLynker.FlyWithLua).
 
Gizmo64: v14.12.31.0101 Windows Starting up...
built: Jun 12 2015, 02:51:49
Gizmo64: X-Plane Folder: (G:/X-Plane 10/)
Gizmo64: Loading..
Gizmo64: Graphics Init..
Gizmo64: Finding Common DataRefs..
Gizmo64: Creating menus..
Gizmo64: XPluginStart() complete.
Loaded: G:\X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl (gizmo.x-plugins.com).
 
Ground Handling Plugin by JARDesign v.090915 for X-Plane 10
GndHandling: G:\X-Plane 10\Resources\plugins\GndHandling\updlist.txt file updated.
Loaded: G:\X-Plane 10/Resources/plugins/GndHandling/win.xpl (jardesign.crew.ground.handling).
 
Loaded: G:\X-Plane 10/Resources/plugins/HeadShakev1.5/64/win.xpl (com.simcoders.headshake).
 
PythonInterfaceVersionNumber = 2.73.06
 
*** PYTHONINTERFACE ERROR ***
Path :- G:\X-Plane 10\Resources\plugins\PythonScripts\*.* does not exist.
You will need to create a folder called PythonScripts under the plugins folder
*** PYTHONINTERFACE ERROR ***
 
Loaded: G:\X-Plane 10/Resources/plugins/PythonInterface/64/win.xpl (sandybarbour.projects.pythoninterface).
 
Loaded: G:\X-Plane 10/Resources/plugins/SilverLining/64/win.xpl (SilverLining.Clouds).
 
X-Camera: License file G:\X-Plane 10\Resources\plugins\X-Camera\license.txt not found, X-Camera will run in limited mode
X-Camera: Initilization complete for version 2.0
Loaded: G:\X-Plane 10/Resources/plugins/X-Camera/64/win.xpl (SRS/X-Camera).
 
Loaded: G:\X-Plane 10/Resources/plugins/XPUIPC/64/win.xpl (XPUIPC/XPWideFS.).
 
Gizmo64: Plugin Enable..
Gizmo64: Init http thread..
Gizmo64: Init Mapping..
Gizmo64: Init cURL.
Gizmo64: Calling gizmo_Start().
Gizmo64: OpenAL: Using shared OpenAL context..
Gizmo64: Machine ID:(44591b90376c54e427a7e796cdd42361)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (plugins/EZ-DRM/Icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (CRJ200_icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)
Gizmo64: LoadFirmware() completed.
Gizmo64: Register Callbacks..
Gizmo64: Register key sniffer..
Gizmo64: Building Mouse Trap..
Gizmo64: Plugin Enabled.
SkyMaxx Pro: SilverLining initialized OK.
Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
  0 Custom Scenery/KSEA Demo Area/
  1 Custom Scenery/LIMF_Scenery_Pack/
  2 Custom Scenery/LIML_Scenery_Pack/
  3 Custom Scenery/LIRF_Scenery_Pack/
  4 Custom Scenery/LOWI Demo Area/
  5 Custom Scenery/Aerosoft - EBBR Brussels/
  6 Custom Scenery/Aerosoft - EDDF Frankfurt/
  7 Custom Scenery/Aerosoft - EDDM Munich/
  8 Custom Scenery/Aerosoft - EDDT Berlin Tegel/
  9 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
 10 Custom Scenery/Aerosoft - EGBB Birmingham/
 11 Custom Scenery/Aerosoft - EGKK London-Gatwick/
 12 Custom Scenery/Aerosoft - EGLL Heathrow/
 13 Custom Scenery/Aerosoft - EGPF Glasgow/
 14 Custom Scenery/Aerosoft - EGSS London-Stansted/
 15 Custom Scenery/Aerosoft - EIDW Dublin/
 16 Custom Scenery/Aerosoft - LEBL Barcelona/
 17 Custom Scenery/Aerosoft - LEMD Madrid/
 18 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
 19 Custom Scenery/Aerosoft - LFPG Paris CDG/
 20 Custom Scenery/Aerosoft - LFPO Paris Orly/
 21 Custom Scenery/Aerosoft - LPFR Faro/
 22 Custom Scenery/Aerosoft - LSGG Genf/
 23 Custom Scenery/Global Airports/
 24 Custom Scenery/w2xp_Europe_3_Central-North/
 25 Custom Scenery/w2xp_Europe_4_Central-South/
 26 Custom Scenery/w2xp_world-models/
 27 Custom Scenery/zzz_Treelines_Farms_Europe_v2/
 28 Custom Scenery/KSEA Demo Terrain/
 29 Custom Scenery/Europe_Library/
 30 Custom Scenery/OpenSceneryX/
 31 Custom Scenery/R2_Library/
 32 Custom Scenery/ff_library_extended_LOD_2/
 33 Global Scenery/Bug Fixes/
 34 Global Scenery/Recuts 1030/
 35 Global Scenery/X-Plane 10 Global Scenery/
 36 Resources/default scenery/1000 autogen/
 37 Resources/default scenery/1000 decals/
 38 Resources/default scenery/1000 forests/
 39 Resources/default scenery/1000 roads/
 40 Resources/default scenery/1000 urban terrain/
 41 Resources/default scenery/1000 world terrain/
 42 Resources/default scenery/700 roads/
 43 Resources/default scenery/900 beaches/
 44 Resources/default scenery/900 europe objects/
 45 Resources/default scenery/900 forests/
 46 Resources/default scenery/900 roads/
 47 Resources/default scenery/900 us objects/
 48 Resources/default scenery/900 world object placeholders/
 49 Resources/default scenery/airport decals/
 50 Resources/default scenery/airport scenery/
 51 Resources/default scenery/default apt dat/
 52 Resources/default scenery/default atc/
 53 Resources/default scenery/sim objects/
 
ATC audio initialized.
0:00:00.000 D/HID: HID Bridge Running
0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 1.
0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.
0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.
0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.
0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.
0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.
0:00:00.000 I/REN: Setting |number of trees read from prefs as 2.
0:00:00.000 I/REN: Setting |number of objects read from prefs as 3.
0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.
0:00:00.000 I/REN: Setting |number of cars read from prefs as 2.
0:00:00.000 I/REN: Setting |world detail distance read from prefs as 4.
0:00:00.000 I/REN: Setting |airport detail read from prefs as 3.
0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 0.
0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 1.
0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.
0:00:00.000 I/REN: Setting |shadow detail read from prefs as 1.
0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 2.
0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.
0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.
0:00:00.000 I/REN: Setting |Extended DSF Scenery read from prefs as 1.
0:00:00.000 I/NET: Connessione alla rete locale (LAN) 2 192.168.0.2
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at WSAC and WSSS!
0:00:00.000 W/ATC: Rewrote WSAC atc_ControllerRole_Gnd's freq: 12172 to 11800 for being in conflict!
0:00:00.000 D/State: Received: 0:0
0:00:00.000 D/HID: Hardware ADDED(045e, 0038) - SideWinder Precision 2 Joystick at path \\?\hid#vid_045e&pid_0038#6&1aad1dea&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: SideWinder Precision 2 Joystick - VID:1118PID:56, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x8a386830
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x8a386830
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x8a386830. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x8a386830. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0036) for handle: 0x8a386830. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0035) for handle: 0x8a386830. Min/Max 0 - 255
0:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x8a386830. It has 8 positions.
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: SideWinder Precision 2 Joystick - VID:1118PID:56 Axis #2: device min/max (0.000000 - 255.000000) calib (0.000000 - 0.000000)
0:00:00.000 D/HID: Hardware ADDED(06a3, 0bac) - Saitek Pro Flight Yoke at path \\?\hid#vid_06a3&pid_0bac#7&c3e857f&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Saitek Pro Flight Yoke - VID:1699PID:2988, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 10 (0009, 000b) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 11 (0009, 000c) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 12 (0009, 000d) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 13 (0009, 000e) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 14 (0009, 000f) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 15 (0009, 0010) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 16 (0009, 0011) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 17 (0009, 0012) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 18 (0009, 0013) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 19 (0009, 0014) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 20 (0009, 0015) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 21 (0009, 0016) for handle: 0x8a3872b0
0:00:00.000 D/HID: BUTTON Added Index: 22 (0009, 0017) for handle: 0x8a3872b0
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x8a3872b0. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x8a3872b0. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0034) for handle: 0x8a3872b0. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0033) for handle: 0x8a3872b0. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 4 (0001, 0032) for handle: 0x8a3872b0. Min/Max 0 - 255
0:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x8a3872b0. It has 8 positions.
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #0: device min/max (0.000000 - 1023.000000) calib (0.500489 - 0.500489)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #1: device min/max (0.000000 - 1023.000000) calib (0.500489 - 0.636364)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #2: device min/max (0.000000 - 255.000000) calib (0.501961 - 0.501961)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #3: device min/max (0.000000 - 255.000000) calib (0.501961 - 0.501961)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #4: device min/max (0.000000 - 255.000000) calib (0.501961 - 0.501961)
0:01:28.485 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/a330jar/330_JARDesign/a330.acf
 
Gizmo64: Aircraft Changed..
Gizmo64: Aircraft name: (a330.acf)
Gizmo64: Aircraft path: (G:/X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/)
 
Gizmo64: gizmo_Restart()
Gizmo64: Shutting down Lua VM
Gizmo64: Releasing X-Plane overrides: sim/operation/override/* 
Gizmo64: Reboot count: 0
Gizmo64: OpenAL: Using shared OpenAL context..
Gizmo64: Machine ID:(44591b90376c54e427a7e796cdd42361)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/EZ-DRM/Icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/CRJ200_icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (G:/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)
Gizmo64: LoadFirmware() completed.
Gizmo64: Aircraft  Author: JARDESIGN ©
Gizmo64: Aircraft Descrip: Airbus A330-200 by JARDesign
Gizmo64: Could not find ./scripts/deployment.key
Gizmo64: Community Edition.
Gizmo64: LuaVM: OnKickStart()
Gizmo64: Completed gizmo_Restart
 
X-Camera: Attempting to initialize HeadShake
X-Camera: HeadShake was found and will be enabled
set: 1
X-Camera: TrackIR interface -- initialize OK.
X-Camera: TrackIR Window handle registration was successful.
X-Camera: TrackIR cursor stopped
X-Camera: TrackIR data transmission started
Fetching plugins for G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins
 
Loaded: G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/330/win.xpl (jardesign.a330).
 
SASL: Starting...
X-Plane scriptable avionics library plugin snapshot 2.2.1 20150812 Commercial Edition
Loaded: G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/sasl/64/win.xpl (1-sim.sasl).
 
JARDesign 1D Sound Engine
Loaded: G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/sound1d/win.xpl (jardesign.sound1d).
 
JARDesign 2D Sound Engine
Loaded: G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/sound2d/win.xpl (jardesign.sound2d).
 
JARDesign 3D Sound Engine
Loaded: G:\X-Plane 10/Aircraft/Heavy Metal/a330jar/330_JARDesign/plugins/sound3d/win.xpl (jardesign.sound3d).
 
SASL: Path to panel: G:\X-Plane 10\Aircraft\Heavy Metal\a330jar\330_JARDesign\aircraft.key
SASL: Loading avionics...
SASL INFO: loading panel
SASL INFO: loading first
SASL INFO: loading drf2tbl
SASL INFO: loading sstick
SASL INFO: loading init
SASL INFO: loading animation
SASL INFO: loading reload
SASL INFO: loading rectangle
SASL INFO: loading draw_test
SASL INFO: loading pfdcalc
SASL INFO: loading fadec
SASL INFO: loading adirs
SASL INFO: loading ap
SASL INFO: loading menu
SASL INFO: loading fl_cont
SASL INFO: loading sound_sys1
SASL INFO: loading sound_fo
SASL INFO: loading sound_st
SASL INFO: loading sound_sys2
SASL INFO: loading ground
SASL INFO: loading icerain
SASL INFO: loading radio
SASL INFO: loading phase
SASL INFO: loading view
SASL INFO: loading light
SASL INFO: loading hotstart
SASL INFO: loading textureLit
SASL INFO: loading switchLit
SASL INFO: loading clickable
SASL INFO: loading mcdu_mng
SASL INFO: loading mcdu_acstat
SASL INFO: "mcdu_acstat" version info VER 1.2r1 08.15
SASL INFO: loading mcdu_radnav
SASL INFO: loading mcdu_prf_to
SASL INFO: loading mcdu_prf_clb
SASL INFO: loading mcdu_prf_crz
SASL INFO: loading mcdu_prf_des
SASL INFO: loading mcdu_prf_appr
SASL INFO: loading mcdu_prf_ga
SASL INFO: loading mcdu_int
SASL INFO: loading mcdu_intb
SASL INFO: loading mcdu_data
SASL INFO: loading mcdu_menu
SASL INFO: loading mcdu_prog
SASL INFO: loading mcdu_calc
SASL INFO: including tables.lua
SASL INFO: loading mcdu_fuel
SASL INFO: loading mcdu_draw
SASL INFO: loading gpws
SASL INFO: loading weather
SASL INFO: loading ext_anim
SASL INFO: loading pfddraw
SASL INFO: loading nd
SASL INFO: including magvar.lua
SASL INFO: loading isis
SASL INFO: loading mtr
SASL INFO: loading plate
SASL INFO: loading counter
SASL INFO: loading sys_apu
SASL INFO: loading sys_elec
SASL INFO: loading sys_hyd
SASL INFO: loading sys_bld
SASL INFO: loading sys_cond
SASL INFO: loading sys_drs
SASL INFO: loading sys_oxy
SASL INFO: loading sys_press
SASL INFO: loading sys_whl
SASL INFO: loading sys_fctl
SASL INFO: loading sys_fuel
SASL INFO: loading dr_refuel
SASL INFO: loading dr_sheet
SASL INFO: loading sys_eng
SASL INFO: loading sys_eng_sys
SASL INFO: loading sys_flaps
SASL INFO: loading sys_fwc_nor
SASL INFO: loading sys_fwc_abn
SASL INFO: including abn_table.lua
SASL INFO: loading dr_panel
SASL INFO: loading mcdu_fpln
SASL INFO: including magvar.lua
SASL INFO: including perfom.lua
SASL INFO: including tables.lua
SASL INFO: loading sys_bott
SASL INFO: loading sys_wait
SASL INFO: loading gnd_tow
SASL INFO: loading perf_test
SASL INFO: loading planshet
SASL INFO: including chklst01.lua
SASL INFO: including chklst02.lua
SASL INFO: including chklst03.lua
SASL INFO: including chklst04.lua
SASL INFO: including chklst05.lua
SASL INFO: including chklst06.lua
SASL INFO: including chklst07.lua
SASL INFO: including chklst08.lua
SASL INFO: including chklst09.lua
SASL INFO: including chklst10.lua
SASL INFO: loading bbox
SASL INFO: loading audio
SASL INFO: loading pax_text
SASL INFO: loading cab_text
SASL INFO: loading mech_text
SASL INFO: loading mcdu_res
SASL INFO: loading sys_dnd_lght
SASL INFO: loading sys_upd_lght
SASL INFO: loading last
SASL INFO: Avionics loaded
0:01:28.485 I/FLT: Init dat_p0 type:loc_ram apt:LIPQ rwy:09
0:01:28.485 W/OBJ: The object Custom Scenery/w2xp_world-models/houses/EU/RES_38.00x12.00_RED1.obj has a first LOD near distance of 5500.000000 but it should start at 0!
0:01:28.485 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:01:28.485 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Vintage_Airports/Control_Towers/'.
0:01:28.485 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:01:28.485 W/OBJ: The object Custom Scenery/w2xp_world-models/houses/EU/RES_38.00x12.00_BLACK1.obj has a first LOD near distance of 5500.000000 but it should start at 0!
0:01:28.485 I/SCN: DSF load time: 5259022 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+44+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 7207624 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+44+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 38708 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+44+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 7508231 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+46+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 7518227 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+46+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 2490047 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+44+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 248605 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 623724 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+44+013.dsf (16718 tris)
0:01:28.485 I/SCN: DSF load time: 450078 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 46894 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+44+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 6145 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+44+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 678043 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+44+014.dsf (87060 tris)
0:01:28.485 I/SCN: DSF load time: 1924115 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+44+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 3136460 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+011.dsf (266554 tris)
0:01:28.485 I/SCN: DSF load time: 2955403 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+013.dsf (258535 tris)
0:01:28.485 I/SCN: DSF load time: 289844 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+45+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 2816389 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+44+011.dsf (191353 tris)
0:01:28.485 I/SCN: DSF load time: 837406 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+45+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 435431 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+45+013.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 3644481 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+45+013.dsf (156398 tris)
0:01:28.485 I/SCN: DSF load time: 35529 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 1098564 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+45+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 519815 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+45+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 2291036 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 303756 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 670438 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+44+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 641629 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+44+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 123731 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+44+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 1967187 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+45+014.dsf (162023 tris)
0:01:28.485 I/SCN: DSF load time: 990168 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+44+012.dsf (119272 tris)
0:01:28.485 I/SCN: DSF load time: 2289499 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+012.dsf (304300 tris)
0:01:28.485 I/SCN: DSF load time: 636322 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+46+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 476665 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+014.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 39286 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+45+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 1955985 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+45+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 2515680 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+014.dsf (192748 tris)
0:01:28.485 I/SCN: DSF load time: 1095719 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+45+011.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 3590194 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+45+011.dsf (249321 tris)
0:01:28.485 I/SCN: DSF load time: 130750 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+45+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 1383250 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+45+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 1800600 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+45+012.dsf (0 tris)
0:01:28.485 I/SCN: DSF load time: 2483313 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+45+012.dsf (190846 tris)
FlyWithLua: User switched to a new airport (or changed the plane). Script files have to be reloaded.
FlyWithLua Info: Lua engine (re)started. LUA_RUN = 1, SDK_VERSION = 210, XPLANE_VERSION = 10410, XPLANE_LANGUAGE = English and XPLANE_HOSTID = 1
FlyWithLua Info: HID access initialized.
FlyWithLua Info: Discovered 10 HID devices.
FlyWithLua Info: Load ini file.
FlyWithLua Info: Searching for Lua script files
FlyWithLua Info: Sorting Lua script files
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
RTH_prefs_1.txt LOADED
FlyWithLua Error: nothing to say.
RTH_prefs_1.txt SAVED
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: All script files loaded successfully.
FlyWithLua Info: Loading time for all scripts is 0.34 sec.
0:03:14.421 D/State: Received: 0:6
0:03:15.120 I/ACF: Loading airplane number 1 with Aircraft/Helicopters/Bell 206/Jetranger.acf
X-Camera: TrackIR has been shutdown
set: 0
set: 1
X-Camera: TrackIR interface -- initialize OK.
X-Camera: TrackIR Window handle registration was successful.
X-Camera: TrackIR cursor stopped
X-Camera: TrackIR data transmission started
0:03:15.120 I/FLT: Init dat_p1 type:loc_general_area lat:46.443939 lon:13.608775 ele(ft):18140.925781 psi:83.828239 spd(kts):40.322784
0:03:15.120 I/ACF: Loading airplane number 2 with Aircraft/General Aviation/Baron B58/Baron_58.acf
X-Camera: TrackIR has been shutdown
set: 0
set: 1
X-Camera: TrackIR interface -- initialize OK.
X-Camera: TrackIR Window handle registration was successful.
X-Camera: TrackIR cursor stopped
X-Camera: TrackIR data transmission started
0:03:15.120 I/FLT: Init dat_p2 type:loc_general_area lat:46.657047 lon:13.622365 ele(ft):3546.931641 psi:43.968628 spd(kts):114.530548
0:03:15.120 I/ACF: Loading airplane number 3 with Aircraft/Helicopters/Bell 206/Jetranger.acf
X-Camera: TrackIR has been shutdown
set: 0
set: 1
X-Camera: TrackIR interface -- initialize OK.
X-Camera: TrackIR Window handle registration was successful.
X-Camera: TrackIR cursor stopped
X-Camera: TrackIR data transmission started
0:03:15.120 I/FLT: Init dat_p3 type:loc_general_area lat:46.424244 lon:13.213171 ele(ft):12324.422852 psi:54.318066 spd(kts):18.080315
0:03:15.120 E/FLT: Init dat_p1 type:loc_ram HAD BOGUS RUNWAY! apt:LIPQ rwy:1 dir:0
0:03:15.120 I/ATC: p1(N01XP) FP filed - LIPQ to EFHF at 9000 via GRZ OKF OKX LAW DAR KAL VSB NTL RUS , type=2
0:03:15.120 I/ATC: p2(N02XP) Popup FP filed to LIPQ at 5000 via , type=2
0:03:15.120 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 6.915069 maxDescent: 1000 maxAlt: 3000 minAlt: 5000 chosen_alt: 3000
0:03:15.120 W/ATC: Setting route alt to 3000 because they filed too high for a descent!
0:03:15.120 D/ATC: p2(N02XP): Cleared IFR
0:03:15.120 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.809856 lon:13.261571 ele(ft):5000.000000 psi:79.000000 spd(kts):167.250015
0:03:15.120 D/ATC: p2(N02XP): FlyToPoints
0:03:15.120 D/ATC: p2(N02XP): Maintain 2998ft
0:03:15.120 E/FLT: Init dat_p3 type:loc_ram HAD BOGUS RUNWAY! apt:LIPQ rwy:5 dir:0
0:03:15.120 I/ATC: p3(N03XP) FP filed - LIPQ to EFHF at 9000 via GRZ OKF OKX LAW DAR KAL VSB NTL RUS , type=2
Sound3d: Custom soundpack will use G:\X-Plane 10\Aircraft\Heavy Metal\a330jar\330_JARDesign\plugins\sound3d\custom/set.ini
3Dsound Engine by JARDesign v.1.4
!!!Missing Data
2Dsound Engine by JARDesign v.1.0
1Dsound Engine by JARDesign v.1.3
Gizmo64: OpenGL<->Physics Offset Default Init: 37651.898, -201.999, -35993.664
Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!
SkyMaxx Pro: Location set to lat 82.499900 lon 82.999870 alt 0.057890
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cirrus layer alt 9000.000000 thickness 0.000000
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 100.000000
fboStatus=36055
0:03:25.780 D/ATC: p2(N02XP): Fly Heading: 60
0:03:25.780 D/ATC: p2(N02XP): Maintain 1998ft
0:03:25.780 D/ATC: Validating altitude for p3(N03XP): filed: 9000 usable_rte_dist: 902.911926 maxDescent: 225000 maxAlt: 225000 minAlt: 9000 chosen_alt: 9000
0:03:25.780 D/ATC: p3(N03XP): Cleared IFR
0:03:25.780 W/ATC: Frequency 13020 for flow 09 ATC Flow runway 09 at LIPQ seemed invalid and was overwriten!
0:03:25.780 D/ATC: p3(N03XP): Squawk 4700
SkyMaxx Pro: Location set to lat 45.822103 lon 13.485413 alt 13.177632
0:03:26.595 D/ATC: Validating altitude for p1(N01XP): filed: 9000 usable_rte_dist: 903.066406 maxDescent: 225000 maxAlt: 225000 minAlt: 9000 chosen_alt: 9000
0:03:26.595 D/ATC: p1(N01XP): Cleared IFR
0:03:26.595 D/ATC: p1(N01XP): Squawk 4701
0:03:27.505 D/ATC: p3(N03XP): Taxi (14 points issued)
0:03:27.524 D/ATC: p1(N01XP): Taxi (10 points issued)
0:03:46.666 D/ATC: p2(N02XP): Fly Heading: 90
0:03:46.666 D/ATC: p2(N02XP): Report Field in Sight
0:03:46.766 I/ATC: Adding p2(N02XP) into Active Queue
0:03:46.766 D/ATC: p2(N02XP): Contact controller on 130.20
0:03:46.766 D/ATC: p2(N02XP): FlyToPoints
0:03:46.766 D/ATC: p2(N02XP): Cleared VIS approach!
0:03:46.832 D/ATC: p2(N02XP): Switching frequency to 130.20
0:03:46.832 I/ATC: Tower, N02XP, Checking in.
0:03:46.832 E/ATC: Tried playing a wave file that doesn't exist: 'checking_in.wav'
0:04:29.898 I/ATC: Airport flow changed at LJDI!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LJDI CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LJDI. Advancing...
0:04:29.898 I/ATC: Changing LJDI CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LJDI. Advancing...
0:04:29.898 I/ATC: Changing LJDI CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LDRG!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LDRG CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LDRG. Advancing...
0:04:29.898 I/ATC: Changing LDRG CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LDRG. Advancing...
0:04:29.898 I/ATC: Changing LDRG CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LIPS!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LIPS CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LIPS. Advancing...
0:04:29.898 I/ATC: Changing LIPS CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LIPS. Advancing...
0:04:29.898 I/ATC: Changing LIPS CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LOWK!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LOWK CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LOWK. Advancing...
0:04:29.898 I/ATC: Changing LOWK CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LOWK. Advancing...
0:04:29.898 I/ATC: Changing LOWK CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LJLJ!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LJLJ CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LJLJ. Advancing...
0:04:29.898 I/ATC: Changing LJLJ CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LJLJ. Advancing...
0:04:29.898 I/ATC: Changing LJLJ CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LJPZ!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LJPZ CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LJPZ. Advancing...
0:04:29.898 I/ATC: Changing LJPZ CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LJPZ. Advancing...
0:04:29.898 I/ATC: Changing LJPZ CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LDPL!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LDPL CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LDPL. Advancing...
0:04:29.898 I/ATC: Changing LDPL CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LDPL. Advancing...
0:04:29.898 I/ATC: Changing LDPL CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LDRI!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LDRI CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LDRI. Advancing...
0:04:29.898 I/ATC: Changing LDRI CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LDRI. Advancing...
0:04:29.898 I/ATC: Changing LDRI CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LIPI!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LIPI CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LIPI. Advancing...
0:04:29.898 I/ATC: Changing LIPI CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LIPI. Advancing...
0:04:29.898 I/ATC: Changing LIPI CabState from 2 to 0
0:04:29.898 I/ATC: Airport flow changed at LIPH!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: North
0:04:29.898 I/ATC: Changing LIPH CabState from 0 to 1
0:04:29.898 I/ATC: All departures are done at LIPH. Advancing...
0:04:29.898 I/ATC: Changing LIPH CabState from 1 to 2
0:04:29.898 I/ATC: All arrivals are done at LIPH. Advancing...
0:04:29.898 I/ATC: Changing LIPH CabState from 2 to 0
0:04:57.264 I/FLT: Init dat_p0 type:loc_tak apt:LIPQ rwy:27
FlyWithLua: User switched to a new airport (or changed the plane). Script files have to be reloaded.
FlyWithLua Info: Load exit file.
FlyWithLua Info: Lua engine (re)started. LUA_RUN = 2, SDK_VERSION = 210, XPLANE_VERSION = 10410, XPLANE_LANGUAGE = English and XPLANE_HOSTID = 1
FlyWithLua Info: HID access initialized.
FlyWithLua Info: Discovered 10 HID devices.
FlyWithLua Info: Load ini file.
FlyWithLua Info: Searching for Lua script files
FlyWithLua Info: Sorting Lua script files
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
RTH_prefs_1.txt LOADED
FlyWithLua Error: nothing to say.
RTH_prefs_1.txt SAVED
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: All script files loaded successfully.
FlyWithLua Info: Loading time for all scripts is 0.24 sec.
JARDesign Ground Handling 3D Sound Engine Disable 
0:07:33.760 D/ATC: p2(N02XP): Land: 09
0:07:33.760 I/ATC: N02XP, Runway 09, you're cleared to land.
0:07:38.893 I/ATC: Runway 09, cleared to land, N02XP.
0:08:01.676 I/ATC: N02XP, Gate Ramp 7 taxi via  09 B F E .
0:08:01.676 E/ATC: Tried playing a wave file that doesn't exist: 'Ramp'
0:08:01.676 E/ATC: Tried playing a wave file that doesn't exist: '7'
0:08:01.676 D/ATC: p2(N02XP): Taxi (13 points issued)
0:08:08.143 I/ATC: Gate Ramp 7 taxi via  09 B F E , N02XP.
0:08:08.143 E/ATC: Tried playing a wave file that doesn't exist: 'Ramp'
0:08:08.143 E/ATC: Tried playing a wave file that doesn't exist: '7'
0:08:16.392 I/ATC: Removing p2(N02XP) from Active Queue
0:08:16.392 W/ATC: p2(N02XP): Wrist Slap!
0:08:16.392 I/ATC: p2(N02XP) Popup FP filed to LIPQ at 5000 via , type=2
0:08:16.392 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 9.024229 maxDescent: 2000 maxAlt: 3000 minAlt: 5000 chosen_alt: 3000
0:08:16.392 W/ATC: Setting route alt to 3000 because they filed too high for a descent!
0:08:16.392 D/ATC: p2(N02XP): Cleared IFR
0:08:16.392 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.924522 lon:13.698275 ele(ft):5000.000000 psi:235.000000 spd(kts):167.250015
0:08:16.392 D/ATC: p2(N02XP): FlyToPoints
0:08:16.392 D/ATC: p2(N02XP): Maintain 2998ft
0:08:16.426 D/ATC: p2(N02XP): Fly Heading: 295
0:08:16.426 D/ATC: p2(N02XP): Maintain 5000ft
0:08:56.625 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 5000.000000, Cur_Indi: 3551.284912, Cur_Pres: 3551.284912, Last: 5325.388672
0:08:56.625 D/ATC: p2(N02XP): Maintain 5000ft
0:09:26.691 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 5000.000000, Cur_Indi: 1326.056519, Cur_Pres: 1326.056519, Last: 3551.284912
0:09:26.691 D/ATC: p2(N02XP): Maintain 5000ft
0:09:48.391 W/ATC: p2(N02XP): Wrist Slap!
0:09:48.391 I/ATC: p2(N02XP) Popup FP filed to LIMF at 10000 via 4556N01312E BSA CSL , type=2
0:09:48.391 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 217.797760 maxDescent: 54000 maxAlt: 55000 minAlt: 10000 chosen_alt: 10000
0:09:48.391 D/ATC: p2(N02XP): Cleared IFR
0:09:48.391 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.074181 lon:14.003599 ele(ft):10000.000000 psi:256.710846 spd(kts):167.250015
0:09:48.391 D/ATC: p2(N02XP): FlyToPoints
0:09:48.391 D/ATC: p2(N02XP): Maintain 10000ft
0:10:29.007 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 10000.000000, Cur_Indi: 8227.191406, Cur_Pres: 8227.191406, Last: 10147.317383
0:10:29.007 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Altitude set to 1013.302230
0:10:59.122 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 10000.000000, Cur_Indi: 5814.918945, Cur_Pres: 5814.918945, Last: 8227.191406
0:10:59.122 D/ATC: p2(N02XP): Maintain 10000ft
0:11:29.205 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 10000.000000, Cur_Indi: 3392.116455, Cur_Pres: 3392.116943, Last: 5814.918945
0:11:29.205 D/ATC: p2(N02XP): Maintain 10000ft
0:11:50.571 W/ATC: p2(N02XP): Wrist Slap!
0:11:50.571 I/ATC: p2(N02XP) Popup FP filed to EDAE at 9000 via 4553N01305E SBG OKG KLF , type=2
0:11:50.571 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 351.194702 maxDescent: 87000 maxAlt: 87000 minAlt: 9000 chosen_alt: 9000
0:11:50.571 D/ATC: p2(N02XP): Cleared IFR
0:11:50.571 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.515972 lon:13.126275 ele(ft):9000.000000 psi:356.311768 spd(kts):167.250015
0:11:50.571 D/ATC: p2(N02XP): FlyToPoints
0:11:50.571 D/ATC: p2(N02XP): Maintain 8999ft
SkyMaxx Pro: Altitude set to 2013.346339
0:12:15.321 I/ATC: p2(N02XP) Popup FP filed to EDAK at 10000 via 4547N01342E GRZ OKF HDO , type=2
0:12:15.321 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 328.188995 maxDescent: 82000 maxAlt: 82000 minAlt: 10000 chosen_alt: 10000
0:12:15.321 D/ATC: p2(N02XP): Cleared IFR
0:12:15.321 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.510925 lon:13.305540 ele(ft):10000.000000 psi:44.763416 spd(kts):167.250015
0:12:15.321 D/ATC: p2(N02XP): FlyToPoints
0:12:15.321 D/ATC: p2(N02XP): Maintain 10000ft
0:19:59.460 I/ATC: p2(N02XP) Popup FP filed to EDBC at 10000 via 4607N01332E SBG BAY MAG , type=2
0:19:59.460 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 318.543762 maxDescent: 79000 maxAlt: 80000 minAlt: 10000 chosen_alt: 10000
0:19:59.460 D/ATC: p2(N02XP): Cleared IFR
0:19:59.460 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.589771 lon:13.720703 ele(ft):10000.000000 psi:346.554871 spd(kts):167.250015
0:19:59.460 D/ATC: p2(N02XP): FlyToPoints
0:19:59.460 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Altitude set to 3013.679950
0:20:28.893 I/ATC: p2(N02XP) Popup FP filed to EDES at 10000 via 4611N01331E SBG DKB , type=2
0:20:28.893 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 278.631287 maxDescent: 69000 maxAlt: 69000 minAlt: 10000 chosen_alt: 10000
0:20:28.893 D/ATC: p2(N02XP): Cleared IFR
0:20:28.893 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.632839 lon:13.725600 ele(ft):10000.000000 psi:346.249725 spd(kts):167.250015
0:20:28.893 D/ATC: p2(N02XP): FlyToPoints
0:20:28.893 D/ATC: p2(N02XP): Maintain 10000ft
0:20:54.132 I/SCN: DSF load time: 1613416 for file Custom Scenery/LOWI Demo Area/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:20:57.589 I/ATC: p2(N02XP) Popup FP filed to EDCD at 9000 via 4613N01337E LNZ NER , type=2
0:20:57.589 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 303.168671 maxDescent: 75000 maxAlt: 75000 minAlt: 9000 chosen_alt: 9000
0:20:57.589 D/ATC: p2(N02XP): Cleared IFR
0:20:57.589 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.634640 lon:13.489470 ele(ft):9000.000000 psi:8.588526 spd(kts):167.250015
0:20:57.589 D/ATC: p2(N02XP): FlyToPoints
0:20:57.589 D/ATC: p2(N02XP): Maintain 8999ft
0:21:00.708 I/SCN: DSF load time: 8173320 for file Custom Scenery/w2xp_Europe_3_Central-North/Earth nav data/+40+010/+47+013.dsf (0 tris)
0:21:03.904 I/SCN: DSF load time: 9756007 for file Custom Scenery/w2xp_Europe_3_Central-North/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:21:04.887 I/SCN: DSF load time: 4151977 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+47+013.dsf (0 tris)
0:21:05.095 I/SCN: DSF load time: 1183524 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:21:05.431 I/SCN: DSF load time: 506886 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+013.dsf (0 tris)
0:21:06.248 I/SCN: DSF load time: 980169 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:21:09.808 I/SCN: DSF load time: 4026436 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+013.dsf (252460 tris)
0:21:10.176 I/SCN: DSF load time: 3632153 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+011.dsf (274956 tris)
0:21:11.875 I/SCN: DSF load time: 311925 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+47+014.dsf (0 tris)
0:21:12.144 I/SCN: DSF load time: 282787 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+014.dsf (0 tris)
0:21:12.583 I/SCN: DSF load time: 74551 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:21:13.195 I/SCN: DSF load time: 625524 for file Custom Scenery/w2xp_Europe_3_Central-North/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:21:14.341 I/SCN: DSF load time: 1908958 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+014.dsf (200123 tris)
0:21:14.341 I/SCN: DSF load time: 1121769 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:21:15.242 I/SCN: DSF load time: 813993 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:21:18.365 I/SCN: DSF load time: 2826483 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+012.dsf (255810 tris)
0:21:22.041 I/ATC: p2(N02XP) Popup FP filed to LKPO at 9000 via 4601N01328E GRZ JAN , type=2
0:21:22.041 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 248.308075 maxDescent: 62000 maxAlt: 63000 minAlt: 9000 chosen_alt: 9000
0:21:22.041 D/ATC: p2(N02XP): Cleared IFR
0:21:22.041 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.792316 lon:13.005686 ele(ft):9000.000000 psi:54.508278 spd(kts):167.250015
0:21:22.041 D/ATC: p2(N02XP): FlyToPoints
0:21:22.041 D/ATC: p2(N02XP): Maintain 8999ft
SkyMaxx Pro: Altitude set to 4013.938503
0:21:49.241 I/ATC: p2(N02XP) Popup FP filed to LFJL at 10000 via 4612N01312E OZE KLO GTQ , type=2
0:21:49.241 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 292.679016 maxDescent: 73000 maxAlt: 74000 minAlt: 10000 chosen_alt: 10000
0:21:49.241 D/ATC: p2(N02XP): Cleared IFR
0:21:49.241 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.094528 lon:14.137368 ele(ft):10000.000000 psi:279.180511 spd(kts):167.250015
0:21:49.241 D/ATC: p2(N02XP): FlyToPoints
0:21:49.241 D/ATC: p2(N02XP): Maintain 10000ft
0:22:29.591 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 10000.000000, Cur_Indi: 8242.644531, Cur_Pres: 8242.644531, Last: 10149.432617
0:22:29.591 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Altitude set to 5014.234903
0:39:55.900 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 10000.000000, Cur_Indi: 5830.914551, Cur_Pres: 5830.914063, Last: 8242.644531
0:39:55.900 D/ATC: p2(N02XP): Maintain 10000ft
0:39:58.366 I/ATC: p1(N01XP) Popup FP filed to LFLC at 10000 via 4618N01345E VIL BLA LSE , type=2
0:39:58.366 D/ATC: Validating altitude for p1(N01XP): filed: 10000 usable_rte_dist: 380.408478 maxDescent: 95000 maxAlt: 96000 minAlt: 10000 chosen_alt: 10000
0:39:58.366 D/ATC: p1(N01XP): Cleared IFR
0:39:58.366 I/FLT: Init dat_p1 type:loc_specify_lle lat:46.426640 lon:14.173851 ele(ft):10000.000000 psi:246.196564 spd(kts):97.759834
0:39:58.366 D/ATC: p1(N01XP): FlyToPoints
0:39:58.366 D/ATC: p1(N01XP): Maintain 10000ft
0:39:59.298 I/ATC: p3(N03XP) Popup FP filed to SAME at 10000 via 4629N01333E TNT VOG CNM FJR CLE CD13 DISVU VTB CDB JRZ VFA SGR ABODA 3409N 3511N KUBIL SNT FUN 3117N 3119N 3121N 3123N 3125N 3127N 3129N 3131N 3133N 3135N 3137N 3139N 3141N 3143N 3145N 3147N 3149N 3151N 3153N 3155N 3157N 3159N 3161N PJM ANU PPR FOF BNE POS GNA CMA 0564N POVLA KEVUP BVI MNS 0560W AROPI 0861W ILTAR JI003 UBSIM PAGUS 1462W LOBON 1659W RBO 2060W VME ITA MTQ TUC TRH LAR JUA , type=2
0:39:59.298 D/ATC: Validating altitude for p3(N03XP): filed: 10000 usable_rte_dist: 7080.058594 maxDescent: 1770000 maxAlt: 1772000 minAlt: 10000 chosen_alt: 10000
0:39:59.298 D/ATC: p3(N03XP): Cleared IFR
0:39:59.298 I/FLT: Init dat_p3 type:loc_specify_lle lat:46.587158 lon:14.075332 ele(ft):10000.000000 psi:254.666412 spd(kts):97.759834
0:39:59.298 D/ATC: p3(N03XP): FlyToPoints
0:39:59.298 D/ATC: p3(N03XP): Maintain 10000ft
0:40:20.033 I/ATC: p2(N02XP) Popup FP filed to EDRE at 10000 via 4610N01344E SBG DKB TAU , type=2
0:40:20.033 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 313.579315 maxDescent: 78000 maxAlt: 79000 minAlt: 10000 chosen_alt: 10000
0:40:20.033 D/ATC: p2(N02XP): Cleared IFR
0:40:20.033 I/FLT: Init dat_p2 type:loc_specify_lle lat:45.945164 lon:13.848282 ele(ft):10000.000000 psi:342.146484 spd(kts):167.250015
0:40:20.033 D/ATC: p2(N02XP): FlyToPoints
0:40:20.033 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Altitude set to 6014.322680
0:40:46.631 I/ATC: p2(N02XP) Popup FP filed to LRAR at 9000 via 4614N01350E ZAG PTB ARD , type=2
0:40:46.631 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 309.656097 maxDescent: 77000 maxAlt: 77000 minAlt: 9000 chosen_alt: 9000
0:40:46.631 D/ATC: p2(N02XP): Cleared IFR
0:40:46.631 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.368370 lon:12.845708 ele(ft):9000.000000 psi:100.009399 spd(kts):167.250015
0:40:46.631 D/ATC: p2(N02XP): FlyToPoints
0:40:46.631 D/ATC: p2(N02XP): Maintain 8999ft
0:41:26.897 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 9000.000000, Cur_Indi: 7307.429199, Cur_Pres: 7307.430176, Last: 9202.766602
0:41:26.897 D/ATC: p2(N02XP): Maintain 8999ft
0:41:29.863 I/ATC: p2(N02XP) Popup FP filed to ETAR at 10000 via 4640N01330E MUN LBU , type=2
0:41:29.863 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 267.491699 maxDescent: 66000 maxAlt: 67000 minAlt: 10000 chosen_alt: 10000
0:41:29.863 D/ATC: p2(N02XP): Cleared IFR
0:41:29.863 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.161026 lon:14.050061 ele(ft):10000.000000 psi:323.100708 spd(kts):167.250015
0:41:29.863 D/ATC: p2(N02XP): FlyToPoints
0:41:29.863 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Altitude set to 7014.671947
0:42:00.563 I/ATC: p2(N02XP) Popup FP filed to LIBA at 9000 via 4634N01349E PUL SPL FGG , type=2
0:42:00.563 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 309.645203 maxDescent: 77000 maxAlt: 77000 minAlt: 9000 chosen_alt: 9000
0:42:00.563 D/ATC: p2(N02XP): Cleared IFR
0:42:00.563 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.989407 lon:13.818096 ele(ft):9000.000000 psi:177.477783 spd(kts):167.250015
0:42:00.563 D/ATC: p2(N02XP): FlyToPoints
0:42:00.563 D/ATC: p2(N02XP): Maintain 8999ft
0:42:42.212 W/ATC: p2(N02XP): Wrist Slap!
0:42:42.212 I/ATC: p2(N02XP) Popup FP filed to LFOK at 10000 via 4651N01343E MAH WUR SAV MMD , type=2
0:42:42.212 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 418.484222 maxDescent: 104000 maxAlt: 105000 minAlt: 10000 chosen_alt: 10000
0:42:42.212 D/ATC: p2(N02XP): Cleared IFR
0:42:42.212 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.532505 lon:14.244842 ele(ft):10000.000000 psi:311.241516 spd(kts):167.250015
0:42:42.212 D/ATC: p2(N02XP): FlyToPoints
0:42:42.212 D/ATC: p2(N02XP): Maintain 10000ft
0:43:20.378 I/ATC: p2(N02XP) Popup FP filed to EPWA at 9000 via 4655N01328E SNU SLC KAX OKC , type=2
0:43:20.378 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 416.056335 maxDescent: 104000 maxAlt: 104000 minAlt: 9000 chosen_alt: 9000
0:43:20.378 D/ATC: p2(N02XP): Cleared IFR
0:43:20.378 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.694912 lon:12.851238 ele(ft):9000.000000 psi:62.015106 spd(kts):167.250015
0:43:20.378 D/ATC: p2(N02XP): FlyToPoints
0:43:20.378 D/ATC: p2(N02XP): Maintain 8999ft
0:43:43.727 I/ATC: p1(N01XP) Popup FP filed to LFSC at 10000 via 4642N01325E MAH TRA , type=2
0:43:43.727 D/ATC: Validating altitude for p1(N01XP): filed: 10000 usable_rte_dist: 256.751373 maxDescent: 64000 maxAlt: 65000 minAlt: 10000 chosen_alt: 10000
0:43:43.727 D/ATC: p1(N01XP): Cleared IFR
0:43:43.727 I/FLT: Init dat_p1 type:loc_specify_lle lat:46.343227 lon:13.910749 ele(ft):10000.000000 psi:317.737366 spd(kts):97.759834
0:43:43.727 D/ATC: p1(N01XP): FlyToPoints
0:43:43.727 D/ATC: p1(N01XP): Maintain 10000ft
0:44:00.993 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 9000.000000, Cur_Indi: 7318.232422, Cur_Pres: 7318.232422, Last: 9206.768555
0:44:00.993 D/ATC: p2(N02XP): Maintain 8999ft
0:44:01.393 I/ATC: p1(N01XP) Popup FP filed to LFSC at 10000 via 4648N01321E MAH TRA , type=2
0:44:01.393 D/ATC: Validating altitude for p1(N01XP): filed: 10000 usable_rte_dist: 255.460052 maxDescent: 63000 maxAlt: 64000 minAlt: 10000 chosen_alt: 10000
0:44:01.393 D/ATC: p1(N01XP): Cleared IFR
0:44:01.393 I/FLT: Init dat_p1 type:loc_specify_lle lat:46.390568 lon:13.928776 ele(ft):10000.000000 psi:316.832306 spd(kts):97.759834
0:44:01.393 D/ATC: p1(N01XP): FlyToPoints
0:44:01.393 D/ATC: p1(N01XP): Maintain 10000ft
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cumulus congestus layer alt 1752.000000 size 50000.000000 density 0.500000
SkyMaxx Pro: Created cumulus congestus layer alt 2361.000000 size 50000.000000 density 0.333333
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 93723.023438
0:44:40.259 I/ATC: p1(N01XP) Popup FP filed to SBBP at 10000 via 4702N01323E TNT VOG CNM FJR CLE MJV BAVER VSJ ORA ARI MKS SLK MAK GLM TNN MBA LAY LALTO BAMEL LGM UDATI 2518N 2419N 2320N 2322N TENPA CVS SNT 1525N 1527N 1529N 1427N 1429N APOXA 1131N 1133N 1135N 1137N 1139N 1141N 1143N 1145N BISUK 0947N 0845N 0746N 0647N 0447N BEL TUI CJS 0850W PMS PNC RUSTE FRM LUZ ULD RPR BGC , type=2
0:44:40.259 D/ATC: Validating altitude for p1(N01XP): filed: 10000 usable_rte_dist: 5706.391602 maxDescent: 1426000 maxAlt: 1429000 minAlt: 10000 chosen_alt: 10000
0:44:40.259 D/ATC: p1(N01XP): Cleared IFR
0:44:40.259 I/FLT: Init dat_p1 type:loc_specify_lle lat:47.233025 lon:13.836418 ele(ft):10000.000000 psi:237.148407 spd(kts):97.759834
0:44:40.259 D/ATC: p1(N01XP): FlyToPoints
0:44:40.259 D/ATC: p1(N01XP): Maintain 10000ft
0:44:41.275 W/ATC: p2(N02XP): Wrist Slap!
0:44:41.275 I/ATC: p2(N02XP) Popup FP filed to EBWE at 10000 via 4649N01322E MAH KRH KBO , type=2
0:44:41.275 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 386.322845 maxDescent: 96000 maxAlt: 96000 minAlt: 10000 chosen_alt: 10000
0:44:41.275 D/ATC: p2(N02XP): Cleared IFR
0:44:41.275 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.424839 lon:13.913211 ele(ft):10000.000000 psi:316.489380 spd(kts):167.250015
0:44:41.275 D/ATC: p2(N02XP): FlyToPoints
0:44:41.275 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Location set to lat 46.822118 lon 13.515008 alt 7635.452321
0:44:51.993 I/ATC: Airport flow changed at LOWS!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:44:51.993 I/ATC: Changing LOWS CabState from 0 to 1
0:44:51.993 I/ATC: All departures are done at LOWS. Advancing...
0:44:51.993 I/ATC: Changing LOWS CabState from 1 to 2
0:44:51.993 I/ATC: All arrivals are done at LOWS. Advancing...
0:44:51.993 I/ATC: Changing LOWS CabState from 2 to 0
0:45:01.226 I/ATC: p2(N02XP) Popup FP filed to LFOA at 10000 via 4703N01310E KPT GRE DJL NEV , type=2
0:45:01.226 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 379.075989 maxDescent: 94000 maxAlt: 95000 minAlt: 10000 chosen_alt: 10000
0:45:01.226 D/ATC: p2(N02XP): Cleared IFR
0:45:01.226 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.779915 lon:14.194077 ele(ft):10000.000000 psi:290.840820 spd(kts):167.250015
0:45:01.226 D/ATC: p2(N02XP): FlyToPoints
0:45:01.226 D/ATC: p2(N02XP): Maintain 10000ft
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cumulus congestus layer alt 1752.000000 size 50000.000000 density 0.666667
SkyMaxx Pro: Created cirrus layer alt 9000.000000 thickness 0.000000
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 93889.062500
0:45:23.741 I/ATC: Airport flow changed at LJDI!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:45:23.741 I/ATC: Changing LJDI CabState from 0 to 1
0:45:23.741 I/ATC: All departures are done at LJDI. Advancing...
0:45:23.741 I/ATC: Changing LJDI CabState from 1 to 2
0:45:23.741 I/ATC: All arrivals are done at LJDI. Advancing...
0:45:23.741 I/ATC: Changing LJDI CabState from 2 to 0
0:45:23.741 I/ATC: Airport flow changed at LOWK!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:45:23.741 I/ATC: Changing LOWK CabState from 0 to 1
0:45:23.741 I/ATC: All departures are done at LOWK. Advancing...
0:45:23.741 I/ATC: Changing LOWK CabState from 1 to 2
0:45:23.741 I/ATC: All arrivals are done at LOWK. Advancing...
0:45:23.741 I/ATC: Changing LOWK CabState from 2 to 0
0:45:23.741 I/ATC: Airport flow changed at LIPI!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:45:23.741 I/ATC: Changing LIPI CabState from 0 to 1
0:45:23.741 I/ATC: All departures are done at LIPI. Advancing...
0:45:23.741 I/ATC: Changing LIPI CabState from 1 to 2
0:45:23.741 I/ATC: All arrivals are done at LIPI. Advancing...
0:45:23.741 I/ATC: Changing LIPI CabState from 2 to 0
0:45:33.274 I/ATC: Airport flow changed at LOIJ!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:45:33.274 I/ATC: Changing LOIJ CabState from 0 to 1
0:45:33.274 I/ATC: All departures are done at LOIJ. Advancing...
0:45:33.274 I/ATC: Changing LOIJ CabState from 1 to 2
0:45:33.274 I/ATC: All arrivals are done at LOIJ. Advancing...
0:45:33.274 I/ATC: Changing LOIJ CabState from 2 to 0
0:45:42.041 I/ATC: p2(N02XP) Popup FP filed to LYPG at 9000 via 4642N01337E ZAG TZU POD , type=2
0:45:42.041 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 334.936340 maxDescent: 83000 maxAlt: 83000 minAlt: 9000 chosen_alt: 9000
0:45:42.041 D/ATC: p2(N02XP): Cleared IFR
0:45:42.041 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.951744 lon:12.800035 ele(ft):9000.000000 psi:112.478600 spd(kts):167.250015
0:45:42.041 D/ATC: p2(N02XP): FlyToPoints
0:45:42.041 D/ATC: p2(N02XP): Maintain 8999ft
0:45:55.091 W/ATC: p2(N02XP): Wrist Slap!
0:45:55.091 I/ATC: p2(N02XP) Popup FP filed to EDWO at 10000 via 4658N01343E MAH WUR WRB , type=2
0:45:55.091 D/ATC: Validating altitude for p2(N02XP): filed: 10000 usable_rte_dist: 337.993347 maxDescent: 84000 maxAlt: 84000 minAlt: 10000 chosen_alt: 10000
0:45:55.091 D/ATC: p2(N02XP): Cleared IFR
0:45:55.091 I/FLT: Init dat_p2 type:loc_specify_lle lat:46.769253 lon:14.124183 ele(ft):10000.000000 psi:308.391327 spd(kts):167.250015
0:45:55.091 D/ATC: p2(N02XP): FlyToPoints
0:45:55.091 D/ATC: p2(N02XP): Maintain 10000ft
0:46:00.407 I/ATC: p3(N03XP) Popup FP filed to SBBP at 10000 via 4703N01325E TNT VOG CNM FJR CLE MJV BAVER VSJ ORA ARI MKS SLK MAK GLM TNN MBA LAY LALTO BAMEL LGM UDATI 2518N 2419N 2320N 2322N TENPA CVS SNT 1525N 1527N 1529N 1427N 1429N APOXA 1131N 1133N 1135N 1137N 1139N 1141N 1143N 1145N BISUK 0947N 0845N 0746N 0647N 0447N BEL TUI CJS 0850W PMS PNC RUSTE FRM LUZ ULD RPR BGC , type=2
0:46:00.407 D/ATC: Validating altitude for p3(N03XP): filed: 10000 usable_rte_dist: 5712.137695 maxDescent: 1428000 maxAlt: 1431000 minAlt: 10000 chosen_alt: 10000
0:46:00.407 D/ATC: p3(N03XP): Cleared IFR
0:46:00.407 I/FLT: Init dat_p3 type:loc_specify_lle lat:47.308048 lon:13.974886 ele(ft):10000.000000 psi:236.818161 spd(kts):97.759834
0:46:00.407 D/ATC: p3(N03XP): FlyToPoints
0:46:00.407 D/ATC: p3(N03XP): Maintain 10000ft
0:46:27.040 I/ATC: p2(N02XP) Popup FP filed to LYTV at 9000 via 4701N01315E RJK SPL DBK , type=2
0:46:27.040 D/ATC: Validating altitude for p2(N02XP): filed: 9000 usable_rte_dist: 300.144348 maxDescent: 75000 maxAlt: 75000 minAlt: 9000 chosen_alt: 9000
0:46:27.040 D/ATC: p2(N02XP): Cleared IFR
0:46:27.040 I/FLT: Init dat_p2 type:loc_specify_lle lat:47.367317 lon:12.996034 ele(ft):9000.000000 psi:152.579163 spd(kts):167.250015
0:46:27.040 D/ATC: p2(N02XP): FlyToPoints
0:46:27.040 D/ATC: p2(N02XP): Maintain 8999ft
0:46:42.373 I/ATC: Airport flow changed at EDNK!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: West
0:46:42.373 I/ATC: Changing EDNK CabState from 0 to 1
0:46:42.373 I/ATC: All departures are done at EDNK. Advancing...
0:46:42.373 I/ATC: Changing EDNK CabState from 1 to 2
0:46:42.373 I/ATC: All arrivals are done at EDNK. Advancing...
0:46:42.373 I/ATC: Changing EDNK CabState from 2 to 0
0:47:04.354 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:47:04.579 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:47:04.699 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:47:04.790 I/SCN: DSF load time: 403821 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+48+013.dsf (0 tris)
0:47:07.072 I/SCN: DSF load time: 2742971 for file Custom Scenery/Aerosoft - EDDM Munich/Earth nav data/+40+010/+48+011.dsf (0 tris)
0:47:07.248 W/ATC: Altitude Alert: p2(N02XP), Needs to CLIMB to 9000.000000, Cur_Indi: 7308.654785, Cur_Pres: 7126.280762, Last: 9021.883789
0:47:07.248 D/ATC: p2(N02XP): Maintain 8999ft
0:47:07.771 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:47:08.505 I/SCN: DSF load time: 1413545 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+48+011.dsf (0 tris)
0:47:09.773 I/SCN: DSF load time: 4982786 for file Custom Scenery/w2xp_Europe_3_Central-North/Earth nav data/+40+010/+48+013.dsf (0 tris)
0:47:11.672 I/SCN: DSF load time: 1884571 for file Custom Scenery/w2xp_Europe_4_Central-South/Earth nav data/+40+010/+48+013.dsf (0 tris)
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cumulus congestus layer alt 1766.010010 size 50000.000000 density 0.333333
SkyMaxx Pro: Created cumulus congestus layer alt 1973.000000 size 50000.000000 density 0.666667
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 96217.679688
 
 
 

Share this post


Link to post
Share on other sites

I'm no LOG expert either, but you might overload your system. How much RAM do you have installed? The latest versions of W2XP, combined with europe library really need a lot of RAM. Do you use the extended DSF option?

Same applies to your VRAM, 1.5 GB isn't much and shortage of VRAM is a known cause for lags and stutters.

 

You could try to disable W2XP scenery and extended DSF, reduce texture resolution one notch and see what happens. On the other hand I would expect X-Plane to pop up a warning about running out of memory.

 

Maybe someone elso is more up to this...

Flo


Flo B.

Share this post


Link to post
Share on other sites

I'm no LOG expert either, but you might overload your system. How much RAM do you have installed? The latest versions of W2XP, combined with europe library really need a lot of RAM. Do you use the extended DSF option?

Same applies to your VRAM, 1.5 GB isn't much and shortage of VRAM is a known cause for lags and stutters.

 

You could try to disable W2XP scenery and extended DSF, reduce texture resolution one notch and see what happens. On the other hand I would expect X-Plane to pop up a warning about running out of memory.

 

Maybe someone elso is more up to this...

Flo

 

6 gb of ram..Yes i use DSF. I did reduce texture resolutiion to high.I left it there because at the bottom of the window it read "Total size of all loaded textures at current settings: 480 meg" :since 480meg is way below 1.5gb i thought it was ok.( I tried setting  the rendering options  using this : http://www.x-plane.com/?article=setting-the-rendering-options-for-best-performance) as reference.

 

What i  found strange is that the sim would go nuts only around lows.

 

tia

   

Share this post


Link to post
Share on other sites

6 GB RAM? Never heard of this... Not much anyway.

Don't let "the size of loaded textures" fool you. It's only a PART of the actual usage of your VRAM. Total VRAM usage will be much higher, check with a GPU tool like GPU-Z. Check your RAM usage too.

 

But maybe there is something in the scenery at LOWS that is buggy (but nothing on the LOG about that) or it's just very demanding due to good OSM coverage and a lot of mountains.

 

Flo


Flo B.

Share this post


Link to post
Share on other sites

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    33%
    $8,485.00 of $25,000.00 Donate Now
×
×
  • Create New...